Author Topic: Disco double air tube - improved version - opinions wanted (Read 29964 times))

lloyd-ss · « **Reply #80 on:** January 24, 2012, 07:24:52 AM »

degriz,
Yes, I have a list going and I just added your name.

I am working on a website with pics and info and will have that up and running in about a week. I will PM people and have a link to it from here, also.
Plus, I will keep posting about it here, too.
Lloyd

MustangMike · « **Reply #81 on:** January 27, 2012, 03:46:28 PM »

Can't wait to see the twin tube disco in that katana stock

lloyd-ss · « **Reply #82 on:** January 30, 2012, 11:46:25 PM »

Hello everyone,
I now have a website for the Disco Double kit. It will also be in the GTA Mall very shortly. That will give you a direct link to the website, which is:

www.airgunlab.com

Take a look! My wife does nice work!
Thanks,
Lloyd

melvin · « **Reply #83 on:** January 31, 2012, 12:12:45 AM »

Nice site Loyd.

MustangMike · « **Reply #84 on:** January 31, 2012, 12:25:05 AM »

Very nice site lloyd, I think ur going to make a decent fairly consistant income from the sales

sawtoothscream · « **Reply #85 on:** January 31, 2012, 01:23:12 AM »

so whats the final price on this?

lloyd-ss · « **Reply #86 on:** January 31, 2012, 03:32:55 AM »

Quote from: sawtoothscream on January 31, 2012, 01:23:12 AM

so whats the final price on this?

Sorry, but I don't have a "final" price yet. I am still working on the pricing for the CNC turning work and finishing. Sign up at the website (no obligation, of course)
www.airgunlab.com
for all the info about the kit and look in the general FAQs for pricing. If you sign up for info on the website I will be able to send you an update when I finalize the price. It will fall between $100 and $195 depending on finishes and options, and I definitely want to keep the price as low as possible.
Lloyd-ss

gene_sc · « **Reply #87 on:** January 31, 2012, 04:39:02 AM »

Lloyd now has his own Vendors Gate to discuss pricing and information regarging the new Disco Double. Please bookmark his Gate for all updates and information regarding the Disco Double.
Congratulations Lloyd

http://www.gatewaytoairguns.org/GTA/index.php/board,142.0.html

Thanks
Gene

Rescue35 · « **Reply #88 on:** January 31, 2012, 09:17:03 PM »

Just wanted to jump in and say nice web site. Your wife did a good job. Plus it is nice to see innovation at work.

lloyd-ss · « **Reply #89 on:** February 01, 2012, 12:00:17 AM »

Thanks everyone. My wife takes the website work seriously! And in doing it, she's become fairly knowledgeable about PCPs.

Lloyd-ss

newguyontheblock (Nathan) · « **Reply #90 on:** February 01, 2012, 01:22:15 PM »

great job loyd, the double tubeis awesome!!
your wife did a good job on the website too

maybe now you can get her into PCP's, youll have a good shooting partner!

mylessr · « **Reply #91 on:** February 02, 2012, 06:14:08 PM »

have you tested it for 3000 psi yet, can it work on m rod. Nice site and great work

lloyd-ss · « **Reply #92 on:** February 02, 2012, 07:10:20 PM »

Quote from: mylessr on February 02, 2012, 06:14:08 PM

have you tested it for 3000 psi yet, can it work on m rod. Nice site and great work

The Disco itself is not up to the 3000 psi task.

Please look at this thread for the reasons for sticking with the 2000 psi fill.
http://www.gatewaytoairguns.org/GTA/index.php/topic,25091.0.html

I have tested the various parts and pieces of the kit to 3000 psi, though.

The Mrod has a different size tube. The concept will work, but this kit won't fit.
Lloyd-ss

Kilo511 · « **Reply #93 on:** February 03, 2012, 06:14:24 PM »

Very nice kit you have here. All these mods are making me want to get my disco all the more sooner. Can't wait to get the gun and install this kit. Keep up the good work.

lloyd-ss · « **Reply #94 on:** February 04, 2012, 09:35:23 AM »

Hi everyone,
Thanks very much for all the interest and comments about the double air tube setup for the Disco, the Disco Double kit. If you have any curiosity about the kit, please take a look at the thread listed below. I have posted some updated info there.

Thanks very much,
Lloyd

http://www.gatewaytoairguns.org/GTA/index.php/topic,25338.new.html#new

ray in wi · « **Reply #95 on:** February 12, 2012, 09:14:31 PM »

Lloyd
Awesome concept! I had the idea myself but not the talent to pull it off! LOL! Anyway I found your site and signed up for one (raw or unfinished if you please). Any plans for doing the same with the Marauder plateform?
Ray

bambazonke01 · « **Reply #96 on:** February 12, 2012, 09:39:59 PM »

Lloyd,
I have a couple of comments,
Great and simple idea on your part.
You cant Anodize chrome moly. You can only Anodize Aluminum.
I think you have a filler valve on the new tube. Why not just have a cap at the front end for possible cleaning purposes . Why not just a cap at both ends just to seal it . If the two tubes are connected together and the connection is sealed by O rings or some such method then you only need the one filler valve on the upper tube.
You will probably need a small spacer block between the two tubes so that the 2nd doesn't jam against the upper filler tube. This would mean welding the block on the lower new tube and contouring the upper surface of the block for a tight contact with the circumference of the upper tube.
This is starting to get difficult to manufacture. Maybe you could explain your idea further.
Jim

lloyd-ss · « **Reply #97 on:** February 13, 2012, 07:55:08 AM »

Quote from: ray in wi on February 12, 2012, 09:14:31 PM

Lloyd
Awesome concept! I had the idea myself but not the talent to pull it off! LOL! Anyway I found your site and signed up for one (raw or unfinished if you please). Any plans for doing the same with the Marauder plateform?
Ray

Nothing for the m-rod at this time. After the Disco is going well, there will be other things.

lloyd-ss · « **Reply #98 on:** February 13, 2012, 07:57:40 AM »

Quote from: bambazonke01 on February 12, 2012, 09:39:59 PM

Lloyd,
I have a couple of comments,
Great and simple idea on your part.
You cant Anodize chrome moly. You can only Anodize Aluminum.
I think you have a filler valve on the new tube. Why not just have a cap at the front end for possible cleaning purposes . Why not just a cap at both ends just to seal it . If the two tubes are connected together and the connection is sealed by O rings or some such method then you only need the one filler valve on the upper tube.
You will probably need a small spacer block between the two tubes so that the 2nd doesn't jam against the upper filler tube. This would mean welding the block on the lower new tube and contouring the upper surface of the block for a tight contact with the circumference of the upper tube.
This is starting to get difficult to manufacture. Maybe you could explain your idea further.
Jim

Jim, it's all explained on the website, www.airgunlab.com
Lloyd

N.E.Dan · « **Reply #99 on:** February 15, 2012, 12:07:22 PM »

Imagine that our very own American Sam Yang!

I love it!

Thank you to our advertisers!

Disco double air tube - improved version - opinions wanted

Author Topic: Disco double air tube - improved version - opinions wanted (Read 29964 times))

Kilo511

bambazonke01