Sheridan Blue Streak trigger guard

[sweatyk]

Does anyone have a source for replacement split rivets that hold the trigger guard on? I've seen on other threads here where machine screws with nuts were used and probably a few other things. I would prefer to keep it as it was built if possible. Nothing on Amazon looked like it would be a good fit. One of mine would be a tight fit but the other I can push in with my finger. I saw where some here repurposed the original ones by heating them and going through the process of hardening them. That will be my last resort if I can't find any replacements. So does anyone have any to sell or know where to find some?

[Robert 5mm]

Has most everything

https://www.mcmaster.com/

[eeler1]

Have you tried the usual suspects?  Mike Baker (here at gta, try a PM) or Precision Pellet?

[xcalibur]

James Valdez on ebay. Check out his other items while your at it.
https://www.ebay.com/itm/116446257482?_skw=sheridan+stock+rivet&itmmeta=01JX3WQGHRHBS5M5CZ37HCF1B9&hash=item1b1cbce14a:g:AfwAAOSwe75nhc39&itmprp=enc%3AAQAKAAAA0FkggFvd1GGDu0w3yXCmi1ccpMPZ9MBJXrPPATfhtRrBe%2FCns0x9nuly6O7imq12JuTHjPdIlmvxGnqIFWWSyrk4%2BaA90t3jkv7vtpxhyKCJUDu2y01A8DtFOQ9iumKYamTFZy8S5NvI%2FPMl114%2BpERYux0FAteVXO5%2FsTgcCoWvbu7XIWcSPUNUHK3S9susIDaK7cMx%2FnIF3Tl7gmrUC3RSrTCmboc2dO48x8CgbXB1aeER9mYK2N72j%2FQhMq0MwT6s0VnFlIgyGruczorllYI%3D%7Ctkp%3ABk9SR5SJ3vzoZQ