Avenge-X Bore Center to Block Height Measurement?

[mwgm2020]

Anyone have the Avenge-X height measurement from the barrel bore center to the top of the breach bloc where the scope is mounted?

I'm setting up the gun profile in ballistic apps and not able to get to my gun to measure it to get the scope height.  The rings and scope measurements I can get from documentation. 

[mwgm2020]

I was able to measure the gun and found the top of the breach block ring scope mount to the center of the barrel bore which is 13.5mm.

I measured the scope objective OD (SoOD), the barrel/shroud OD (BSOD), top of scope to top of barrel/shroud (TSTB), and used the rings manufacturer's data for the rings center height.  I subtracted from TSTB 1/2 SoOD to find the rings center height (RCH), then subtracted the RCH to find the ring mount height.  I then added 1/2 the barrel/shroud OD to find the ring mount to bore center distance.

TSTB - 1/2 SoOD - RCH + 1/2 BSOD = rings mount to bore center 15.5mm