Pinty's Flashpup

[Xraycer]

...I hate these magazines! They are trash in every way in my opinion. A backwards loaded pellet waiting to happen!  Glad I ordered the aftermarkets.

I think they're fine. I've used better and I've used worst. These fall somewhere in-between. At least they work, unlike the Notos' magazines.

Yeah, I've got a Notos as well. One use and I ordered a handful of the Maple after markets for it as well. I even have one of the 15 rounders for it. They work like a champ.

I've got their single loader, and I actually prefer that over magazines when I'm bench shooting.

[JimT66]

Got my P-Pup in this afternoon!  Gave it a good going over, checked all my screws, cleaned the bore. All nice and shiny now. Added my Pinty scope and mounts, filled her with air, no leakage heard, but have it sitting until tomorrow.  Only thing  is, I hate these magazines! They are trash in every way in my opinion. A backwards loaded pellet waiting to happen!  Glad I ordered the aftermarkets.

Checked it a few minutes ago, no air leaks! Gonna give my coffee time to kick in, then got see if I can get her zeroed in at 20. Yards. Already have a selection of 5 pellet types and weights to try.

Yay! Glad it has arrived, and looking forward to your experiences with it.

[JimT66]

So has anyone gotten the correct rail on the Bullpup?

  According to my Ser.#, I have number 19, and the rail is correct. it just arrived today, and that was the very first thing I checked for. Maybe I got lucky!

If you're using Pinty mounts, it will fit fine. It's the other standard picatinny mounts that will not fully clamp onto the P-pup's rail.

Yep, Pinty mounts. After reading the issues others had, I figured go ahead and play it safe. I was kinda naive, thinking after checking post dates, surely problem been fixed, since date of others were in Feb. Lol, apparently not so much, since I got a lower serial numbered rifle. Glad I took the safe route and went Pinty for scope and mount. Scope is actually pretty nice too, side focus, pretty clear glass.

[Xraycer]

Yay! Glad it has arrived, and looking forward to your experiences with it.

Checked it a few minutes ago, no air leaks! Gonna give my coffee time to kick in, then got see if I can get her zeroed in at 20. Yards. Already have a selection of 5 pellet types and weights to try.
[/quote]
I can tell you right now to not even bother with CPHP.

[JimT66]

Yay! Glad it has arrived, and looking forward to your experiences with it.

Checked it a few minutes ago, no air leaks! Gonna give my coffee time to kick in, then got see if I can get her zeroed in at 20. Yards. Already have a selection of 5 pellet types and weights to try.

I can tell you right now to not even bother with CPHP.
[/quote]
 Hahahahaha, yeah, I've been seeing that as well! Nope, not even gonna give them a try. I will save those for my 392,  362, and Arrow. They love them. No sense in wasting their food.

[Xraycer]

Yay! Glad it has arrived, and looking forward to your experiences with it.

Checked it a few minutes ago, no air leaks! Gonna give my coffee time to kick in, then got see if I can get her zeroed in at 20. Yards. Already have a selection of 5 pellet types and weights to try.

I can tell you right now to not even bother with CPHP.
[/quote]
 Hahahahaha, yeah, I've been seeing that as well! Nope, not even gonna give them a try. I will save those for my 392,  362, and Arrow. They love them. No sense in wasting their food.
[/quote]
To this day, I'm still shocked at how much the Notos likes CPHP.

[JimT66]

Yay! Glad it has arrived, and looking forward to your experiences with it.

Checked it a few minutes ago, no air leaks! Gonna give my coffee time to kick in, then got see if I can get her zeroed in at 20. Yards. Already have a selection of 5 pellet types and weights to try.

I can tell you right now to not even bother with CPHP.

Hahahahaha, yeah, I've been seeing that as well! Nope, not even gonna give them a try. I will save those for my 392,  362, and Arrow. They love them. No sense in wasting their food.
[/quote]
To this day, I'm still shocked at how much the Notos likes CPHP.
[/quote]
 Well that would two of us. Mine loves them too. The Crosman was the first pellet I tried with mine, from 10 yards out near 40. I never bothered with anything else. I figured why, when they drop the starlings, blue jays and tree rats perfectly. Just feed it the cheap stuff, save my JSB's and H&N's for my more picky guns. I'm glad I was bringing an extra can or two of them outta Wally World every time I went in now, since all my pumpers and a couple of my pcp's love them so much.

[JimT66]

Since Pinty does not have extra magazines, and refuse to answer my issues with the factory.mag being busted when delivered, I have contacted and shipped the bad one to Milton, he makes and sells several types of excellent magazines on fleabay, He goes by.name of 1dumpster. I have a bunch of his mags for.my Notos, and several for.my Beeman .25 Raider. I Highly recommend his work.

[smythsg]

James, aftermarket mags are available for the Pinty Bullpup from another seller if it doesn't work out with Milton... Just FYI

[Papa T]

Would one of you fine pup owners be able to give me air tube size? I think it is 32mm like the rifle, but want to get correct measurements for Red Corn Outdoors, so that he can offer a tube only pic band option. Thanks for the assist.

[bduares]

Would one of you fine pup owners be able to give me air tube size? I think it is 32mm like the rifle, but want to get correct measurements for Red Corn Outdoors, so that he can offer a tube only pic band option. Thanks for the assist.

Like this?

I found a clip on air tank tube accessory picatinny rail 3D printer file set that perfectly matches my QM-23 on Cults3D for less than $4. I printed one out, spray painted it black, and it works great. The air tank tube on the QM-23 is 30mm. The file set contains 3 different types of rail: bottom only, sides only, or the one I printed which has all 3.

https://cults3d.com/en/3d-model/various/clip-on-rails-for-pcp-airguns-30-32mm-tubes-umarex-notos-etc-low-profile-picat

[Papa T]

Exactly that, that I missed somehow despite several readings to find. Thank you.

[bduares]

The clip on tube rails I printed fit the tube nicely, but they needed a couple of pieces of electrical tape on them to make the bipod I bought fit tight without any wobble.  Once I put tape on it all was good

[JimT66]

The clip on tube rails I printed fit the tube nicely, but they needed a couple of pieces of electrical tape on them to make the bipod I bought fit tight without any wobble.  Once I put tape on it all was good

Where did you put the tape to stop the wobble?

[bduares]

Lay some strips of tape on top of the slots in the same direction as the rail, barrel to stock direction, as a shim.

[Papa T]

So my brother bought 2 of (maybe last 2 of) the P-Pups, one for him and one for my dad. My dad's is leaking, and after talking with Pinty they determined it is the breech o-ring and sent him a "detailed video" for repair. All of the talking is in Chinese, but I uploaded it to YT so that he could watch. It shows degassing, disassembly, repair, and reassembly. Maybe YouTube will even build auto-caption for me down the road and I'll have an idea of what they are trying to say, but video shows everything pretty well. Unlisted video, but here is the link for any who want to watch.

[Xraycer]

So my brother bought 2 of (maybe last 2 of) the P-Pups, one for him and one for my dad. My dad's is leaking, and after talking with Pinty they determined it is the breech o-ring and sent him a "detailed video" for repair. All of the talking is in Chinese, but I uploaded it to YT so that he could watch. It shows degassing, disassembly, repair, and reassembly. Maybe YouTube will even build auto-caption for me down the road and I'll have an idea of what they are trying to say, but video shows everything pretty well. Unlisted video, but here is the link for any who want to watch.

Nice!

[smythsg]

Thanks Terry, great information!

[bduares]

Video downloaded. Thank you!

[Papa T]

Unfortunately after repair attempt the gun is still leaking, safety doesn't keep gun from firing, gun was hard to cock and would fire easy. Pinty is swapping it for a working used one. They are depending on buyers to be their own gunsmith, as they lack technical ability.