Benjamin Marauder single shot tray?

[avator]

Dan (scion19801) has printed a lot of items for me in the past.  This would include a very nice Marauder single shot tray with inserts for different calibers.  You might send him a PM.

That's pretty handy right there.

[Matchstickshooter]

 well it may be a while.   Now at a standstill.   
 I am setting this to run on bulk Co2 and had it pretty good last night.  Was just going to try it out again today and sight it in on my pellet trap.
        it leaked down overnight.
   Proceeded to refill it. Shut the tank off, slide the little check sleeve on the hose and took it off. Went off with a Pop and all the gas leaking out the Foster (?) fill fitting.

Looking at the end of the fitting I see what looks like a tightly balled up screen! Checked fittings on my other two guns, no such thing.
So maybe came out of the fitting on the hose....
 Got a pick and dug it out. Blew out the fitting with canned air, and retried gassing it up. gasses up fine,then leaks all out when you disconnect.

Done for today.

[Privateer]

PM me with your address and I'll send you a 3D printed tray.

[Matchstickshooter]

 I got back on it. found a post here from years back and followed advice.  devil of a time getting the fitting out...some kind of black tape on the threads.
 I almost gave up. Finally got it out and the seal on the check valve was in pieces.
   I dug around in my seals.  9mm seal from a P17 works beautiful!  Doesn't leak!
All back together, and now out of gas.    Grrr.

[triggertreat]

Dan (scion19801) has printed a lot of items for me in the past.  This would include a very nice Marauder single shot tray with inserts for different calibers.  You might send him a PM.

That's pretty handy right there.

Works great.  Dan does good work and has helped me out a bunch in the past with needing lefthanded parts.  It looks like he may have tapped out on the GTA with his last post being in April 2023.  I have seen him on another forum, but I haven't been there in a while myself.

[3crows]

https://maplecustomproducts.com/products/umarex-gauntlet-single-shot-loader?variant=45026141077756

[crazyhorse1]

This would be the Mrod.   this ones .25

 What would a 3D one cost??

Think he charged around $20 bucks or so,?

Another option is CARM,,,,  WWW,carm-magazines,com

[jimbo]

I think that Carm magazines are the way to go, much better then the original Marauder magazines.

[HunterWhite]

Keith, is that a left hand load SST, or is the picture reversed?

Hunter

[3crows]

I have the fold out type from Maple Custom Products. Works great and the orange color makes it hard to loose.

[Matchstickshooter]

 So got down to the back lawn today and put 2 clips through the Benjamin Marauder .25. I go back and forth between tray and clip. Tray for indoors. Clip will be when my neighbor calls on me to rid him of a woodchuck.
 I have it running on CO2. Got back in and tweaked the adjustments a bit more, for a bit more power.
  Lugging this around is work!  Heaviest gun I have.

[Back_Roads]

 I bet in .25 and CO2 it puts out quite the thump

[Matchstickshooter]

I bet in .25 and CO2 it puts out quite the thump

Okay, so far.   
The distance I'm shooting there's no problem(!) drilling through both sides of a bean can.
 but, wow, this is a heavy rifle.

[Bicycleman]

"wow, this is a heavy rifle."
My brother made a similar comment when I handed him my Marauder as we were crossing a fence.

[avator]

A while back JSAR was selling a light weight tube that took about 1 1/2 pounds off the gun mainly towards the front. I put one on mine before I sold it. It really did make a huge difference.

[Back_Roads]

 I made my Marauder heavier to use as a bench gun, I need a wagon to get it to the range

[Matchstickshooter]

I made my Marauder heavier to use as a bench gun, I need a wagon to get it to the range

I do have a bipod for it, and no use for it or place to set it up

[bnowlin]

I made my Marauder heavier to use as a bench gun, I need a wagon to get it to the range

Same here.  If I can't hit anything from the back deck. Then it doesn't get shot.  LOL
Bob

[triggertreat]

Keith, is that a left hand load SST, or is the picture reversed?

Hunter

No, it loads from the right side.

[triggertreat]

A while back JSAR was selling a light weight tube that took about 1 1/2 pounds off the gun mainly towards the front. I put one on mine before I sold it. It really did make a huge difference.

It sure does.  I have those lightweight tubes on both of my Marauders.  Made them like new guns and much more enjoyable.