$40 off Pinty Airguns

[Whirligig]

I've eyed these rifles ever since the original posting and have  been tempted many times but I keep telling myself I already have a nice .22 bullpup, already have an Air Force Talon and Condor in .22 and already have more than a few other .22 PCP's so I've been able to avoid hitting the "order" button..... but I must admit I'm still tempted..

Jeff

I didn't order the pup or the carbine for the same reasons. But I don't have an AirForce so I couldn't resist that one.

I'm more of a traditional wood and metal fan. Also, I've satisfied any itch that I had to own "tactical-looking" air rifles with Hatsan AT44s. What do you think of the PINTY LT11?

-W

[longislandhunter]

Bill, if I was to give in and order one that would be the one I'd order, especially since it's regulated.      Darn, now you have me thinking about it again......

Jeff

[avator]

Jeff..
If you're on the fence like it sounds like you are, you might want to take the leap. As I reported in another thread, Nick at Huben confirmed that they sent a batch of the Cricket regulators to a factory that Pinty had developed into these guns. I did not see where they said how many were in the batch or if there would be anymore available.
That makes me wonder if these are a one and done thing.

[longislandhunter]

Yeah, I'm starting to weaken, have to dwell on this for a few more hours and see what happens 

Jeff

[avator]

I'm rootin' for ya..  lol

Don't forget to use the "GTA" discount code.

[Whirligig]

Does anyone know where to buy extra mags for the PINTY bullpup and carbine, and what mags they use?

Thanks!

-W

Just FYI, I emailed PINTY, and they don't have extra magazines.

-W

I emailed PINTY again asking if there were aftermarket magazines for the QL22 and QM23 air rifles.

PINTY support suggests trying the JTS .22 magazine as a compatible aftermarket option for the QL22 rifle.

They wrote that they were not able to provide specific information on aftermarket magazines that are compatible with the QM23 rifle.

-W

[rkrr20307@comcast.net]

For the P-RIFLE I found my BARRA 1100Z mags will work. They are $12.00 and load easy. The difference is they load from the right side not the left.

[Whirligig]

For the P-RIFLE I found my BARRA 1100Z mags will work. They are $12.00 and load easy. The difference is they load from the right side not the left.

Thanks!

I've been searching the web for magazines that will fit the bullpup with no success. 

I just looked at the Barra mag online, and it looks like it will fit the QM23 bullpup. Is that what you were saying?

https://www.academy.com/p/barra-airguns-1100z-22-rotary-magazine-

-W

[Whirligig]

For the P-RIFLE I found my BARRA 1100Z mags will work. They are $12.00 and load easy. The difference is they load from the right side not the left.

Thanks!

I've been searching the web for magazines that will fit the bullpup with no success. 

I just looked at the Barra mag online, and it looks like it will fit the QM23 bullpup. Is that what you were saying?

https://www.academy.com/p/barra-airguns-1100z-22-rotary-magazine-

-W

I've ordered three mags and a single shot tray directly from Barra.

I also ordered a .22 1100z Gen 2 Alpine, just so I can use the mags even if they don't fit the QM23 bullpup.

I'll post whether they fit the bullpup or not when they arrive, and you're all probably in for yet another unboxing video, as well.

-W

[smythsg]

Unfortunately the Barra mags will not fit the Bullpup.

[Whirligig]

Unfortunately the Barra mags will not fit the Bullpup.

Drat!

Thanks for letting me know!

-W

[smythsg]

I ordered one as well to try and unfortunately it did not fit. I thought I might be able to modify it to fit but don't think that will be possible.

[rkrr20307@comcast.net]

For the P-RIFLE I found my BARRA 1100Z mags will work. They are $12.00 and load easy. The difference is they load from the right side not the left. These do not fit the bullpup gun.

[Whirligig]

My second PINTY carbine arrived just in time to keep and the first carbine and the bullpup from getting lonely.

And no ménage à trois jokes will be tolerated unappreciated!

-W

[rkrr20307@comcast.net]

Waiting on my P-PUP to arrive. The trigger THAMMER did for the P-FORCE is so light and crisp. The P-RIFLE will be getting a makeover as the BARRA mags work fine in it. The trigger in the P-RIFLE is very lite also. Has anyone found a different mag to fit the P-PUP yet ?

[smythsg]

Unfortunately I have not found another mag to fit the PUP yet.

[naptemp]

Waiting on my P-PUP to arrive. The trigger THAMMER did for the P-FORCE is so light and crisp. The P-RIFLE will be getting a makeover as the BARRA mags work fine in it. The trigger in the P-RIFLE is very lite also. Has anyone found a different mag to fit the P-PUP yet ?

No magazines I know of.
I managed to 3D print a P35 single shot tray, which needed some adjusting with a heat gun to make it fit well.