Notos - my personal experience

[PasadenaMike]

This little carbine is pretty sweet. Right out of the box the trigger felt like 10 pounds or something , I didn’t measure it but I ended up adjusting it to about 3 pounds And it feels great. I installed a 2-7 power Hawke scope on it and a saber, tactical 34 mm Picatinny tube adapter which is very solid for installing a bipod or whatever. I had a chance to shoot it over the chronograph with Crossman premier hollow points. The results are 18 foot pounds average which is like 740, 50 ft./s. The gun is very quiet and it’s also very hand pump friendly . I can pump it from 2000 psi to about 3600 psi with less than 40 strokes on my hand pump. I think we have a winner as a cheap quiet short truck gun that shoots Crossman premier hollow points at minute of ground squirrel accuracy. I’m very picky with my guns so far I have not had any complaints about this.

[Rat Sniper (AKA: PaulT58)]

The more I shoot mine the more I like it!  You can get that trigger even smoother by just sanding that sharp tip off the adjustment screw!  It's super easy to access, but remove the stock and the 3 screws that hold the panel on over the trigger assembly.  The whole trigger slides right out and you can use some 320 grit wet/dry sandpaper to take the edge off that grub screw (you don't even have to remove it from the trigger)!  Add a dab of grease at the contact points and reassemble.  It won't make it any lighter, but it sure makes it smoother! 

[PasadenaMike]

The more I shoot mine the more I like it!  You can get that trigger even smoother by just sanding that sharp tip off the adjustment screw!  It's super easy to access, but remove the stock and the 3 screws that hold the panel on over the trigger assembly.  The whole trigger slides right out and you can use some 320 grit wet/dry sandpaper to take the edge off that grub screw (you don't even have to remove it from the trigger)!  Add a dab of grease at the contact points and reassemble.  It won't make it any lighter, but it sure makes it smoother! 

I’ll just wait until it wears out

[Rat Sniper (AKA: PaulT58)]

The more I shoot mine the more I like it!  You can get that trigger even smoother by just sanding that sharp tip off the adjustment screw!  It's super easy to access, but remove the stock and the 3 screws that hold the panel on over the trigger assembly.  The whole trigger slides right out and you can use some 320 grit wet/dry sandpaper to take the edge off that grub screw (you don't even have to remove it from the trigger)!  Add a dab of grease at the contact points and reassemble.  It won't make it any lighter, but it sure makes it smoother! 

I’ll just wait until it wears out

Or that...  ^^^^ 

[chutesnreloads]

How long have you had the Notos?

[kbstingwing]

I broke down and bought a Notos from Amazon, same price as everywhere else, should be here monday, (if I am still here), big storm with extras coming tonight, got the shelter all de-Bugged and killed all the Spiders, love my weed torch, it burns everything in it's path and More.... not likely to get hit, but with my luck.......

[PasadenaMike]

How long have you had the Notos?

I’ve had it for 3 days

[PasadenaMike]

I broke down and bought a Notos from Amazon, same price as everywhere else, should be here monday, (if I am still here), big storm with extras coming tonight, got the shelter all de-Bugged and killed all the Spiders, love my weed torch, it burns everything in it's path and More.... not likely to get hit, but with my luck.......

Congrats everyone seems to be liking them. Good luck on the storm

[smythsg]

There's one in my near future for sure...

[starlingassassin]

i seriously am diggin mine 

over the last couple days ive put 2 carm 12 shot magazines on a spinner i have in the yard at 13yds,
just off hand resting against a screen door,
and 24 shots made a nice round group of about a half inch.

was getting some flyers once in a while with jsb 15.89,
so tried some fx 15.89 and the flyers went away

guess i got a good barrel lol

[brewbear]

I'll just wait for Mike to get tired of it and buy it from him. We live close enough, I can just swing by, no need to ship it

[PasadenaMike]

I'll just wait for Mike to get tired of it and buy it from him. We live close enough, I can just swing by, no need to ship it

Lol so true. Only time will tell.

[brewbear]

I'll just wait for Mike to get tired of it and buy it from him. We live close enough, I can just swing by, no need to ship it

Lol so true. Only time will tell.

Take your time, enjoy it,  I can wait 

[splitbeing]

Reminds me of the pp750. Spent a lot of time with it then moved on. Its in the box it came in with other guns I imagine selling one day.

Great gun and worthy of all the attention, just not my speed/use in the long run of my airgunning adventure.  The modified sortie fills the role a bit better for me.

[tennx]

After a lot of reading ….I put one #3 on my to git list…..good luck

[Rat Sniper (AKA: PaulT58)]

After a lot of reading ….I put one #3 on my to git list…..good luck

Git-er done Phil!   

[smythsg]

Mine is on the way, should be here Wed next week...

[Rat Sniper (AKA: PaulT58)]

Congrats on the Notos Steve!

[kbstingwing]

mine showed up yesterday, did the trigger screw and adjusted, cleaned and aired up, my Spiritech compressor pumped it up in a little under 2 minutes from 0 to 3600psi, put a couple pellets through it over the chrony, 781fps average, put a UTG 4-16x44 compact scope on it with medium rings, perfect setup, now I just have to sight it in today, got some extra magazines coming from AGAF, should be here next week, I like the gun, it's lighter than my Prod, and easier to operate the side action, Crosman pellets are a little tight but they work, I'm going to try some JSB 14's and 15's, just to see if the group well.

[Firewalker]

mine showed up yesterday, did the trigger screw and adjusted, cleaned and aired up, my Spiritech compressor pumped it up in a little under 2 minutes from 0 to 3600psi, put a couple pellets through it over the chrony, 781fps average, put a UTG 4-16x44 compact scope on it with medium rings, perfect setup, now I just have to sight it in today, got some extra magazines coming from AGAF, should be here next week, I like the gun, it's lighter than my Prod, and easier to operate the side action, Crosman pellets are a little tight but they work, I'm going to try some JSB 14's and 15's, just to see if the group well.

Im starting to jones for a copy, sounds like it would be a great walk-around gun!