Finally baselined the settings on my Marauder

[Gixxer340]

So tonight I was finally able to sit down and see where the adjustment screws are set on my Marauder. I still don't have a chrony to make any changes but at least I know were I am starting.

Settings are
Hammer preload - 6.5 CW turns from fully CCW
Hammer stroke - 1 CW turn from fully CCW
Velocity metering - ~2.6 CCW turns from fully seated

I am not sure what this tune would be good for (lower pressure perhaps). but it seems like it is using a lot of air for having hte metering screw ay 2.6 turns. I use about 1000PSI for 30 shots of CPHPs. As soon as I get a chrony I will know more but I just thought I would share.

Jeff