My 909 is leaking

[pepegraves]

And o want to replace this fill port with 1 just like it...can't find it...anyone have a link to buy a fill receptor like the 1 in the pic...(the one that requires a probe)

[Wayne52]

Darrell if that's where it's leaking from it's a pretty common problem on pcp guns, if you can hear it leaking from there it probably only needs an o ring.

[pepegraves]

Darrell if that's where it's leaking from it's a pretty common problem on pcp guns, if you can hear it leaking from there it probably only needs an o ring.

Ok...Ill check that

[cosmic]

Or replace it with a foster fitting..

[pepegraves]

Or replace it with a foster fitting..

Yeah I ordered one of those but if I can find one of the original kind I'll use that one

[pepegraves]

Yep @Wayne52...it was a little o ring...looks like the old one dissolved...scraped it out, put a new 1 on (made sure I  lubed it good)...filled the 909...ready to go!...O happy day!

[cosmic]

Very Cool !!!

[Wayne52]

Yep @Wayne52...it was a little o ring...looks like the old one dissolved...scraped it out, put a new 1 on (made sure I  lubed it good)...filled the 909...ready to go!...O happy day!

Darrell I kinda figured that o ring might be the culprit, I've replaced several of those o rings on different makes and models.  There's one in particular I ended up calling
up the vendor who told me that from the factory they put the wrong one in on some of their guns, he told me the right one to buy and haven't had any problems since.  Glad to
hear you got it fix and happy hunting for sure

[sonnysan]

So where do people get their Korean guns tuned now since Saddle Mountain is no more? 
BTW, I cannot stand that fill port.  Every time I pull out the probe is really beats up the oring, so I leave it in.  Will used to offer the foster fitting option with these guns.   

[cosmic]

https://www.pyramydair.com/product/quick-disconnect-male-fitting-o-ring?a=2841

[lonedave]

So where do people get their Korean guns tuned now since Saddle Mountain is no more? 

I have an older Sam Yang 909 double tube that I'd like to look into having tuned and have the same question....Also maybe replacing the cocking handle with a stouter one....

[sonnysan]

People like me will learn how to work on them since I have too many.  I did buy spanning wrenches from a Career rebuild video a while back.  Haven't been motivated as of late since I just pick up another gun that is functional.  Maybe this topic requires a new thread.