Beeman 1358 Regulator

[Robert 5mm]

Does anyone know if the Lane Regulators for other Beeman PCP's fit the 1358

https://laneregulators.com/beeman

[starlingassassin]

i hope you find an answer,i am wondering the same thing.

[Robert 5mm]

Email reply from Lane:

The answer is a little tricky as in YES YES & Um No.

I have quite a range or regulators for Beeman rifles, however like with Brocock & Webley I have to ask you the customer to do some checks.

I have regulators to fit 3/4" / 22mm / 25.20mm / 28.35mm & 30.00mm Internal Diameter Reservoir Tubes, however I have had customers with 3 different size tubes on guns with the same name :-( !!!!!! so as you can image this has caused some issues and so I don't go out my way to promote them.

If you know the I.D. and what the Outlet Valve fixing is like then YES, I have a regulator to suit, if you don't know I wouldn't want to risk sending the wrong item out.

To measure I.D.


Robert Lane

[jjohnsonlta]

I have seen on Lane's sight they can custom build a regulator to fit many guns. If you go through and search several old posts on the 1358/1357 you will probably find what you need to know. One person did a regulator but had to have a part machined to get it to work since it was for another gun. The tube dimension I saw also in a post. I think from kerndtc on here.

[Jim Stephens]

in answer to a reg for the beman  series ,1357 / 1358/1359, yes they do. lance regs MK 9 lancet from lane regs. does . they have to know the ID of the air chamber to make sure that they send you the rite one. Note the air chamber for the Chief, Chef 2 ,and 1357,8,& 9 are all the same , i checked with Peter at  Beman to make sure. they cost about 105 dollars plus tax mabe some shipping not sure ,but they are available.happy shooting.  Jim

[Robert 5mm]

Thanks for the info.

[rabbitguy]

Has anyone installed one? If so what were the results. I was thinking of getting one for mine.

[avator]

OK, I know this thread is about a regulator for the gun but I have a question.
I haven't seen a parts diagram for this gun and I seem to have alot of blowback in my face out of the breech where the mag goes in. I have yet to pull it apart but I wonder if there is an oring or something on the breech end of the barrel?
Again, I apologize for the off topic.

[x3baddad]

Bill  yes there is two on the barrel outer and the one in the breach I think the outer were 10 x 1

[avator]

Thanks Terry, I'll get into it tomorrow morning.

Please continue with regulator discussion.

[tennx]

  Deleted….