Talon Tunes .25 Marauder ?

[Talon22]

I second the last post. I would like to see the prices and what all is available for a .25 caliber m-rod. Very impressed with the air tube extension.

[be4meliz]

This is what was done to mine(.22)Call him and discuss what you want and need-.25 might be a bit more-but not much

23.8 inch lothar walther barrel {stock is 20}

polished target crown and in-lead                         185.00

threaded barrel muzzle with custom air stripper            55.00

shroud ext with baffles {to fit }                          48.00

custom 30 inch air tube 315.3cc [stock is 23 215cc]185 or 100.00 w/trade in with old one

custom transfer port with new poly seals                   20.00

ported valve w/heavier spring (custom)                             90.00

heavy duty hammer spring                                   12.50

replace all orings and tune   275.00 standard (straight tune with no extras)            175.00 w/upgrades
hunting tune set up to shoot high 900's w JSB's

                        TOTAL COST   685.50

[justkillurself85]

So you have an airstripper inside an extended shroud and then beffles? Thats a lot stuffed in there! Can I ask why you also went with the airstripper?

[be4meliz]

Air stripper is required to bleed off HPA in order to quiet(along with baffles)-Standard barrel is 20" L/W- is 23 7/8" -standard M-rod has plastic stripper and plastic baffles(delrin)-he makes an aluminum stripper(threaded on barrel) and also aluminum baffles that do a better job of being quiet-or you can go with stock and he can cut off barrel and go with stock shroud and baffles-all depends on what you want and $,He's very reasonable for the work-just depends on what level you want to reach- can do basic tune and fix Crosman barrel-or green mtn. in the case of .25(which is probably done right)-thats why I say call and discuss- case by case situation- if it works-don't need to fix it-he's had to do a complete teardown on 3 g.davis builds that had no power and were NOT accurate-he will not do what is not necessary- mine is getting 1/2"cloverleaf@ 90 yds-he believes in video evidence to back what he promotes.if required I will post pic of 2 groups(1@ 45yds.-20shots and 4 @ 90yds)

[mrodmike]

caliber is not an issue as to the price My good buddy steve has posted my cost list
sorry for not getting a reply out last night but lost the comp for 3 hours. any questions
can be emailed to mike@citrus airguns.com 
 

[OldmanJunky]

Welcome mike -- I saw some "citrus" tuned mrods out there and wondered about that