Thank you to our advertisers!







Author Topic: Screw Threads and the H-28 Handbook  (Read 1309 times))

Offline OTmachine

  • Sharp Shooter
  • ****
  • Posts: 736
  • it'll shine when it shines
  • Real Name: Keith
Screw Threads and the H-28 Handbook
« on: March 18, 2021, 08:48:17 PM »
Pretty sure it is Okay to openly distribute this.  I have an original copy that I had scanned to a 16.5 MB .pdf file.  I think it would be useful here.  I can break it down into smaller consecutive pieces to upload here.   Or where should it go?   It is Good reference material.
Here is the cover page.  Any suggestions?
TIA,
Keith
  • USA, Central WI

Offline rsterne

  • Member 2000+fps Club
  • Bob and Lloyd
  • GTA Senior Contributor
  • *****
  • Posts: 26221
  • GTA Forums Person of the Year 2017
  • Real Name: Bob
Re: Screw Threads and the H-28 Handbook
« Reply #1 on: March 18, 2021, 08:59:00 PM »
I don't know how many sections it would make sense to break that file into.... but if you could make sensible divisions of maybe 2 Mb each, a total of about 8-10 files, and then post each one in a separate post in this thread, with a title so that guys can navigate it.... I think then it could be made a "sticky" in this gate.... It says right on it, distribution unlimited.... Maybe ask Rocker1 first how big a file they can handle?....

Bob
« Last Edit: March 18, 2021, 09:01:02 PM by rsterne »
  • Coalmont, BC, Canada
🇺🇦 Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since! 🇺🇦

Airsenal:
1750 CO2 Carbine, .177 Uber-Pumper, .22 Uber-Carbine, .25 Discovery, 2260 PCP 8-shot Carbine, 2260 HPA (37 FPE), 2560 HPA (52 FPE), XS-60c HPA in .30 cal (90 FPE), .22 cal QB79 HPA, Disco Doubles in .22, .25 & .30 cal, "Hayabusa" Custom PCP Project (Mk.I is .22 & .25 cal regulated; Mk.II is .224, .257, 7mm, .308 & .357; Mk.III is .410 shotgun and .458 cal), .257 "Monocoque" Benchrest PCP, .172/6mm Regulated PCP and .224/.257 Unregulated, Three regulated BRods in .25 cal (70 FPE), .30 cal (100 FPE) & .35 cal (145 FPE), .257 Condor (180 FPE).

Offline OTmachine

  • Sharp Shooter
  • ****
  • Posts: 736
  • it'll shine when it shines
  • Real Name: Keith
Re: Screw Threads and the H-28 Handbook
« Reply #2 on: March 27, 2021, 10:39:38 AM »
The original copy is not fantastic, but here is part 1 of 9.  See what you think.
TIA,
Keith
  • USA, Central WI

Offline JuryRigger

  • NUAH Club Member
  • GTA Senior Contributor
  • ******
  • Posts: 3848
  • Pop-Whiz-Clunk! :D
  • Real Name: Jesse
Re: Screw Threads and the H-28 Handbook
« Reply #3 on: March 27, 2021, 11:33:17 AM »
Downloaded that first part just now; looks like a good resource.
Thanks!
Jesse
  • Ohio
"Genius errs, if possible, more badly than pedantry. But mathematics, properly directed, cannot fail"-Captain Nemo

"Numbers don't lie until they're cherry-picked statistics"-Forest Addy

"You've got to keep your ego in check!"-Paul Harrell

Offline OTmachine

  • Sharp Shooter
  • ****
  • Posts: 736
  • it'll shine when it shines
  • Real Name: Keith
Re: Screw Threads and the H-28 Handbook
« Reply #4 on: March 27, 2021, 11:38:33 AM »
The original copy is not fantastic, but here is part 1 of 9.  See what you think.
TIA,
Keith
If it looks good to everyone, I will check that I have it divided up properly, and upload the rest tomorrow on this thread.
Keith
  • USA, Central WI

Offline WhatUPSbox?

  • Expert
  • *****
  • Posts: 1281
  • yes
  • Real Name: Stan
Re: Screw Threads and the H-28 Handbook
« Reply #5 on: March 27, 2021, 12:51:06 PM »
Good find.
If it is too big, the various parts of the standard and supplement pdf's are stored on the DTIC site.
  • N. San Diego County, CA

Offline WhatUPSbox?

  • Expert
  • *****
  • Posts: 1281
  • yes
  • Real Name: Stan
Re: Screw Threads and the H-28 Handbook
« Reply #6 on: March 27, 2021, 01:37:33 PM »
Maybe there could be a sticky with links to some of the relevant handbooks.

For example MIL handbook 5 with material properties

https://apps.dtic.mil/dtic/tr/fulltext/u2/a295150.pdf
  • N. San Diego County, CA

Offline OTmachine

  • Sharp Shooter
  • ****
  • Posts: 736
  • it'll shine when it shines
  • Real Name: Keith
Re: Screw Threads and the H-28 Handbook
« Reply #7 on: March 28, 2021, 11:09:35 PM »
Part 2 of 9
  • USA, Central WI

Offline OTmachine

  • Sharp Shooter
  • ****
  • Posts: 736
  • it'll shine when it shines
  • Real Name: Keith
Re: Screw Threads and the H-28 Handbook
« Reply #8 on: March 28, 2021, 11:10:12 PM »
Part 3 of 9
  • USA, Central WI

Offline OTmachine

  • Sharp Shooter
  • ****
  • Posts: 736
  • it'll shine when it shines
  • Real Name: Keith
Re: Screw Threads and the H-28 Handbook
« Reply #9 on: March 28, 2021, 11:10:51 PM »
Part 4 of 9
  • USA, Central WI

Offline OTmachine

  • Sharp Shooter
  • ****
  • Posts: 736
  • it'll shine when it shines
  • Real Name: Keith
Re: Screw Threads and the H-28 Handbook
« Reply #10 on: March 28, 2021, 11:11:26 PM »
Part 5 of 9
  • USA, Central WI

Offline OTmachine

  • Sharp Shooter
  • ****
  • Posts: 736
  • it'll shine when it shines
  • Real Name: Keith
Re: Screw Threads and the H-28 Handbook
« Reply #11 on: March 28, 2021, 11:11:58 PM »
Part 6 of 9
  • USA, Central WI

Offline OTmachine

  • Sharp Shooter
  • ****
  • Posts: 736
  • it'll shine when it shines
  • Real Name: Keith
Re: Screw Threads and the H-28 Handbook
« Reply #12 on: March 28, 2021, 11:12:34 PM »
Part 7 of 9
  • USA, Central WI

Offline OTmachine

  • Sharp Shooter
  • ****
  • Posts: 736
  • it'll shine when it shines
  • Real Name: Keith
Re: Screw Threads and the H-28 Handbook
« Reply #13 on: March 28, 2021, 11:13:09 PM »
Part 8 of 9
  • USA, Central WI

Offline OTmachine

  • Sharp Shooter
  • ****
  • Posts: 736
  • it'll shine when it shines
  • Real Name: Keith
Re: Screw Threads and the H-28 Handbook
« Reply #14 on: March 28, 2021, 11:14:00 PM »
Part 9 of 9
That's all Folks!
  • USA, Central WI

Offline JuryRigger

  • NUAH Club Member
  • GTA Senior Contributor
  • ******
  • Posts: 3848
  • Pop-Whiz-Clunk! :D
  • Real Name: Jesse
Re: Screw Threads and the H-28 Handbook
« Reply #15 on: March 28, 2021, 11:27:07 PM »
Downloaded  :D
Thanks!
And to add to the resources-here's the link to download the Parker O-Ring Handbook:
(Should bring it up as a PDF viewer; you then download it from there)
http://www.parker.com/Literature/O-Ring%20Division%20Literature/ORD%205700.pdf
Jesse
  • Ohio
"Genius errs, if possible, more badly than pedantry. But mathematics, properly directed, cannot fail"-Captain Nemo

"Numbers don't lie until they're cherry-picked statistics"-Forest Addy

"You've got to keep your ego in check!"-Paul Harrell

Offline OTmachine

  • Sharp Shooter
  • ****
  • Posts: 736
  • it'll shine when it shines
  • Real Name: Keith
Re: Screw Threads and the H-28 Handbook
« Reply #16 on: March 28, 2021, 11:40:27 PM »
Downloaded  :D
Thanks!
And to add to the resources-here's the link to download the Parker O-Ring Handbook:
(Should bring it up as a PDF viewer; you then download it from there)
http://www.parker.com/Literature/O-Ring%20Division%20Literature/ORD%205700.pdf
Jesse
Thanks!  Have that link as I do some business with them.
I just use AS-568 for American sizes, which I have downloaded, just like these folks do: https://www.globaloring.com/as568-size-chart/
  • USA, Central WI

Offline luge007

  • "Do the tan one Bob", "it's called desert sand mica", "What ever, just crash it!"
  • Plinker
  • **
  • Posts: 248
  • yes
  • Real Name: Matt
Re: Screw Threads and the H-28 Handbook
« Reply #17 on: June 06, 2021, 03:42:43 PM »
Wonderful resources guys, Thank You.
  • USA, RI, SK