• Jefferson State Airrifles
  • Air Gun Web - Expert Airgun Reviews
  • Hajimoto Productions
  • Airgun Angie - Backyard Shooting
  • Nielsen Specialty Ammo
  • Dynamic Air Rifles
  • FX Airguns
  • DonnyFL - When silence is a priority
  • Airgun Archery Fun
  • Pyramyd Air
  • Saber Tactical
  • New England Airgun
  • Umarex Airguns
  • Contact us
  • Utah Airguns
  • SEKHMET Airgun Accessories
  • Freedom Gun Targets
Jefferson State Airrifles
Air Gun Web - Expert Airgun Reviews
Hajimoto Productions
Airgun Angie - Backyard Shooting
Nielsen Specialty Ammo
Dynamic Air Rifles
FX Airguns
DonnyFL - When silence is a priority
Airgun Archery Fun
Pyramyd Air
Saber Tactical
New England Airgun
Umarex Airguns
Contact us
Utah Airguns
SEKHMET Airgun Accessories
Freedom Gun Targets


Author Topic: Crosman 125 Rawhide  (Read 167 times))

Offline murray p

  • Shooter
  • *
  • Posts: 10
  • yes
  • Real Name: Murray
Crosman 125 Rawhide
« on: February 22, 2021, 10:13:22 PM »
Need some help with this one, got new seals in and holds air but the gun will not cock, if anyone can help pls do
tks murray
  • Stayner,  Ontario, Canada

Offline Ronno6

  • Expert
  • *****
  • Posts: 1475
  • yes
  • Real Name: Ron
Re: Crosman 125 Rawhide
« Reply #1 on: February 22, 2021, 11:51:55 PM »
Need some help with this one, got new seals in and holds air but the gun will not cock, if anyone can help pls do
tks murray

I've been inside one....a real odd duck.
I remember a part being broken, but not much else....

Good luck!
  • United States of America,Stone County, Mississippi
You can lead a man to water, but you can't keep him from urinating in it.

Offline JKM6442

  • Shooter
  • *
  • Posts: 59
  • yes
  • Real Name: John
Re: Crosman 125 Rawhide
« Reply #2 on: February 23, 2021, 01:31:25 AM »
Need some help with this one, got new seals in and holds air but the gun will not cock, if anyone can help pls do
tks murray

I've been inside one....a real odd duck.
I remember a part being broken, but not much else....

Good luck!

Can you tell me how to disassemble a 125 Rawhide.  I'm not willing to tear into something unless I can study a schematic before hand and Crosman apparently never produced one.

Thanks - John
  • USA, Washington

Offline murray p

  • Shooter
  • *
  • Posts: 10
  • yes
  • Real Name: Murray
Re: Crosman 125 Rawhide
« Reply #3 on: February 23, 2021, 10:46:09 AM »
No pics anywhere but not hard, 2 screws take stock off pull cocking arm straight out and a screw at back of action take out and cover comes off, then a screw on top at back will seperate tube, then set screw for barrel comes out or just loose. The front barrel clamp comes off then a pin needs to be driven out near action and a screw near action, when clamp comes off barrel the bb feed spring and bits all just slide out and then just lifts up from receiver, the compression tube then pulls off pump arm and pump arm I never took completly out, hope that helps
  • Stayner,  Ontario, Canada

Offline murray p

  • Shooter
  • *
  • Posts: 10
  • yes
  • Real Name: Murray
Re: Crosman 125 Rawhide
« Reply #4 on: February 23, 2021, 10:50:27 AM »
Forgot to mention pump tube has knurling on end and is pressed into receiver so you  have to put a rod or screwdriver in linkage hole and then tap it to get tube out
  • Stayner,  Ontario, Canada

Offline JKM6442

  • Shooter
  • *
  • Posts: 59
  • yes
  • Real Name: John
Re: Crosman 125 Rawhide
« Reply #5 on: February 23, 2021, 02:49:28 PM »
Murray, thanks for the help, I appreciate it.

John
  • USA, Washington