Williams peep sight HW30S

[Stinger177]

Follow-up.

Here's a link to some alternative Williams apertures - https://www.midwayusa.com/s?searchTerm=williams%20sight%20apertures

If you have some $$$ and want to go a bit crazy (like me) check out this Gehman530. This is a totally adjustable and competition level sight, unfortunately they show that they are out of stock, but I have at least three of these on my various Weirauch - https://www.champchoice.com/mc-optics-sights/sight-apertures-irises/gehmann-iris-with-1-5x-magnification-530

You'll need the adapter for your FP-AG so you should talk to the people at Champions Choice to make sure it will mate.

And if you want to go extreme crazy (again, like me) you could go with this set-up which is a Gehman 530 coupled onto a Sinclair AOS (which has a Fresnel lense incorporated).

That last set-up is on one of my HW30S's (see below)



What front sight are you using? open blade, or globe with inserts?

Hope this helps.

 

[RKM]

Hey Dennis, where did you get the 1’ piece for the Williams FP-AG-TK. I’m running the little stock aperture and would like one of the larger 1’ numbers

[Stinger177]

Hey Robert

I posted the link in my previous response, but here it is again.

https://www.midwayusa.com/s?searchTerm=williams%20sight%20apertures

I prefer the 0.050 sight hole. I find that one perfect for a front globe sight on the HW30, but it also depends on the globe sight insert that you use. Make sure you get the correct threading to fit your base.

 

[MDriskill]

Thanks for that link! I didn't realize Williams had made that may different eye disks, I need to grab a few.

[Stinger177]

Hey Mike, long time.

Yeah, I've been going to Midway since you and I first started talking about this.

They also have parts to convert a screw adjust Williams to a target knob style. There are short and long screws on those, so if anyone wants to make that change, make sure of your screw length.

 

[hdrk1111]

I was running the Standard Williams, but Dennis hooked me up with Midway where i was able to purchase the 1" in three size eye holes, so I bought all three and have been running the 1".050. Thanks again for the information Dennis. At twenty yards the little plastic dinosaurs are dropping like flies and my offhand stuff is improving.
Bob

[Stinger177]

Happy to help!

I'm sure you'll find your correct solution, but even at 30 yds, the 0.50 have worked for me.