Author Topic: NEW Crosman 362 (Read 94979 times))

TKO22 · « **Reply #1260 on:** February 20, 2022, 11:58:24 PM »

I made another small batch of the V4.1 triggers, if a few others would like to try it. Email (preferred) or PM your mailing address.

Spacebus · « **Reply #1261 on:** February 21, 2022, 09:16:56 AM »

Quote from: Back_Roads on February 19, 2022, 07:08:43 PM

Quote from: Spacebus on February 19, 2022, 07:06:05 PM
Quote from: Wayne52 on February 19, 2022, 04:40:56 PM
Bob the mold that I cast the hunters with needed some tweeking and the results were better pellets that seem to be shooting real good. They were varying in weight quite a bit before and not so much anymore. I've cast thousands of the hunters from this mold and over time the pin bar's needed a little bending again to tighten things up. Those are the groups that I shot this morning. I might do a numbers target with it later maybe, I printed a bunch more different targets yesterday too.

I never thought to bend them. My .460 mold has pins that settle at different heights which is not great for slug consistency.

Here is a how too even https://noebulletmolds.com/smf/index.php?topic=199.0

Thanks, that does help.

TKO22 · « **Reply #1262 on:** February 21, 2022, 01:26:24 PM »

RE: V4.1 C362 triggers ... all given away.

Firewalker · « **Reply #1263 on:** February 21, 2022, 01:51:05 PM »

Quote from: TKO22 on February 21, 2022, 01:26:24 PM

RE: V4.1 C362 triggers ... all given away.

I'll get some pellets through mine and post a better review next week after the grandchildren have been extradited (yes, correct word use).

Charly45 · « **Reply #1264 on:** February 21, 2022, 07:27:43 PM »

Not thatits advised but 12 pumps with the 362 gave me 680fps with 18g vortex pellet..

Firewalker · « **Reply #1265 on:** February 21, 2022, 07:44:56 PM »

Quote from: Charly45 on February 21, 2022, 07:27:43 PM

Not thatits advised but 12 pumps with the 362 gave me 680fps with 18g vortex pellet..

Thats a smack-down!

Wayne52 · « **Reply #1266 on:** February 21, 2022, 11:36:01 PM »

I went back up in the attic at about 730PM and did some more shooting at a numbers target with the C362.

Bob Pratl · « **Reply #1267 on:** February 22, 2022, 06:04:01 AM »

Quote from: Wayne52 on February 21, 2022, 11:36:01 PM

I went back up in the attic at about 730PM and did some more shooting at a numbers target with the C362.

Wayne, nice shooting, that could have been 13 dead squirrels.

Wayne52 · « **Reply #1268 on:** February 22, 2022, 06:17:04 AM »

Quote from: Bob Pratl on February 22, 2022, 06:04:01 AM

Quote from: Wayne52 on February 21, 2022, 11:36:01 PM
I went back up in the attic at about 730PM and did some more shooting at a numbers target with the C362.

Wayne, nice shooting, that could have been 13 dead squirrels.

I did make it to the woods again yesterday however I didn't see any squirrels, I do have all of March to hunt the big one's yet.

Charly45 · « **Reply #1269 on:** February 22, 2022, 01:44:18 PM »

Added steel breach,extended prob and bigger breach port...only plus 10fps...so factory setup is pretty good...
660fps with 18g at 12 pumps...awsome

Charly45 · « **Reply #1270 on:** February 22, 2022, 05:57:48 PM »

3 shots 35yards...18 grain vortex pellet at 660fps...steel breech helped id say

wll2506 · « **Reply #1271 on:** February 22, 2022, 06:24:34 PM »

Quote from: Charly45 on February 22, 2022, 05:57:48 PM

3 shots 35yards...18 grain vortex pellet at 660fps...steel breech helped id say

Now that' what I'd call a group !!

wll

Charly45 · « **Reply #1272 on:** February 22, 2022, 07:27:47 PM »

Thanx bro,but its the gun not me lol...very happy...hope everones is as accurate

Spooner · « **Reply #1273 on:** February 23, 2022, 07:59:25 AM »

Wow!!! That is incredible shooting!

Wayne52 · « **Reply #1274 on:** February 23, 2022, 01:44:19 PM »

I did another numbers shoot early this morning.

mentolio · « **Reply #1275 on:** February 24, 2022, 10:37:29 PM »

Nice shootin’ Wayne, love those number targets! I was fartin’ around with mine today in the garage, just shooting Crosman Destroyers of all things. My original plan was to convert this gun to .177 (even bought a super-sweet 24” .177 barrel to do it), but the darned thing shoots so well I just can’t bring myself to do it! Granted it was only around 18-20’ to the target tonight, but even Destroyers touch holes with this gun, all stock and on iron sights! I’m stunned by this gun’s awesomeness.

Back_Roads · « **Reply #1276 on:** February 25, 2022, 08:28:16 AM »

I was able to shoot at 50 yards with mine the other day, had a soup can hung in a tree, 3 of 3 shots hit 2 in the same hole, dead center, just off enough to make the can swing, one I pulled the shot and tore another hole on the side of the can. I am now officially impressed

Wayne52 · « **Reply #1277 on:** February 25, 2022, 08:45:37 AM »

James that is impressive, was that on 8 pumps ?

bender ville · « **Reply #1278 on:** February 25, 2022, 09:30:34 AM »

with all the snow we have here my backyard range is only plowed out to thirty yards so thats what i have been shooting both my 362s one scoped one stock i understand the people that dont like pumps its ok but i love them and now a month into these new guns i have complete confidence in both of these guns i mean one inch bullseyes soup cans whatever you just cant miss only pumper i own where you hardly have to even do your part these things shoot dead on so clackity calck dont talk back lol.

Charly45 · « **Reply #1279 on:** February 25, 2022, 12:12:26 PM »

Yes ,they are great why i ordered another before they stop making them for some reason....also the daisy/winchester 1977xs very good too,im making 11.8ftls with 10.65 pellets....just a thought lol

Thank you to our advertisers!

NEW Crosman 362

Author Topic: NEW Crosman 362 (Read 94979 times))