Author Topic: NEW Crosman 362 (Read 94397 times))

avator · « **Reply #1320 on:** March 14, 2022, 03:28:22 PM »

When I was recovering from surgery and wanted to shoot a pumper I would lay it across my lap with the scope between my thighs. I found I could pump it easier that way. Used my upper body weight instead of my shoulders.

Bob Pratl · « **Reply #1321 on:** March 14, 2022, 04:57:46 PM »

Quote from: avator on March 14, 2022, 03:28:22 PM

When I was recovering from surgery and wanted to shoot a pumper I would lay it across my lap with the scope between my thighs. I found I could pump it easier that way. Used my upper body weight instead of my shoulders.

"Where there is will there is a way", so they say. It sounds like a doable way to pump it up
if you have shoulder problems.

Firewalker · « **Reply #1322 on:** March 14, 2022, 06:57:56 PM »

Quote from: Firewalker on March 14, 2022, 01:57:15 PM

I'm sorry it's come down to this but with a chronic injury to my left shoulder and a remodeled right shoulder, I can no longer 'pump' an airgun.

I have sold miss ~~941~~ 811and will be listing miss ~~811~~ 941 with the Baker ~~brass trigger~~ aluminum breech tonight in the classifieds.

I will keep the 880's for the grandkids but the 362's are WAY to tempting since I always grab one and shoot a pellet everytime I fill the boiler..

I did that one last time last night and was rewarded with a sleepless night.

Guess I'm AUDI

Firewalker · « **Reply #1323 on:** March 14, 2022, 10:02:05 PM »

The C362-941 is listed, I'll still read this thread with sadness in my heart.

Wayne52 · « **Reply #1324 on:** March 15, 2022, 12:11:04 AM »

I did another numbers shooting with mine this morning

dhd · « **Reply #1325 on:** March 15, 2022, 04:04:21 PM »

Quote from: Wayne52 on February 15, 2022, 09:15:36 AM

Bill I'm using UTG rings that came with my BugBuster, I've got the BugBuster 4-12X with the side parallax on mine right now, I did have the 3-9X like you ordered to begin with but considering how much I like the side parallax I put it on mainly for field use.

Wayne
I hope it's okay to reach back into this thread a ways to quote a post you made on 15 Feb 2021.
I see you have a Bug Buster with the side parallax and I was wondering if the
"UTG 80mm BUGBUSTER Side Wheel Add-on" really necessary to make adjustments ?
Does that side wheel get in the way of anything on your 362 ?
Bill

avator · « **Reply #1326 on:** March 15, 2022, 04:13:03 PM »

You don't have to use the side wheel. It is removable to expose a knob that looks like a turret cap.

Wayne52 · « **Reply #1327 on:** March 15, 2022, 05:17:50 PM »

I've never used a side wheel on anything but what I do mostly is hunt,

Charly45 · « **Reply #1328 on:** March 17, 2022, 09:35:55 PM »

Ok seems crazzy but my 362 loves 12 pumps...with 17.75 vortex...hole on hole...seems 660fps is better than 580 with 8 pumps.....

EdinGa · « **Reply #1329 on:** March 17, 2022, 09:41:15 PM »

Quote from: Charly45 on March 17, 2022, 09:35:55 PM

Ok seems crazzy but my 362 loves 12 pumps...with 17.75 vortex...hole on hole...seems 660fps is better than 580 with 8 pumps.....

Is it dumping all the air at 12? My .25 is holding air past 9 pumps.

Charly45 · « **Reply #1330 on:** March 19, 2022, 06:47:36 PM »

Yes sir,holding air just fine...

Struckat · « **Reply #1331 on:** March 19, 2022, 10:02:10 PM »

Don I think he meant is it still using all the air at 12, or is there still some in it after you shoot? Cock it again after the shot and pull the trigger. You should be able to tell if there was still some air in it.

My 362 arrived today! Shot it twice right out of the box at 10m, same hole, nice.
While installing the steel breech I polished the barrel with some JB.
Back together with a 2-7 Hawke shooting CPHP@ 670fps.

I like it.

Charly45 · « **Reply #1332 on:** March 23, 2022, 09:13:34 AM »

Yes im sorry dumping all the air...

Spacebus · « **Reply #1333 on:** March 23, 2022, 09:20:11 AM »

Seems production tolerances are all over the place on these c362's. I'm wishing I had waited or not gotten one at this point.

Wayne52 · « **Reply #1334 on:** March 23, 2022, 10:45:28 AM »

I'm still wondering if Crosman is making the barrels for these guns because I have noticed that all previous .22 barrels weren't as small as the one on the 362 I've been shooting. it seems to be pretty darned accurate shooting my cast NOE Hunters from it, I'd try the JSB 18.3 grain in it but I can't seem to find the tin that I still had a couple years ago, I need to start digging around to see if I can find them in all the different spots where they could be . . . . I guess that kind of happens when a person abandons store bought pellets when they make their own.

moose · « **Reply #1335 on:** March 25, 2022, 11:20:57 PM »

I only have 25 yrds max to shoot. I've never been able to shoot some heavier pellets until I got my 362. JSB Match Diabolo Exact Jumbo Monsters have been putting a BIG smile on my face !!! I have to sneak in a couple overtime hours to make sure I get my "FIX"

tennx · « **Reply #1336 on:** March 26, 2022, 09:53:55 AM »

U folks talk about the 362 barrel being “smaller” are we talking OD….because when I take a TKO off of a 1322 and put it on a 362 its a force fit….just my .02

Spooner · « **Reply #1337 on:** March 26, 2022, 10:06:33 AM »

Quote from: TennX on March 26, 2022, 09:53:55 AM

U folks talk about the 362 being “smaller” are we talking OD….because when I take a TKO off of a 1322 and put it on a 362 its a force fit….just my .02

Same here... it was a forced fit on the OD. I do know that this barrel is an in-house made barrel. The Crosman Engineer who posts here did tell me that in PM.

EdinGa · « **Reply #1338 on:** March 26, 2022, 02:20:02 PM »

There's nothing smaller about either of my 2 362 barrels. The OD is a little bigger and the bores are huge.

BerkshireHunter · « **Reply #1339 on:** March 26, 2022, 02:37:38 PM »

Just head about these new dogs this week. So of course I had to order one, they look interesting.

Thank you to our advertisers!

NEW Crosman 362

Author Topic: NEW Crosman 362 (Read 94397 times))