Hey knife, what size are you sizing those slugs down to?
I tried testing an NSA 38.5gr hollowpoint out of my 25cal Rainstorm last summer, wanted to see the expansion so I could show my son-in-law. I had three one-gallon jugs filled with water back to back at 30 yards, the Nielson went through all three destroying the jugs but the slug was nowhere to be found. I thought for sure one of them would have caught it. Great mod to your mold Mike, that should stop them cold.
This is an extension of the testing I have been doing for pcp pistols. worked so well, I decided to try it in a Hot .22 slug shooter. the FX Superior Heavy barreled Raptor. 35 grs, Modded HP of my own hand cast. I was looking for a fragmenting slug that would dump all of it's energy or most of it into vermin without continuing on to the next county. That, and I want them anchored fast. DRT so to speak. 50 yards, 930+ fps, (Listed over 1000 on another thread, but checked it and nada, just 930's). LOL Over 1000 would be even more impressive, but would cause me shot count Not worth it for me.Here are the results. I was able to test the Raptor modded cc1 as well I gave it the same treatment. It is going to be a very effective varmint round, however, it would ruin far too much meat for a hunting round so treated.I again shot a 1 gal. water jug, this time at 50 yards and it just simply blew up. Both the jug and the slug. LOL! Still deadly accurate! And to think this is with 2% tin. Not pure lead. Woo-Hoo!!!As you can see, the bullet acts much like a typical varming PB slug with the treatment. I think Scott got it right, The "Shredder". Can't use predator as it is already taken. 'Would have been nice Jason!Seems with such an explosive slug, down range worries will be lessened. A Good Thing. Seems that only the gas check base and lower driving band are still intact. Original weight was 35 grs. Base is now 17.2 grs. So 50% weight loss, an what remains is not going far as the bc is destroyed. Come on spring. Mikie needs some critters to test on. Mike/Knife