Where to buy the quick connector for a Discovery?

[Data]

Hello,
maybe someone can help me.
I own a Crosman Benjamin Discovery and I need the part the connects to the fill nipple of this gun.
I can't seem to find it anywhere.
It's the part that is at the end of the hose from the pump and connects to the nipple on the pump.

Thank you for your help.

[rsterne]

It is a female "Foster" 1/8" quick detach fitting.... They should be available through paintball shops and online stores....

Bob

[ezman604]

....or this one.
https://www.pyramydair.com/product/benjamin-asa-adapter-connects-bulk-co2-tanks-to-benjamin-dual-fuel?a=3639

Happy Shooting!!!!
Dave
 

[Data]

It is a female "Foster" 1/8" quick detach fitting.... They should be available through paintball shops and online stores....

Bob

Now I know the name of it, thank you.

....or this one.
https://www.pyramydair.com/product/benjamin-asa-adapter-connects-bulk-co2-tanks-to-benjamin-dual-fuel?a=3639

I've tried but haven't found an online store that sells these by themselves, I'll keep on looking.
If I can't find it anywhere by itself, I guess I could order this whole adapter and take it off of it.
Thank you

[bstaley]

talk to Joe....he'll hook you up.

http://www.airtanksforsale.com/

[Stefan]

or look here

http://www.bestfittings.co.uk/

[ezman604]

http://www.google.com/search?q=1%2F4%22+Foster+quick+connect&sourceid=ie7&rls=com.microsoft:en-us:IE-SearchBox&ie=&oe=#q=1%2F4%22+Foster+quick+connect&hl=en&rls=com.microsoft:en-us:IE-SearchBox&prmd=ivns&source=univ&tbm=shop&tbo=u&sa=X&ei=0zQ0TtfIF4i50AHhiZnqCw&ved=0CEAQrQQ&bav=on.2,or.r_gc.r_pw.&fp=fc7e810bf1b4e1ab&biw=1440&bih=713

[Data]

It is a female "Foster" 1/8" quick detach fitting....
Bob

http://www.google.com/search?q=1%2F4%22+Foster+quick+connect&sourceid=ie7&rls=com.microsoft:en-us:IE-SearchBox&ie=&oe=#q=1%2F4%22+Foster+quick+connect&hl=en&rls=com.microsoft:en-us:IE-SearchBox&prmd=ivns&source=univ&tbm=shop&tbo=u&sa=X&ei=0zQ0TtfIF4i50AHhiZnqCw&ved=0CEAQrQQ&bav=on.2,or.r_gc.r_pw.&fp=fc7e810bf1b4e1ab&biw=1440&bih=713

is it 1/4 or 1/8?
I have to call Joe back, he was bussy, I think he'll have what I need.
Thank you

[rsterne]

The thread size is 1/8" NPT.... The male insert is about 1/4" diameter....

Bob

[Data]

The thread size is 1/8" NPT.... The male insert is about 1/4" diameter....

Bob

OK, I think I understand now, I was locally locking for a quick disconnect that fits 1/8 male and was everywhere told they don't have something that small.
Since it doesn't matter what thread, size, male/female it is, I guess I should be looking for a 1/4 size quick disconnect that can hold 3000psi.
Is that right?

like this one: http://cgi.ebay.com/1-4-Foster-3-8-Barb-Industrial-Air-Quick-Coupler-/160611524188?pt=LH_DefaultDomain_0&hash=item2565315e5c

[amb5500c]

NO, its not 1/4". Its 1/8"NPT
Click on this link and scroll to the bottom to see what you want.
http://www.airtanksforsale.com/
Richard

[rsterne]

Regular quick disconnects you will find at most stores that are 1/4" NPT thread are designed for shop air compressors that run at ~100-150 psi.... They are NOT designed for HPA use.... ie DANGEROUS.... That would apply to the one you linked to.... its WAY bigger than the one for a Disco and not designed for high pressures.... Most air fittings go by the inside size of the pipe/hose, which is what is confusing you.... Pipe sizes and pipe thread also go by the "nominal" inside diameter of the pipe.... A fitting that is threaded 1/8" NPT (National Pipe Tapered) is actually nearly 3/8" OD but only just over 1/8" inside.... 

The fitting you need for a Disco is a Foster quick connect that will fit a 0.312" OD male connector (yes, I measured it this time, it's 5/16" OD) and rated at 3000 psi or more.... The number on the ones I have is a 12FS.... and they have 1/8" female NPT threads....

Bob

[Data]

The number on the ones I have is a 12FS.... and they have 1/8" female NPT threads....

Bob

Do you sell these? or could you sell me one?

[rsterne]

You can purchase them in sets (male and female) from JDS Airman.... http://www.jdsairman.com/MiscProducts.html .... $24 set....

or the Female only from Scopes & Ammo.com.... http://scopesandammo.com/storefront/product_info.php/18-npt-female-quick-disconnect-fitting-p-312 .... $11.99.... (it says 1/4" NPT but it isn't, it's 1/8" NPT and these are the ones I buy.... (no extras, sorry)....

this appears to be the same as well but at this price I'd be nervous about the quality (it says they are NOT RATED for HPA).... http://www.paintball-discounters.com/i/1702/quick-disconnect-female-half.htm .... $4.99.... This should be OK for CO2 but not HPA use....

Bob

[Data]

Thank you very much.
I found what I needed.