Author Topic: Testing new discovery (Read 51877 times - 2 votes)
)

KnifeMaker · « **Reply #20 on:** April 30, 2019, 10:41:11 PM »

No paycheck for me. Just want to see some variation avaliable to the AG world. Payment aplenty!

Now, I talked to the Fellow I needed to talk to. DonnyFL. It is in his court now.

I feel with Donny, it is in capable hands. Neil would have worked with it as well, but he isn't wanting to do anything commercial. He is enjoying slowing down. (So am I)!

x2

Mike

HunterWhite · « **Reply #21 on:** May 03, 2019, 11:24:57 AM »

Is there a product yet?

Hawkeye51 · « **Reply #22 on:** May 03, 2019, 11:32:32 PM »

Knife

We use diatomaceous earth in one of our coagulation tests for heart surgery. It triggers the extrinsic clotting cascade.

KnifeMaker · « **Reply #23 on:** May 04, 2019, 05:42:58 AM »

I can see how that would work!

rsterne · « **Reply #24 on:** May 04, 2019, 03:50:27 PM »

Michael.... I applaud your drive to get an improvement to market, without any compensation.... It is nice to see somebody else ready to do development and share with the airgunning community without profit being the motive.... We all will benefit in the long run.... To me, that is what it's all about....

Bob

Hobbyman2007 · « **Reply #25 on:** May 04, 2019, 05:00:39 PM »

Quote from: rsterne on May 04, 2019, 03:50:27 PM

Michael.... I applaud your drive to get an improvement to market, without any compensation.... It is nice to see somebody else ready to do development and share with the airgunning community without profit being the motive.... We all will benefit in the long run.... To me, that is what it's all about....

Bob

I completely agree Bob . Mike was nice enough to get me thinking of how it could be done . Once there’s some proof of concept I’m absolutely certain this will work out for a lot of shooters . Not only airgun specific as far as I can tell .

Dairyboy · « **Reply #26 on:** May 04, 2019, 05:09:51 PM »

Quote from: Hobbyman2007 on May 04, 2019, 05:00:39 PM

Quote from: rsterne on May 04, 2019, 03:50:27 PM
Michael.... I applaud your drive to get an improvement to market, without any compensation.... It is nice to see somebody else ready to do development and share with the airgunning community without profit being the motive.... We all will benefit in the long run.... To me, that is what it's all about....

Bob

I completely agree Bob . Mike was nice enough to get me thinking of how it could be done . Once there’s some proof of concept I’m absolutely certain this will work out for a lot of shooters . Not only airgun specific as far as I can tell .

Same here Denis and I think it's a very very cool idea. If it holds out to work on multiple guns I think it will be quite the discovery

KnifeMaker · « **Reply #27 on:** May 05, 2019, 01:46:33 AM »

I have sent the idea and how to do it to several people on the forum.

If you have tested it, please tell us the results, without saying yet what it is we are doing. I, we are looking forward to test results.

Mike/Knife

Tater · « **Reply #28 on:** May 05, 2019, 06:40:56 AM »

Quote from: KnifeMaker on May 05, 2019, 01:46:33 AM

I have sent the idea and how to do it to several people on the forum.

If you have tested it, please tell us the results, without saying yet what it is we are doing. I, we are looking forward to test results.

Mike/Knife

Hobbyman2007 · « **Reply #29 on:** May 05, 2019, 08:54:37 AM »

Here are some before and after pics . That’s proof enough for me to say that Mike is definitely on to something .they were shot at 70 yards . I have more testing to do , but once I’m done it should improve groups drastically . I should also mention that I was shooting the 225-39-FNGC at just over 900fps with my K550. I was contemplating replacing the barrel on this rifle because I just couldn’t get it shooting like I wanted . Now the barrel is definitely staying .

bear air · « **Reply #30 on:** May 05, 2019, 10:59:39 AM »

Following to hear the rest of the story.

StockClassDD68 · « **Reply #31 on:** May 05, 2019, 11:00:12 AM »

Quote from: bear air on May 05, 2019, 10:59:39 AM

Following to hear the rest of the story.

Same

Back_Roads · « **Reply #32 on:** May 05, 2019, 11:13:01 AM »

I had no idea Paul Harvey started this post

JungleShooter · « **Reply #33 on:** May 05, 2019, 11:27:07 AM »

Knife,
the tension in the chatroom where your discovery is going to be revealed is so thick, you could almost cut it with a knife.

We're all with you, Michael. How exciting!!

Matthias

Insanity · « **Reply #34 on:** May 05, 2019, 11:37:14 AM »

Very interested in this, Id like to shoot slugs through something at some point.

Hobbyman2007 · « **Reply #35 on:** May 05, 2019, 11:41:52 AM »

One more thing to add . From the limited testing I’ve done , shooting nearly 100 bullets . Higher powered air guns with long dwell time will most likely improve the most . I don’t think this will apply to the 12FPE crowd . Next up is a .257 cal at 140 Fpe , it does shoot some bullets rather well , the test is to see if the others will group any better. It will be a few days before I can do more testing as work has me booked for the next few days . The nerve of them interfering with such a high priority R&D project .

HunterWhite · « **Reply #36 on:** May 05, 2019, 03:14:25 PM »

I just can't take the suspense, I've started a thread to guess the trick.

screwwork · « **Reply #37 on:** May 05, 2019, 04:22:41 PM »

I bet Mike used scorpion poison a slug lube.

PeterL · « **Reply #38 on:** May 05, 2019, 06:54:02 PM »

Quote from: KnifeMaker on May 05, 2019, 01:46:33 AM

I have sent the idea and how to do it to several people on the forum.

If you have tested it, please tell us the results, without saying yet what it is we are doing. I, we are looking forward to test results.

Mike/Knife

Now you got me curious Mike. Give me a call if you need another tester. Great find on your part.

Peter

Joekrooz · « **Reply #39 on:** May 05, 2019, 09:35:57 PM »

Almost didn’t read this post thinking you were testing a new Benjamin Discovery, glad I did! Looking forward to the big reveal.

Thank you to our advertisers!

Testing new discovery

Author Topic: Testing new discovery (Read 51877 times - 2 votes) )

Author Topic: Testing new discovery (Read 51877 times - 2 votes)
)