Altaros M24 Airgun .22 Prototype 60 FPE!

[Altaros]

To ezman604:
Thank you for answer here and in PM.
So far I have found a solution to log in via the newly created anonymous window. Delete  cookies will probably help only for a moment.  There seems to be a problem with IP addresses here from the Czech Republic, which are considered spam. From a user's perspective, however, a bann report is displayed even though the account is not affected.  Access will be a bit less comfortable now, but better than looking every time on new computers :-).

Visible hits for a given snow video are at 9:48, 11:0. Unfortunately, it is necessary carefully track the target , because at this distance, the residual energy is already very small for this caliber and the influence on the target is small.

Since I design, developed and manufactured that M24 airgun and bullet produced, so of course I have all the information. However, we can not publish them, since it is a matter of a few technologies that will be patented first and of course that tehcnologies can not be publicly known before patenting. 

It was originally not planned to show the rifle at all, only long distance video. But since people did not believe it was an airgun, I made this video where it is visible in action. Obviously I should wait until we're ready to offer the rifle to our customers.

I will always try to add the information that will be published without any problems with the above.

[Pellgunfun]

Watching that long trigger pull and break drives me crazy. Take up some of that first stage at least guys!

Call me crazy, but for me I like a bit of creep and pull.  It lets me know that's I'm applying the right amount of force to get it moving, then I just maintain that force without adding more and just wait for the magic to happen.  If the pull tends to be to long for my liking I usually will take up half of the pull then stop and start again from there.

[Altaros]

Regarding the trigger, it's not the trigger at all
It's a piece of duralumin plate that I used in the initial experiments 8 years ago and somehow I got used to it ;-).  In the serial version it will be a regular trigger.

That first stretching is only long because I do not have a screw for the settings. For my purposes it does not matter yet and it will finish up in the next versions. The overall resistance of the trigger is acoustically around 150g, it is set very soft, and the initial stretching has a lesser resistance.

[Lani52]

My Haley 257 Scandulous shot better at 615 yards, tethered and using cast bullets. And Rifle 50 put my shot way into 2nd place

Google my video. Haley 615 yard shot 12 oz cola can

Roachcreek

[Pellgunfun]

Lani, the video is old and fuzzy.  It's shot in 480p.  Now it's time to go back and reshoot the video in 1080p or better. 

[Lani52]

my wife shot that video with a 2008 vintage handicam I do wish I had the skills to redo it, but I do not.

I must say the Mel 24 is a much cooler looking rifle that my exHaley.

Roachcreek

[crosman999]

Wow for that much power it sure does sound quiet, how are you getting no recoil? 

[Zeddymon]

My Haley 257 Scandulous shot better at 615 yards, tethered and using cast bullets. And Rifle 50 put my shot way into 2nd place

Google my video. Haley 615 yard shot 12 oz cola can

Roachcreek

yeah!! don't try to disapear!!!! again!

[D-RIG]

Is this gun shooting the 5.52mm or the 5.55mm
I'd be very interested to know . Thanks , Dale

[Nomadic Pirate]

Still,.....where is the air reservoir ?

[YEMX]

Still,.....where is the air reservoir ?

x2

[QVTom]

Really?  Starting off a video calling other manufacturers and their customers  thieves......  Got an IP problem; get a lawyer.

[Pellgunfun]

I didn't see that on the video.  I must have blinked or something.

[QVTom]

I didn't see that on the video.  I must have blinked or something.

The introduction when he establishes his bonafides.

[Pellgunfun]

I still didn't hear him call anyone a thief, only that he said his reg designs are copied by other reg makers.  Is that what you mean?  The next question is, was his statement true, that others have copied his design??

[QVTom]

I still didn't hear him call anyone a thief, only that he said his reg designs are copied by other reg makers.  Is that what you mean?  The next question is, was his statement true, that others have copied his design??

Exact words were you are stealing our technology.  As for first, I have no idea other than regulators designs go back more than 100 years.

[mackeral5]

I still didn't hear him call anyone a thief, only that he said his reg designs are copied by other reg makers.  Is that what you mean?  The next question is, was his statement true, that others have copied his design??

Exact words were you are stealing our technology.  As for first, I have no idea other than regulators designs go back more than 100 years.

Often times when English is a second language, the words chosen may seem more harsh than the speaker's intent.....perhaps that is the case here. 

[Pellgunfun]

Sounds to me like he said, "so if you buy other regulators you "still" use our technology".

I didn't get the impression he was accusing anyone of anything, but I can see now where one could get the impression that he was "implying" it.

"Still" and "Steal"......  Man that's tricky....

[jorgo]

That looks like a great pcp rifle i hope it comes to the market

[Nomadic Pirate]

That looks like a great pcp rifle i hope it comes to the market

But ,....how does it look like a great PCP ?

Doesn't even look like a PCP,....also that video din't really show anything.