Author Topic: Gamo Urban Completed Upgrade with Shroud (Read 5428 times))

MB · « **on:** December 29, 2018, 01:56:51 PM »

Gamo Urban .22
Slightly shortened Barrel, Baffle inserts, Custom Carbon Fiber Shroud...
Alteros Regulator
Re Crowned Barrel

Custom antis slip painted stock

She is now really quiet, was toying with putting a LDC / Silencer on it, prefer the shroud

mackeral5 · « **Reply #1 on:** December 29, 2018, 01:58:38 PM »

the shroud looks great. Looks like a totally different gun that what Gamo delivered.

MB · « **Reply #2 on:** December 29, 2018, 02:00:59 PM »

Thanks Mike, just feels better with the new additions

Tucobenedicto · « **Reply #3 on:** December 29, 2018, 03:08:25 PM »

Great work! It looks very good.

SoCalZac · « **Reply #4 on:** December 29, 2018, 04:07:03 PM »

Looks great without the pickle, good job!

Nomadic Pirate · « **Reply #5 on:** December 29, 2018, 04:18:24 PM »

Urban looks great with a shroud.

Toddspeed · « **Reply #6 on:** December 29, 2018, 09:59:46 PM »

The shroud does look great, in fact I have a piece of carbon fiber I bought so I could do the same thing but I’m hesitating because I’ve seen several posts about guys putting shrouds on their Urban and then loosing accuracy. Have you had any loss of accuracy since adding the shroud?

MB · « **Reply #7 on:** December 29, 2018, 10:06:36 PM »

Just shot it out at 35 yards, just as accurate...

MB · « **Reply #8 on:** December 29, 2018, 10:08:18 PM »

Will try more groups tomorrow or Monday JSB 14.35 H&N FTT 14.66, usually good out to 50 yards, the big difference is how subdued and quiet the shots are...Will report back

MB · « **Reply #9 on:** January 06, 2019, 11:00:18 PM »

Quote from: Toddspeed on December 29, 2018, 09:59:46 PM

The shroud does look great, in fact I have a piece of carbon fiber I bought so I could do the same thing but I’m hesitating because I’ve seen several posts about guys putting shrouds on their Urban and then loosing accuracy. Have you had any loss of accuracy since adding the shroud?

40 yards 5 shot and 10 shot group, accurate as ever...Shroud has IMHO made the gun look and shoot better

Toddspeed · « **Reply #10 on:** January 06, 2019, 11:19:38 PM »

Looks good, thanks for posting. Where did you get the baffles and other internal parts for the shroud?

hoteltwofive · « **Reply #11 on:** January 07, 2019, 07:04:38 PM »

Very sharp! This is how all of the factory guns should look.

MB · « **Reply #12 on:** January 07, 2019, 10:30:12 PM »

Quote from: Toddspeed on January 06, 2019, 11:19:38 PM

Looks good, thanks for posting. Where did you get the baffles and other internal parts for the shroud?

Done in house

1/2 UNF adaptor over barrel cut down end of barrel 1/2 inch to allow good fit and add this baffle system to it:

https://www.pyramydair.com/product/crosman-np214-001-trail-baffle?a=7784 – Note the end fits perfectly into the Carbo Fiber tube and seals the end, the inner section has an Oring groove, you need to put one on and drill some holes in the top of the channels made for air to allow the air to flow backwards into the shroud as the 1/2 unf adaptor blocks these natural holes…

Carbon fiber tube:

End cap bored out to fit over barrel close to breech, this is bored out to fit barrel OD and rests up against a smaller 16mm (I believe) ID carbon fiber sleeve that fits up against the block, this holds the shroud in position, of course I have four drilled holes towards rear in shroud to allow air to come backwards

Hope this helps

K.O. · « **Reply #13 on:** January 08, 2019, 02:15:27 AM »

it is frreakin awsomesauce...

seems custom made...

ya Know what is gonna happen with my Buccaneer's 1/2 unf muzzle..?

is that a 2X meaning 2 carbon fiber tubes..?

K.O. · « **Reply #14 on:** January 08, 2019, 02:43:32 AM »

oops read further it is 2 pieces cool my Urban will be happy also...

Airnut · « **Reply #15 on:** January 08, 2019, 05:08:53 AM »

Nice job Mike!!

MB · « **Reply #16 on:** January 08, 2019, 12:53:44 PM »

Quote from: K.O. on January 08, 2019, 02:15:27 AM

it is frreakin awsomesauce...

seems custom made...

ya Know what is gonna happen with my Buccaneer's 1/2 unf muzzle..?

is that a 2X meaning 2 carbon fiber tubes..?

Thanks Guys - Single tube for shroud, small section of CF tube to fit over barrel to allow shroud to tension against breech block...

See below for removing pickle and making barrel end one continuous diameter :https://www.gatewaytoairguns.org/GTA/index.php?topic=147302.msg1499386#msg1499386

This allowed me to slip on silencer adaptor...

MB · « **Reply #17 on:** January 08, 2019, 12:54:05 PM »

https://www.gatewaytoairguns.org/GTA/index.php?topic=147302.msg1499386#msg1499386

toddbrat · « **Reply #18 on:** January 08, 2019, 01:06:08 PM »

Yours looks much better than mine. I used PVC to make an inner brace and "custom air stripper" along with the shroud and baffles from the BNM kit I bought for my Maximus.

For anyone looking to remove the pickle, this is what you should end up with once all the plastic is removed. It is a PITA and will add the link later to the thread I made that shows the removal process. I ended up using a diamond cutting wheel on a Dremel for most of it.

GreenDragon · « **Reply #19 on:** January 08, 2019, 01:06:26 PM »

Awesome job! I've been wanting to do something similar as I hate that pickle. Where did you get your 1/2 UNF adaptor?

Thank you to our advertisers!

Gamo Urban Completed Upgrade with Shroud

Author Topic: Gamo Urban Completed Upgrade with Shroud (Read 5428 times))

Nomadic Pirate