AR766MF stock making for Dummies

[Tack Driver 10]

Started making this AR style stock for a phase 1 766.
The receiver is blank with no stenciling or stampings except the s/n.
This gun will incorporate MFT (Magnum Force Technology).
Poplar wood stained ebony with a seal coat.
The stock so far:

[TooJung2Die]

That looks great. Do you have a photo of the part of the stock where it goes into the receiver? I'd like to see some detail on how it is attached.
Jon

[Tack Driver 10]

The connection is made from 1" square brass tube.
Similar to this one made for a 2100 and a prototype aluminum version for a 766.
The brackets seem to be different for each phase of the gun.
Heavy bolts anchored deep hold it together.

[BoostCreep]

nice work

[Tack Driver 10]

Finished with bracket detail:

Need to make the fore arm next.

[TooJung2Die]

That looks great. I like it. Is that a Tru-Oil finish?

[Tack Driver 10]

That looks great. I like it. Is that a Tru-Oil finish?

The finish:
Watco Danish oil, let dry 72 hours.
3 coats wipe on poly, light sanding.
2 light spray coats satin Minwax Helmsman Spar Urethane.

I make the wipe on poly with a 10 second spray of the Spar Urethane thinned 50% in a cup.
Apply it with folded cheesecloth.

Have not tried Tru-Oil.