Author Topic: QB-89 "bullpups" at Best Airgun soon (Read 30487 times))

milkman · « **Reply #20 on:** July 19, 2011, 09:43:34 PM »

I gotta quit hanging around this site, it could be as expensive as hanging around on the chainsaw site.

MichaelM · « **Reply #21 on:** July 20, 2011, 01:21:10 AM »

ok me thinks I may have to call Mike tomorrow and order one... for 30 bucks it will sure be hard to beat the cool factor lol

gene_sc · « **Reply #22 on:** July 20, 2011, 01:31:28 AM »

Looks very interesting. I did a QB 57 project once and this looks to be allot of fun. Would love to disect this one and see what I can make out of it...

fperez0209 · « **Reply #23 on:** July 20, 2011, 02:13:13 AM »

Gene,I can just see one with one of your shrouds.Give it that bad ^&* assault rifle look.

cole5169 · « **Reply #24 on:** July 21, 2011, 11:26:54 AM »

Heads up.
Mike says they're going quick, fellas.

MichaelM · « **Reply #25 on:** July 21, 2011, 06:19:29 PM »

snagged one today

mikeiniowa · « **Reply #26 on:** July 21, 2011, 10:28:23 PM »

ran out of the first 20 today, have more on order and should be here in a week or so. I have been doing random testing and they seem to shoot nice, for best results a recrown may be in order. They do take awhile to settle in as they are still oily inside which is a good thing. Velocity is slightly below factory specs with normal pellets but I think will go up with use as the seal wears in...

Dick Tracey · « **Reply #27 on:** July 22, 2011, 08:15:35 PM »

I just got my QB89 today.

$:-\$ . Man that is the heaviest 7.7 lbs I ever lifted. The jury is still out on this. I will take Best Airs advice and tear it down and clean and relube it before I try to shoot it. It's so ugly it's cute.

MichaelM · « **Reply #28 on:** July 22, 2011, 08:37:50 PM »

Quote from: Dick Tracey on July 22, 2011, 08:15:35 PM

I just got my QB89 today. $:-\$ . Man that is the heaviest 7.7 lbs I ever lifted. The jury is still out on this. I will take Best Airs advice and tear it down and clean and relube it before I try to shoot it. It's so ugly it's cute.

yea I bought one for the sheer oddity of it... when I get it in I will tear it down and do a full tune.... custom guides and all.... if it shoots it shoots if not it will still be a fun little conversation peice

and rare oddity

MichaelM · « **Reply #29 on:** July 26, 2011, 10:34:27 PM »

Got my qb-89 in today

love it.... and if you cant hit what your aining at you can beat them to death with it.... MAN thats a heavy little guun... but it actualy balances out real nice.... wonder how long it will take the average person to realize it has an extendable butplate on it...(err well I guess I gave that secret away...)

trigger is definatly a direct sear setup LOL takes about 15 pounds to get it to break.... some cosmetic dings but for basicaly a "factory find" peice of hardware thats been sitting in a warehouse lost for who knows how long its actualy in really good shape LOL... honestly either I am deaf or its not nearly as loud as I thought it would be right up next to my face like that and it doesnt have much felt recoil either...

now as soon as I get a couple customer jobs off my bench I will have to tear this and my new (old) all metal IZH-61 down and do some tuning.....

thanks mike!! this thing is going to be a great little tin can killer!!

tkerrigan · « **Reply #30 on:** July 26, 2011, 11:49:19 PM »

Hey, reports on the teardowns, I just had 4 show up today. I've never been into any Chinese gun and could use some help. It doesn't look too bad in the manual.

Tom

fperez0209 · « **Reply #31 on:** July 27, 2011, 02:41:27 AM »

Yes post some pics on the teardown,I can't figure out how to take it apart.I've taken apart and tuned a lot of springers,but just can't figure how to remove it from the stock

grumpy · « **Reply #32 on:** July 27, 2011, 05:00:32 AM »

Could one of you guys measure one. I need to know if its 30" or longer butt to crown. Thanks

Dave

mikeiniowa · « **Reply #33 on:** July 27, 2011, 10:30:24 AM »

to tear down....remove sight on top, replace screw in rear sight mount and pull up to remove base (clips over barrel), remove set screw under barrel cover and unscrew cover, use tool provided to remove hold down on front of barrel (holds trigger group on rifle if I remember right) remove pin for trigger, trigger group should come off, remove screw in bottom of the butt of the stock. remove rear butt pad and mount, It's been awhile but you should now be able to push the action out the back of the stock

grumpy · « **Reply #34 on:** July 27, 2011, 01:01:04 PM »

I tried calling Best air today but got no answer. Is there a better time to call ? I gotta know if QB-89 is 30" or over to meet Michigan law.

Dave

mikeiniowa · « **Reply #35 on:** July 27, 2011, 03:30:28 PM »

27 inches with butt extended........

grumpy · « **Reply #36 on:** July 27, 2011, 05:05:48 PM »

Thanks sir !

z28rod · « **Reply #37 on:** July 30, 2011, 11:02:19 AM »

Do these come in .22 cal.

Dick Tracey · « **Reply #38 on:** July 30, 2011, 06:07:27 PM »

Yes they do come in .22. In fact the box says .177/.22

grumpy · « **Reply #39 on:** July 30, 2011, 06:32:14 PM »

Are they available again yet ?

Thank you to our advertisers!

QB-89 "bullpups" at Best Airgun soon

Author Topic: QB-89 "bullpups" at Best Airgun soon (Read 30487 times))

milkman

cole5169