Crosman 2240 Breech Riser



Author Topic: Crosman 2240 Breech Riser  (Read 131 times))

Offline Socaltrail

  • Shooter
  • *
  • Posts: 14
  • yes
  • Real Name: Shawn
Crosman 2240 Breech Riser
« on: September 27, 2018, 01:29:57 AM »
Quick question for you guys in the riser you offer for the Crosman 2240. Are there any additional parts needed to bolt it to a long steel Crosman factory breech? Any seals or tubes for the transfer port?  Thank you!
  • USA, California

Online Gipper

  • Marksman
  • ***
  • Posts: 377
  • Real Name: Brian
Re: Crosman 2240 Breech Riser
« Reply #1 on: September 27, 2018, 08:11:57 AM »
You will need a new transfer port.  Mounting screws and extended hammer pin are provided in the kit.  Good old ice maker tubing is what I used.

Brian
  • Belleville, IL.
HW50S .177 - Rob Hawkins tuned
HW30s .177 - Vortek Kit
T01 Diana 34 .22 - Vortek Kit
Custom Crosman 1377 Carbine
Crosman Custom Shop 2240kt .177 - Boss Valve and Bulk fill
Bam B50 .177 - Mike Mellick tuned
AR2079 .177 - HPA
QB78D with target sights - 12gr carts.
AR2078  CARBINE - Bulk Fill
Bottle Fed Disco - .177
BSA R10 MKII - .177

Offline Socaltrail

  • Shooter
  • *
  • Posts: 14
  • yes
  • Real Name: Shawn
Re: Crosman 2240 Breech Riser
« Reply #2 on: September 28, 2018, 05:29:59 PM »
Perfect, thank you sir!
  • USA, California

Offline Socaltrail

  • Shooter
  • *
  • Posts: 14
  • yes
  • Real Name: Shawn
Re: Crosman 2240 Breech Riser
« Reply #3 on: October 06, 2018, 06:22:55 PM »
What is the largest diameter shroud I can use with this riser??? I have some 1.1 OD carbon fiber tubing I was looking to use
  • USA, California

GTA - What's been your success with air gun target practice?