What airgun related did you do today?

[Hoosier Daddy]

Yes they can carry leprosy....

This is a popular handicraft in Texas.

Thank God all we have to worry about are Jackalopes

[Mike71]

I'm hoping for the monkeys in south Florida to move up this way. Oh what fun we red necks and country boys could have with that..

Pellet gun related... the carpenter bees have started, got one with my 1322 at 3 pumps, got'm but when it hits the tin roof, then a 2×4 it comes back with a bit of force still.

[Blowpipe Sam]

I need to make up some rice loads for the .25 Hatsans.  Gotta find some paper drinking straws of the right diameter..  I prefer rice to salt for carpenter bees.

I moved all my ammo cans out to the shed.  Now all my air gun ammo is in one spot.  I went through all the boxes and segregated out air gun specific items to be organized at the air gun bench.

[Back_Roads]

 I mounted some back up 940 illimunation to my 250z setup.
That reminds me, chance of northern lights tonight if it clears up and I awake I will point this rig at the sky 

[2A Georgia]

Pirated some of memsahib's glitter pink nail polish for the front shark fin on the pp800r until the fiber comes from China

[bantam5s]

I started on the project to accurize one of my Daisy no.177 " Target special " bb pistols.
I'm starting a thread about it in the BB gun gate.

[avator]

I moved 3 of my compressors to one bench in the Red Shed yesterday... "Compressor Central". 2 of them require a water bucket for cooling so today I will locate the 2 5 gallon buckets to a lower shelf and plumb them to the compressors. I need to make a run to the local hardware to get some tubing.
I'll post up some pics when it's all done.

[Zsigmund]

 I thought about tearing into a springer last night (D34), but after a nice steak dinner the cat sat on me and made me watch a movie and doze off.
"dang" cats.

 Oh, I shot it a few times (rifle not cat) and shopped for some seals too.

[splitbeing]

Waiting for a couple packages today and tomorrow (hopefully).  Those discount reactive diana targets that were on sale and a gun trade.

[avator]

 I thought about tearing into a springer last night (D34), but after a nice steak dinner the cat sat on me and made me watch a movie and doze off.
"dang" cats.

 Oh, I shot it a few times (rifle not cat) and shopped for some seals too.

Oh boy... pet cats are one thing but don't you think pet seals might be a bit too much?   

[Zsigmund]

 I thought about tearing into a springer last night (D34), but after a nice steak dinner the cat sat on me and made me watch a movie and doze off.
"dang" cats.

 Oh, I shot it a few times (rifle not cat) and shopped for some seals too.

Oh boy... pet cats are one thing but don't you think pet seals might be a bit too much?   

 Bill,

 LOL, you got me on that one!

You are absolutely correct, I don't even have a tank large enough for a seal anyway.. Hmmm, opportunity for more shopping?

[avator]

Pic of "Compressor Central".
Decided to run the YH and the Vevor from the same water source. They never run at the same time and this will save space. I still have to go get more tubing to set the bucket under.

[bReTt]

I have gotten bored with static distance shooting for a couple of years now.  About a year ago I started shooting drills with CO2 versions of some “real” guns that I have to practice and build my skills for a different type of shooting.  Now that spring is here and the temps are starting to get warmer we will be moving into CO2 shooting weather again.  I’m really looking forward to setting up some courses and getting outside to play with my BB guns!  🔫

[bReTt]

Pic of "Compressor Central".
Decided to run the YH and the Vevor from the same water source. They never run at the same time and this will save space. I still have to go get more tubing to set the bucket under.

I used to be a PCP hand pumper guy.  Since I bought that little GX compressor I haven’t hardly touched my hand pump except to move it out of the way.  Ha ha!  I’ve been spoiled.  I fill straight to the gun.

[Matchstickshooter]

 I have two PCP's running on co2...   lol

 and that's the only way to make one of them (the Wildfire) work..

[Mike71]

Still need to put a red dot on it and make my raised cheek riser, but I finished my 362.. I'll chronograph it tomorrow when the light is right.
Pinned it and final assembly.

[avator]

Already poured 2 batches of the NOE 251 27 RF pellets this morning. The first batch of around 100 have been tumbled, weighed/culled, sized the tumbled again to polish. The 2nd batch is in the first tumble.
After breakfast I'll weigh/cull and size that batch and finish tumble them while I pour another batch.
The plan is to run 3 or so more batches today. Start to finish a batch take 30 to 40 minutes. If I get into the right routine I can be pouring while tumbling and sorting/sizing while the pot comes back to temp after adding the sprues back in. Finish tumbling while pouring the next batch.
I can get alot more done in a session now that I lowered the bench so I can sit instead of standing.

[buellm2]

I'm gathering stuff to sell at an upcoming gun show.   I'll bring a couple AGs that I don't shoot much.   Selling at gun shows used to be fun.   Nowadays it's less fun but not quite work.

[avator]

I'm gathering stuff to sell at an upcoming gun show.   I'll bring a couple AGs that I don't shoot much.   Selling at gun shows used to be fun.   Nowadays it's less fun but not quite work.

It has to be better than packing and shipping, not to mention the cost of doing so.

[bReTt]

I did this a few days ago but I set up my duty belt that doubles as my “At home airgun belt” for running and gunning in the back yard with CO2 and BBs.  I just found out that the M17 “magazines” are larger than the real deal magazines and don’t fit in the pistol mag pouches.  😬🤦🏻‍♂️ Everything else is a direct swap and works perfectly.