What airgun related did you do today?

[hogdog4953]

I put a red dot on the ratcatcher and re-sighted it in. Tested out my new (homebrew) target trap while I was at it. Scott that crazy is the boxer part, we had a boxer many years ago and that dog was nuts!! Great family pooch but she never ever had an off switch. Our american bulldogs at least have a switch..........give them a femur bone.

[RobertMcC]

I put a red dot on the ratcatcher and re-sighted it in. Tested out my new (homebrew) target trap while I was at it. Scott that crazy is the boxer part, we had a boxer many years ago and that dog was nuts!! Great family pooch but she never ever had an off switch. Our american bulldogs at least have a switch..........give them a femur bone.

Or a blanket.

Me I'm thinking of picking up another P17, new scope mount, and a diana chaser.

[Sfttailrdr46]

Playing with the Air Speed again today polished all the moving parts then reassembled and shot 6 magazines testing for accuracy . Then went out in the backyard with the pups Dudley the Bishon-Tshitzu mix and Meathead the old English bulldog. at 7 months old he is the absolute laziest dog I have ever owned. after 10 or 15 minutes of chasing Dudley around the yard he will look for a sunny spot to lay down in ( pure LAZY) 

[Insanity]

Bought a Beeman p17 today.

[Yng@hrt]

Set up the shooting range for a pregame fun shoot with the family, including a blast the can to the finish line as per Hoosier D. Of course I had to weigh down the opponent's can.

[Rick67]

I just looked at them and made sure they are safe and sound----you know, like a dad checking on his kids come bedtime   

[Back_Roads]

 I gave the Hatsan Striker .25 it's first taste of blood  Had a live trapped possum, took it behind the shop, went for the gun, noticed on my way back I had a good shot from 15 yards, so I took the shot, followed by not a meat smack sound but more of a bone crushing crack, resulting in a DRT.

[Wayne52]

I shot a good sized fox squirrel about 1:30 PM today at about 40 yards with my Airmax Dominator which Diana calls the Outlaw, I was using cast 23 grain NOE Magnum Hunters that I cast.

[maraudinglizard]

Getting ready to hunt this morning, loading up everything and make the 2 hour drive. Looking forward to a day in the woods with a new hunting buddy as well.

[Flatcar1]

Made and installed white line spacers "Bling" for both my German ladies, R9 and R7 Beemans. I wish I could round up a couple of the grip caps, that way I could make them look as good as these models did in the "old" days with caps and butt pads with black and white spacers. That makes a beautiful piece of wood really stand out.

[Sfttailrdr46]

  Spent some tinker time with my two week old Evanix Air Speed .25 semi auto rifle. Thanks Travis & Matt for giving me the heads up on the fix and allowing me to be one of the first to implement it and the initial testing. More power and improved accuracy is not a bad thing

[triggertreat]

Tweaked the tuning on the Slayer a little bit more.

[Hoosier Daddy]

 I dug out and cleaned up an old piece of Computer Desk I have had stored in the garage forever... and started on a charging station in the "Man Cave".
 I cut a hole in the center of the 5g bucket lid for water lines and pump power cord. Thinking it will get re-freezable ice packs I also already have.
It has two "L" brackets on the side I plan on using for a black filter I am about to order once the Chinese New Year is over.

[stevemag]

bought a 13/3000 tank and the cheap hand pump for my ham850 and slipped a little farther into the dark side...

[19Sheridan57]

It was time to cycle my oldest Sheridans, so I shot all of those a few times, each.

[avator]

Took a couple off hand shots with my Gen I FD-PCP .22 on my lunch break. Still one of my favorite guns. It's had the same air in it for many months.

[maraudinglizard]

bought a 13/3000 tank and the cheap hand pump for my ham850 and slipped a little farther into the dark side...

That's what happens when you are away from the GTA to long.

[UlteriorModem]

Rebuilt the Maurader again last night. It just did not feel right and was random as could be.

I 'think' I found the issue, the exit hole on the moderator showed some signs of clipping so I drilled it out a little and the accuracy and consistency went up. Still did not feel right on the cocking.

So I tore it down cleaned up the moly that was in there... what a mess... and turned the gas spring around so the larger body is in the piston so that the piston does not have to slide down over it. Feels a lot better less gritty and quite smooth. Discharges nicely.

Havent done any target testing yet but crossing my fingers. That gun had turned into a wreck!

[avator]

So you have a gas ram driving your hammer?

[UlteriorModem]

So you have a gas ram driving your hammer?

That was for me? I dont understand, the Mayhem is a break barrel. The gas spring goes into the piston. The gas spring can actually be installed in two different orientations and still work.