Marauder Gen 2 .25 Stock Valve Question



Author Topic: Marauder Gen 2 .25 Stock Valve Question  (Read 177 times))

Offline brisner

  • Shooter
  • *
  • Posts: 29
  • yes
  • Real Name: Bob
Marauder Gen 2 .25 Stock Valve Question
« on: January 29, 2019, 10:21:07 PM »
I took the stock valve out of my Marauder Gen 2 .25 and the poppet stem seems to be stuck and will not come out. Does it just push out? I want to open the port to .170".
  • Florence, Alabama
Umarex Gauntlet 0.25
Umarex Gauntlet 0.22
Hatsan BT65 QE 0.25
Benjamin Marauder 0.25
Benjamin Maximus 0.117
Shoebox F10 Compressor
ProDigital Chrony

Offline buldawg76

  • GTA Senior Contributor
  • ******
  • Posts: 2303
  • yes
  • Real Name: Mike
Re: Marauder Gen 2 .25 Stock Valve Question
« Reply #1 on: January 29, 2019, 10:33:01 PM »
Yes the poppet stem should slide in and out freely with the front nut and spring out like in the picture. try some oil put on the stem from the rear and see if you can get it freed up. If not it will need tapped out with a punch or small rod that will fit in the hole for the stem.

If you have to tap it out make sure you clean both stem and valve bore where stem fits and re check fit. if either is scored or shows signs of galling the vlave parts will need replaced.

Mike
  • Oxford, Alabama
Benjamin Marauder 177 in Boyds blaster stock 
Benjamin Marauder25 Wicked Air rifles bottled
Hatsan 22 AT 44S10 long
FWB 124 177 Tuned
FWB 300s Match L 177 Tuned
FWB 300s Match Junior 177 Tuned
Diana 48 177 Vortek Tuned
BAM 40/TX hybrid 177 Vortek Tuned
Xisisco 60C PCP Tuned
Benjamin Titan NP 22 Tuned GRT trigger
Crosman Titan GP 22 Tuned GRT trigger
Crosman Venom 177 Tuned GRT trigger
Taipan Mutant Standard 22, BSA FFP 4x14x44 scope




Bikes, Guns and Family is all I need for a good day

Offline triggertreat

  • 2017 GTA Fun Shoot Winner (PCP class)
  • GTA Senior Contributor
  • ******
  • Posts: 3546
  • ⊙ Aim high and shoot far ☆
  • Real Name: Keith
Re: Marauder Gen 2 .25 Stock Valve Question
« Reply #2 on: January 29, 2019, 10:59:12 PM »
You may have a bit of mushrooming going on on the stem tip.  You can just knock it out as mentioned already or try and file the tip a little first.  It should just fall out when normal.
  • TN
Great are you Lord.  It's your breath in our lungs, so I'll follow and praise you only.

22 Marauder Unregulated. Tuned using JSB 18.13gr:
30 Shots @ 31.02 FPE Avg., 1.36% ES, 1.58 FPE/CI
JSAR MDS Hammer, TSS and LW Air Tube mods.  MMHF barrel
UTG compact SWAT 4-16x44 IR SFP
25 Marauder Regulated. Tuned using JSB MKIIs:
24 Shots @ 55.94 FPE Avg., 1.96% ES, 1.49 FPE/CI
JSAR SS Valve, MDS Hammer, TSS and LW Air Tube mods.
Falcon Menace 5.5-25x50 IR FFP
357 Slayer Unregulated. Tuned using NSA 142gr:
4 shots @ 275.60 FPE Avg., 2.33% ES, 1.23 FPE/CI
Falcon Menace 5.5-25x56 FFP
DonnyFL Emperor LDC

Air Venturi 4500 psi compressor
Stickman fill assembly
60 min & 30 min 4500 psi CF tanks

Click here to download a Free Spreadsheet App (New Rev 05 ver. 11-16-18)

Offline farmerjoe99

  • N.U.A.H Marksman
  • Vendors
  • GTA Senior Contributor
  • *
  • Posts: 2444
    • DiscosRUs
  • Real Name: Joseph
Re: Marauder Gen 2 .25 Stock Valve Question
« Reply #3 on: January 29, 2019, 11:08:40 PM »
Hi Bob,
As they mentioned, once the rear valve cap and spring have been removed the poppet should slide out with a tap
on the tip of the protruding poppet.
  • Alfred NY
Discos R Us Airgun Store:
http://discosrus.net/

TO FIND A LOCAL SHOOTING FRIEND
  CLICK HERE FOR THE GTA MEMBERS MAP  >>>  https://www.zeemaps.com/map?group=962067

Offline brisner

  • Shooter
  • *
  • Posts: 29
  • yes
  • Real Name: Bob
Re: Marauder Gen 2 .25 Stock Valve Question
« Reply #4 on: January 29, 2019, 11:24:07 PM »
Thanks guys, I'll have to tap it out as I've pressed on it pretty hard with a small allen wrench and it will not come out.
  • Florence, Alabama
Umarex Gauntlet 0.25
Umarex Gauntlet 0.22
Hatsan BT65 QE 0.25
Benjamin Marauder 0.25
Benjamin Maximus 0.117
Shoebox F10 Compressor
ProDigital Chrony

Offline Motorhead

  • Field Target Shooter .... AAFTA 2018 Gran Prix Hunter PCP High Point Champion.
  • GTA Senior Contributor
  • ******
  • Posts: 13763
  • "EXPERIENCE" ... Our Reward For Lifes Mistakes
  • Real Name: Scott
Re: Marauder Gen 2 .25 Stock Valve Question
« Reply #5 on: January 30, 2019, 12:01:32 AM »
DON'T just force it out !!!
Likely it is mushroomed slightly and that needs to be removed from the stems end first !!!!!!!
  • Northern California ... Old Hangtown
** Home of MOTORHEADS AG Tuning Services **
        ** PM me for further contact & tuning info.

       Sacramento Valley Field Target Club
#https://sites.google.com/site/sacvalleyairgunclub/

Offline buldawg76

  • GTA Senior Contributor
  • ******
  • Posts: 2303
  • yes
  • Real Name: Mike
Re: Marauder Gen 2 .25 Stock Valve Question
« Reply #6 on: January 30, 2019, 02:18:41 AM »
By all means file or sand down any mushrooming or damage to the end of the stem before removing to prevent damaging the valves hole for the poppet.

Mike
  • Oxford, Alabama
Benjamin Marauder 177 in Boyds blaster stock 
Benjamin Marauder25 Wicked Air rifles bottled
Hatsan 22 AT 44S10 long
FWB 124 177 Tuned
FWB 300s Match L 177 Tuned
FWB 300s Match Junior 177 Tuned
Diana 48 177 Vortek Tuned
BAM 40/TX hybrid 177 Vortek Tuned
Xisisco 60C PCP Tuned
Benjamin Titan NP 22 Tuned GRT trigger
Crosman Titan GP 22 Tuned GRT trigger
Crosman Venom 177 Tuned GRT trigger
Taipan Mutant Standard 22, BSA FFP 4x14x44 scope




Bikes, Guns and Family is all I need for a good day

GTA - What's been your success with air gun target practice?
Sponsored Ad:
 

Sponsored Ad: