Ninja 90 cu/in EZ Fill Bottle



Author Topic: Ninja 90 cu/in EZ Fill Bottle  (Read 77 times))

Offline T3PRanch

  • Moderator
  • Plinker
  • *
  • Posts: 266
  • yes
    • T3P Ranch Airgun Solutions
  • Real Name: Thurmond
Ninja 90 cu/in EZ Fill Bottle
« on: August 12, 2018, 06:05:58 PM »
I just got a few of these in and I have to say they have the slickest fill valve I have ever used.

Features include:

    Made in the USA
    One handed valve operation.
    Valve is slow fill.
    Valve is self venting
    Hose is 21" from bottle to end of female foster and is anti whip if not attached to a male foster fitting.
    2 gauges one for bottle pressure and one for fill pressure.
    90 cu/in CF Bottle roughly 18 cu/ft of air.
    4500 PSI fill pressure. Unregulated Output pressure is same as what is currently in bottle.
    3lb 13 oz filled weight.

Priced competitively against comparable models at $349.99 and I'll include free shipping in the lower 48 states of the USA.
Add $15 for shipping to Alaska or Hawaii via Priority Mail 3-Day!
I have one of these for demo use and it is the slickest fill solution available that I have ever used.

I can also provide the EZ valve / hose / gauge assemblies and an adapter to use these on your large SCBA bottles or I can provide a fixed pressure regulator and adapter to fit your large bottles set to 3K PSI or a lower value you specify for tethered shooting. EZ Valve assembly bare is $176.95 and the required adapter runs about $55 delivered although you can order the adapters direct from Komptec for $39 plus shipping.

Contact me through my website contact page:

https://www.t3pranchags.com/about/

  • Spur,TX, USA

GTA - The best place for discussion about Air Guns.