XP-Airguns NEW Badger Stock sneak Peak



Author Topic: XP-Airguns NEW Badger Stock sneak Peak  (Read 538 times))

Offline T3PRanch

  • Moderator
  • Marksman
  • ***
  • Posts: 437
  • yes
    • T3P Ranch Airgun Solutions
  • Real Name: Thurmond
XP-Airguns NEW Badger Stock sneak Peak
« on: September 15, 2018, 01:45:49 PM »
There has been some talk about XP-Airguns selling their Badger direct. I spoke with Dan there for about an hour yesterday and here is a sneak peak of the stocks that XP will be using to replace the QB stocks that have been used on the Badger in the past. These stocks by the way are another creation of Doug (Mad Dog) Russel and will carry a lifetime warranty to the original purchaser as do all his stocks.
They will come with a pic rail and sling studs so out of the box all the gun needs is scope and rings. No additions / modifications necessary as with many guns these days.
« Last Edit: September 15, 2018, 01:48:15 PM by T3PRanch »
  • Spur,TX, USA

Offline AncientSword

  • Plinker
  • **
  • Posts: 259
  • yes
  • Real Name: Curt
Re: XP-Airguns NEW Badger Stock sneak Peak
« Reply #1 on: September 18, 2018, 05:44:10 PM »
I'm in for one! Those look like a nice upgrade.
  • USA, FL, Deltona
Disco .177
Hatsan AT44 .177
Evanix AR6 pistol .22
Evanix AR6 break down combo .22
Listone Firearrow .25
Marauder .25 w/ Boyds blaster, ext shroud & tube
Condor .257 w/ Noble goodies
Extreme Big Bore .308 w/ XTR Chassis
Hatsan Hercules .357
Epox Badger .40 w/ Maddog stock
Sam Yang Dragon Claw .50 w/ Will Piatt Tune

Offline T3PRanch

  • Moderator
  • Marksman
  • ***
  • Posts: 437
  • yes
    • T3P Ranch Airgun Solutions
  • Real Name: Thurmond
Re: XP-Airguns NEW Badger Stock sneak Peak
« Reply #2 on: October 11, 2018, 04:55:26 PM »
Update:  Mad Dog will be selling these stocks immediately. He is caught up from the pre hunting season rush right now and ready to build as soon as you order from me or direct from him. Price is just under $250 direct from Doug at MadDog.

In the Pro-Classic stock the gun weighs 7lbs. 10oz.

If you order through me then about 5% lower price is what you will pay.

The stocks are not yet up on his website so you have to call for the time being to order one.

These stocks are warranted by Mad Dog for life to the original purchaser. They are built with a Maple core and poplar outer layers. Covered with a bed liner type all weather durable coating.
Thin sections are pinned to prevent breakage.

All come with a rail and sling studs installed at no additional cost.

New pictures will be posted here ASAP!
« Last Edit: October 11, 2018, 10:45:26 PM by T3PRanch »
  • Spur,TX, USA

Offline AncientSword

  • Plinker
  • **
  • Posts: 259
  • yes
  • Real Name: Curt
Re: XP-Airguns NEW Badger Stock sneak Peak
« Reply #3 on: October 11, 2018, 10:33:05 PM »
Doug called me tonight and I'm right behind you in line for one. I contacted him right after your first post about getting one.

Thanks for bringing this to my attention.
« Last Edit: October 11, 2018, 10:48:34 PM by AncientSword »
  • USA, FL, Deltona
Disco .177
Hatsan AT44 .177
Evanix AR6 pistol .22
Evanix AR6 break down combo .22
Listone Firearrow .25
Marauder .25 w/ Boyds blaster, ext shroud & tube
Condor .257 w/ Noble goodies
Extreme Big Bore .308 w/ XTR Chassis
Hatsan Hercules .357
Epox Badger .40 w/ Maddog stock
Sam Yang Dragon Claw .50 w/ Will Piatt Tune

Offline T3PRanch

  • Moderator
  • Marksman
  • ***
  • Posts: 437
  • yes
    • T3P Ranch Airgun Solutions
  • Real Name: Thurmond
Re: XP-Airguns NEW Badger Stock sneak Peak
« Reply #4 on: October 12, 2018, 01:41:51 AM »
Dan is shipping my "Display Badger" with the Pro-Classic Stock #1 tomorrow.

If anyone needs a complete Mad Dog Badger package with Tactical or Pro-Classic stocks let me know.

I can make it happen.

All you need is scope, rings, sling, ammo and air to go hunting with this gun. (I can offer some good prices on all these items).

Thurmond Moore
https://www.t3pranchags.com/about/
  • Spur,TX, USA

Offline T3PRanch

  • Moderator
  • Marksman
  • ***
  • Posts: 437
  • yes
    • T3P Ranch Airgun Solutions
  • Real Name: Thurmond
Re: XP-Airguns NEW Badger Stock sneak Peak
« Reply #5 on: October 17, 2018, 02:09:00 AM »
I received my XP-Badger and Pro-Classic stock #1 yesterday (the exact one pictured in the first 4 pics of the 3rd post in this thread). I am stoked. I also communicated with Mr. Hollowpoint and he is currently casting me up a sampler for all my guns including the Badger. I also ordered some .41 caliber Lee molds to cast some of my own bullets for the Badger (I am a Lee Precision dealer too). I picked up a set of Leupold 30mm weaver rings today since the installed weaver bases do not take picatinny which is the only thing I had on hand. The gun now sports a Hawk Airmax 30 6-24 X 50 scope. It shoulders like a dream and is very well balanced. It weighs in at around 9 lbs. with the scope and rings but feels lighter due to balance. LOP is SO much better than with the original QB stocks the Badgers have sold with till now.
« Last Edit: October 17, 2018, 02:11:50 AM by T3PRanch »
  • Spur,TX, USA

Offline Ben in Va

  • Plinker
  • **
  • Posts: 298
  • yes
  • Real Name: Ben
Re: XP-Airguns NEW Badger Stock sneak Peak
« Reply #6 on: October 17, 2018, 02:05:39 PM »
Looking good!  And the rails and sling studs come included?  Anyway to get a different color?
  • Made in the Virginia based U.S.A. factory
The Mad-Badger XP especial .357
WP tuned Evanix RS2 .25
MAC1 Steroided Benji 392
Vorteked RWS 48 .22
AlchemyAirWerks'd P1377
CZ200 .177 with the red and black dress
CC 2300KT .177 Pistol

Offline T3PRanch

  • Moderator
  • Marksman
  • ***
  • Posts: 437
  • yes
    • T3P Ranch Airgun Solutions
  • Real Name: Thurmond
Re: XP-Airguns NEW Badger Stock sneak Peak
« Reply #7 on: October 19, 2018, 09:54:00 PM »
Looking good!  And the rails and sling studs come included?  Anyway to get a different color?

Yes Rail and Studs are included. The stock is given a bed liner type coating. I will inquire if different colors are available.

Thurmond Moore
T3P Ranch AirGun Solutions
615 FM 261
Spur, TX 79370
806-294-5500 Between 10am and 6pm Central please.
http://www.T3PRanchAGS.com
  • Spur,TX, USA

Offline Ben in Va

  • Plinker
  • **
  • Posts: 298
  • yes
  • Real Name: Ben
Re: XP-Airguns NEW Badger Stock sneak Peak
« Reply #8 on: October 23, 2018, 01:34:06 PM »
Thanks.  Talked with Doug.  Looks like OD Green and Tan will be available along with black.  Looks like he now has them on his web site.


Looking good!  And the rails and sling studs come included?  Anyway to get a different color?

Yes Rail and Studs are included. The stock is given a bed liner type coating. I will inquire if different colors are available.

Thurmond Moore
T3P Ranch AirGun Solutions
615 FM 261
Spur, TX 79370
806-294-5500 Between 10am and 6pm Central please.
http://www.T3PRanchAGS.com
  • Made in the Virginia based U.S.A. factory
The Mad-Badger XP especial .357
WP tuned Evanix RS2 .25
MAC1 Steroided Benji 392
Vorteked RWS 48 .22
AlchemyAirWerks'd P1377
CZ200 .177 with the red and black dress
CC 2300KT .177 Pistol

Offline DLP

  • Plinker
  • **
  • Posts: 253
  • yes
  • Real Name: Darrell
Re: XP-Airguns NEW Badger Stock sneak Peak
« Reply #9 on: October 23, 2018, 09:05:37 PM »
Looks like a nice upgrade from the stock one. Been waiting for about 6 weeks for my walnut stock from Richards. They called last night and said it should ship by the end of the week. I have sent several emails to Dan at XP Airguns trying to get a valve spring holder. He said they were shipped. But nothing yet. Trying to find a number for him. Any one have one for him? Thanks Darrell
  • USA-MI-Morrice
.40 Badger
.45 Bully
.25 Mrod
.22 Disco
.22 pp700w
.22 Prod
.20 Beeman R-10
.20 1975 Dan
Few other springers
ShoeBox F10
ShoeBox MAXX
60, 30 min tanks

Offline T3PRanch

  • Moderator
  • Marksman
  • ***
  • Posts: 437
  • yes
    • T3P Ranch Airgun Solutions
  • Real Name: Thurmond
Re: XP-Airguns NEW Badger Stock sneak Peak
« Reply #10 on: October 25, 2018, 09:27:48 PM »
Looks like a nice upgrade from the stock one. Been waiting for about 6 weeks for my walnut stock from Richards. They called last night and said it should ship by the end of the week. I have sent several emails to Dan at XP Airguns trying to get a valve spring holder. He said they were shipped. But nothing yet. Trying to find a number for him. Any one have one for him? Thanks Darrell

Best way to get hold of Dan is via e-mail usually!
  • Spur,TX, USA

GTA - The best place for discussion about Air Guns.
 

Sponsored Ad: