Jim, Mag. Length Info Needed



Author Topic: Jim, Mag. Length Info Needed  (Read 261 times))

Online rsterne

  • Member 2000+fps Club
  • Bob and Lloyd
  • GTA Senior Contributor
  • *****
  • Posts: 20995
  • GTA Forums Person of the Year 2017
    • Mozey-On-Inn
  • Real Name: Bob
Jim, Mag. Length Info Needed
« on: August 11, 2018, 01:58:40 PM »
HI Jim....

Could you please post the maximum pellet length that the FLEX mags. will accept in these threads....

.30 cal.... https://www.gatewaytoairguns.org/GTA/index.php?topic=146831.0

.35 cal if you do one.... https://www.gatewaytoairguns.org/GTA/index.php?topic=146863.0

If you produce guns with other mag. lengths, please add them as well....

Bob
  • Coalmont, BC, Canada
Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsenal:
1750 CO2 Carbine, .177 Uber-Pumper, .22 Uber-Carbine, .25 Discovery, 2260 PCP 8-shot Carbine, 2260 HPA (37 FPE), 2560 HPA (52 FPE), .22 QB79 HPA, Disco Doubles in .22, .25 & .30 cal, "Hayabusa" Custom PCP Project (Mk.I is .22 & .25 cal regulated; Mk.II is .224, .257, 7mm, .308 & .357; Mk.III is .410 shotgun and .458 cal), .257 "Monocoque" Bench PCP, 6mm Regulated PCP and .257 Unregulated, Three BRods.

Offline Marmot_Militia

  • Vendors
  • Shooter
  • *
  • Posts: 64
  • yes
  • Real Name: Jim Gaska
Re: Jim, Mag. Length Info Needed
« Reply #1 on: August 22, 2018, 06:31:39 PM »
Done.  Thanks for asking.

Jim
  • Nicholasville, KY, USA

Online rsterne

  • Member 2000+fps Club
  • Bob and Lloyd
  • GTA Senior Contributor
  • *****
  • Posts: 20995
  • GTA Forums Person of the Year 2017
    • Mozey-On-Inn
  • Real Name: Bob
Re: Jim, Mag. Length Info Needed
« Reply #2 on: August 22, 2018, 06:44:44 PM »
Thanks....

Bob
  • Coalmont, BC, Canada
Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsenal:
1750 CO2 Carbine, .177 Uber-Pumper, .22 Uber-Carbine, .25 Discovery, 2260 PCP 8-shot Carbine, 2260 HPA (37 FPE), 2560 HPA (52 FPE), .22 QB79 HPA, Disco Doubles in .22, .25 & .30 cal, "Hayabusa" Custom PCP Project (Mk.I is .22 & .25 cal regulated; Mk.II is .224, .257, 7mm, .308 & .357; Mk.III is .410 shotgun and .458 cal), .257 "Monocoque" Bench PCP, 6mm Regulated PCP and .257 Unregulated, Three BRods.

GTA - The best place for discussion about Air Guns.