Talondor 25 build for slugs



Author Topic: Talondor 25 build for slugs  (Read 3365 times))

Offline AncientSword

  • Plinker
  • **
  • Posts: 259
  • yes
  • Real Name: Curt
Re: Talondor 25 build for slugs
« Reply #40 on: June 12, 2018, 09:42:28 PM »
I'll let you about the accuracy of the .250 barrel and how it does. 

Have you shot the new barrel yet?

I was wondering if you have tried any of the heavier slugs you have?

R&L said the leade was cut in to allow for 45 grain slugs, but couldn't tell me up to what size slugs it will take. I'm interested to see if the larger slugs you have will fit.
« Last Edit: June 12, 2018, 09:48:37 PM by AncientSword »
  • USA, FL, Deltona
Disco .177
Hatsan AT44 .177
Evanix AR6 pistol .22
Evanix AR6 break down combo .22
Listone Firearrow .25
Marauder .25 w/ Boyds blaster, ext shroud & tube
Condor .257 w/ Noble goodies
Extreme Big Bore .308 w/ XTR Chassis
Hatsan Hercules .357
Epox Badger .40 w/ Maddog stock
Sam Yang Dragon Claw .50 w/ Will Piatt Tune

Offline mann

  • Expert
  • *****
  • Posts: 1084
  • yes
  • Real Name: Mark
Re: Talondor 25 build for slugs
« Reply #41 on: June 12, 2018, 10:46:20 PM »
I shot 39 gr and 59 gr the 39 gr went all the way in the barrel 59 gr went in alittle over half way didn't seem to effect velocty though got 958 with it only part way seated with modded hi Flo valve I'll take it out  tomorrow and shoot some see how it does I was waiting for my valve to get back from Doug it had a leak and he was going to fix it
  • USA   Dakota.  MN

Offline KnifeMaker

  • GTA Senior Contributor
  • ******
  • Posts: 4489
  • yes
  • Real Name: Michael
Re: Talondor 25 build for slugs
« Reply #42 on: June 13, 2018, 01:24:01 AM »
Be very careful of halfway seated bullets. It acts as a barrel obstruction and can blow  the breach up in you face! >:(


Been there, done that. Glad I was wearing shooting glasses at the time. ;)

Knife
« Last Edit: June 16, 2018, 02:11:24 AM by KnifeMaker »
  • Central Texas

Offline mann

  • Expert
  • *****
  • Posts: 1084
  • yes
  • Real Name: Mark
Re: Talondor 25 build for slugs
« Reply #43 on: June 13, 2018, 01:27:36 AM »
True didn't think about that they came spitting sized to .250 probably should use a stronger breech I guess and get the bullets seated all the way
  • USA   Dakota.  MN

Offline mann

  • Expert
  • *****
  • Posts: 1084
  • yes
  • Real Name: Mark
Re: Talondor 25 build for slugs
« Reply #44 on: June 13, 2018, 05:00:51 PM »
Made a new breech out of aluminum
  • USA   Dakota.  MN

Offline mann

  • Expert
  • *****
  • Posts: 1084
  • yes
  • Real Name: Mark
Re: Talondor 25 build for slugs
« Reply #45 on: June 13, 2018, 05:04:59 PM »
New breech
  • USA   Dakota.  MN

Offline mann

  • Expert
  • *****
  • Posts: 1084
  • yes
  • Real Name: Mark
Re: Talondor 25 build for slugs
« Reply #46 on: June 13, 2018, 08:11:00 PM »
Removed the barrel and cut the leade deeper so the 59 gr slugs will seat all the way in now so there not sticking out part way any more
  • USA   Dakota.  MN

Offline mann

  • Expert
  • *****
  • Posts: 1084
  • yes
  • Real Name: Mark
Re: Talondor 25 build for slugs
« Reply #47 on: June 14, 2018, 05:41:47 PM »
Well I did some shooting with the 39 gr hollow points from 3000 psi to 2000 I used the 39 gr because I had a 100 of them and had to sight in some what . I'll say it's pretty accurate 50 yards 3 shot group all three touching and I'm not the greatest group shooter with out especially with out a good rest . This was with my hi Flo valve too
  • USA   Dakota.  MN

Offline mann

  • Expert
  • *****
  • Posts: 1084
  • yes
  • Real Name: Mark
Re: Talondor 25 build for slugs
« Reply #48 on: June 15, 2018, 02:28:52 PM »
First try of peek poppet for hi Flo valve
  • USA   Dakota.  MN

Offline mann

  • Expert
  • *****
  • Posts: 1084
  • yes
  • Real Name: Mark
Re: Talondor 25 build for slugs
« Reply #49 on: June 15, 2018, 04:45:39 PM »
Well I got the peek poppet together it's tapered to .240 so the spring will seat on to it and it goes up to .310 and the front is rounded that goes into the throat area and seals it is about .050 smaller than the original and should be smoother flow around it I would think
  • USA   Dakota.  MN

Offline mann

  • Expert
  • *****
  • Posts: 1084
  • yes
  • Real Name: Mark
Re: Talondor 25 build for slugs
« Reply #50 on: June 15, 2018, 04:48:38 PM »
The original poppet
  • USA   Dakota.  MN

Offline mann

  • Expert
  • *****
  • Posts: 1084
  • yes
  • Real Name: Mark
Re: Talondor 25 build for slugs
« Reply #51 on: June 15, 2018, 05:03:15 PM »
Talondor .250 with my hawke airmax 30
  • USA   Dakota.  MN

How do you word it... "Air Guns" or "AirGuns"?
Sponsored Ad:
 

Sponsored Ad: