Author Topic: prod (Read 2426 times))

horseman76 · « **on:** April 22, 2018, 11:05:23 PM »

Hope somebody can help.who makes custom stocks for the prod ,I haven't used this piece for a while ,got it out the other day and found I'd put it away because of the plastic a little advise would be appreciated. Thanks in advance. Wayne

Xraycer · « **Reply #1 on:** April 22, 2018, 11:53:39 PM »

Quote from: horseman76 on April 22, 2018, 11:05:23 PM

Hope somebody can help.who makes custom stocks for the prod ,I haven't used this piece for a while ,got it out the other day and found I'd put it away because of the plastic a little advise would be appreciated. Thanks in advance. Wayne

I can't think of his name (Tom?), but I recall he makes a gorgeous laminated stock for PRods. I remember chatting with him on "hunting gate" last year.

Wayne52 · « **Reply #2 on:** April 23, 2018, 06:19:55 AM »

I'd love to find a good place to buy the butt stock and fore stock in walnut. Alchemywerks use to have them in unfinished American walnut but not anymore.

Xraycer · « **Reply #3 on:** April 23, 2018, 09:10:35 AM »

Found him!

https://www.gatewaytoairguns.org/GTA/index.php?action=profile;u=24739

Here's one of his beauties

Airgunhunter73 · « **Reply #4 on:** April 23, 2018, 10:40:29 AM »

Tom West is the guy your looking for he sells these beautiful stocks on eBay I bought one for my DAQ outlaw 58cal pistol I had to open up the channel so it would fit the air tube.

kzz1kaw · « **Reply #5 on:** April 24, 2018, 10:13:53 PM »

Mine in teak wood😎

Wayne52 · « **Reply #6 on:** April 25, 2018, 04:42:58 AM »

Ken those guys that you're lucky enough to deal with in the Philippines really do a fantastic job.

kzz1kaw · « **Reply #7 on:** April 25, 2018, 07:27:54 AM »

Thanks Wayne. Have two other guns with unique stocks from the Philippines that I’ve yet to show. Stand by😎

archellas · « **Reply #8 on:** April 25, 2018, 01:11:38 PM »

Quote from: kzz1kaw on April 25, 2018, 07:27:54 AM

Thanks Wayne. Have two other guns with unique stocks from the Philippines that I’ve yet to show. Stand by😎

Ken,

Please do not show them to us ..... not all of us are lucky to get them ..... and I know I am very jealous! Wicked looking!!!

Cheers

kzz1kaw · « **Reply #9 on:** April 25, 2018, 06:12:59 PM »

Quote from: archellas on April 25, 2018, 01:11:38 PM

Quote from: kzz1kaw on April 25, 2018, 07:27:54 AM
Thanks Wayne. Have two other guns with unique stocks from the Philippines that I’ve yet to show. Stand by😎

Ken,

Please do not show them to us ..... not all of us are lucky to get them ..... and I know I am very jealous! Wicked looking!!!

Cheers

All of us have a common interest. Airguns😎 it’s good to see what other countries such as the Philippines who also have a common interest. Airguns except that they cannot afford a $1000 gun. So they do the best they can by looking a guns on the internet and try to copy them. They have the same passion as we do but their Airguns are custom made and a worker art. Pictures don’t do my guns no justice. Over the next couple weeks I will post some of these wonderful examples of a custom made airgun one with a brass barrel cock type action,a Bullpup stock looks like The Ataman Bullpup, a bench rest gun with two different stocks

Old Corps · « **Reply #10 on:** April 25, 2018, 07:01:57 PM »

Quote from: archellas on April 25, 2018, 01:11:38 PM

Quote from: kzz1kaw on April 25, 2018, 07:27:54 AM
Thanks Wayne. Have two other guns with unique stocks from the Philippines that I’ve yet to show. Stand by😎

Ken,

Please do not show them to us ..... not all of us are lucky to get them ..... and I know I am very jealous! Wicked looking!!!

+1!
Amen to that-GORGEOUS!!!

Ed
Cheers

Old Corps · « **Reply #11 on:** April 25, 2018, 07:06:10 PM »

Quote from: Xraycer on April 23, 2018, 09:10:35 AM

Found him!

https://www.gatewaytoairguns.org/GTA/index.php?action=profile;u=24739

Here's one of his beauties

That one's a beauty too!

Hate to think what one of 'em costs..............

Ed

kzz1kaw · « **Reply #12 on:** April 25, 2018, 07:59:22 PM »

Don’t be a hater but all my stocks cost me 3500 pesos or $67.00 each in any wood I choose😎

Old Corps · « **Reply #13 on:** April 25, 2018, 11:06:04 PM »

Quote from: kzz1kaw on April 25, 2018, 07:59:22 PM

Don’t be a hater but all my stocks cost me 3500 pesos or $67.00 each in any wood I choose😎

WOW!!! That's AMAZING!

Sure wish whomever makes 'em would ship to the States!

Ed

Gipper · « **Reply #14 on:** April 26, 2018, 08:43:17 AM »

Quote from: Old Corps on April 25, 2018, 07:06:10 PM

Quote from: Xraycer on April 23, 2018, 09:10:35 AM
Found him!

https://www.gatewaytoairguns.org/GTA/index.php?action=profile;u=24739

Here's one of his beauties

That one's a beauty too! Hate to think what one of 'em costs..............

Ed

Tom is actually quite reasonable on his prices, you may be surprised!!!

FuzzyGrub · « **Reply #15 on:** April 26, 2018, 10:23:22 AM »

I have one of Tom's stocks for prod/1720T. Beautiful piece of furniture for your gun. FWIW: the pistol grip is on the fat side, but you tend to get use to it. I'm always worried I'm going to bang it up while out in the woods.

Old Corps · « **Reply #16 on:** April 26, 2018, 04:08:12 PM »

Very nice John!

I did notice that the grip seems to be on the "beefy" side. As you said, I'm sure one gets used to it but I'd like it a little slimmer.........IF I were to get one. Methinks maybe he makes 'em like that for strength.

Ed

Rick67 · « **Reply #17 on:** April 26, 2018, 10:14:59 PM »

I know of a stock maker who does fantastic work but he does laminates. I have 3 of his stocks but they are for the 10/22..All cnc made and fit and finish is superb. Frankly, I am 100% sure there is no one who will beat his action to stock fit, he is that good. Perhaps he will do it if there is a bunch of orders. Right now, he plans to make stocks for the CZ 455..

I do not know if I am allowed to post PB pics. If not, mods can erase it.

The big ones are BR NightHawk stocks and the burgundy one is a sporter called the Avenger, gents.

He even makes his own acrylic buttpads:

FuzzyGrub · « **Reply #18 on:** April 27, 2018, 07:34:52 AM »

Quote from: Old Corps on April 26, 2018, 04:08:12 PM

Very nice John! I did notice that the grip seems to be on the "beefy" side. As you said, I'm sure one gets used to it but I'd like it a little slimmer.........IF I were to get one. Methinks maybe he makes 'em like that for strength.

I have had other stocks that are "fat" there, such as the MDRL bullpup and Boyds Pro-Varmint.

kzz1kaw · « **Reply #19 on:** April 27, 2018, 09:27:59 AM »

Quote from: Rick67 on April 26, 2018, 10:14:59 PM

I know of a stock maker who does fantastic work but he does laminates. I have 3 of his stocks but they are for the 10/22..All cnc made and fit and finish is superb. Frankly, I am 100% sure there is no one who will beat his action to stock fit, he is that good. Perhaps he will do it if there is a bunch of orders. Right now, he plans to make stocks for the CZ 455..

I do not know if I am allowed to post PB pics. If not, mods can erase it.

The big ones are BR NightHawk stocks and the burgundy one is a sporter called the Avenger, gents.

He even makes his own acrylic buttpads:

Those stock are absolutely beautiful 😳😎👍🏾

Thank you to our advertisers!

prod

Author Topic: prod (Read 2426 times))