Xisico Sentry projects



Author Topic: Xisico Sentry projects  (Read 10373 times))

Offline Hobbyman2007

  • N.U.A.H. Expert
  • Expert
  • *****
  • Posts: 1071
  • yes
  • Real Name: Denis
Re: Xisico Sentry projects
« Reply #120 on: May 18, 2018, 08:12:54 AM »
Eric , Iíve been waiting to see if you completed the bulldog magazine install on the Sentry. I may have found a source here in Canada but the stock magazine is not what Iím after .
  • Dowling,ontario, Canada
ď if God didnít want us to own guns , he wouldnít have given us trigger fingersĒ
Unknown

Offline TleVta

  • Sharp Shooter
  • ****
  • Posts: 852
  • yes
  • Real Name: Terry
Re: Xisico Sentry projects
« Reply #121 on: May 23, 2018, 08:59:42 PM »
My Seadek order finally got here today. So I removed the bio hazard off my CP and went to work.



Sanding drum works great for rounding edges. I ran it perpendicular and tapered the edge I cut. I used a straight edge for a guide and set the motor on low RPM. No I didn't do that in the kitchen..



And I had plenty left over for the hook.



Nice stuff. I like it.
  • Ventura, CA
"Only accurate rifles are interesting".
--Colonel Townsend Whelen---
https://en.wikipedia.org/wiki/Townsend_Whelen

Offline stalwart

  • Expert
  • *****
  • Posts: 1717
  • Eric
    • http://www.stalwartarms.com/
Re: Xisico Sentry projects
« Reply #122 on: May 23, 2018, 09:21:36 PM »
Eric , Iíve been waiting to see if you completed the bulldog magazine install on the Sentry. I may have found a source here in Canada but the stock magazine is not what Iím after .

The BD mag is cut into the receiver, and just *barely* fits. I have not set up the retaining ball yet, but have it figured out. Lots going on here. There is space to fit any mag I've seen, as the BDs are as big as it gets.

Sorry about the late answer, but the "notifications" function didn't function. Comes and goes...

My Seadek order finally got here today. So I removed the bio hazard off my CP and went to work.


Nice stuff. I like it.

Beautiful job, and a great post. Thanks.

Quite pretty... good color choice for that gun.
« Last Edit: June 19, 2018, 10:12:29 PM by stalwart »

Offline TleVta

  • Sharp Shooter
  • ****
  • Posts: 852
  • yes
  • Real Name: Terry
Re: Xisico Sentry projects
« Reply #123 on: May 23, 2018, 09:23:48 PM »
I chose that color so the CP won't cook too much in the sun while waiting my turn to shoot. They do have a good color selection. I liked the camo that's available.
  • Ventura, CA
"Only accurate rifles are interesting".
--Colonel Townsend Whelen---
https://en.wikipedia.org/wiki/Townsend_Whelen

Offline stalwart

  • Expert
  • *****
  • Posts: 1717
  • Eric
    • http://www.stalwartarms.com/
Re: Xisico Sentry projects
« Reply #124 on: May 23, 2018, 09:30:18 PM »
No stench, no burns... good call.

Offline avator

  • GTA Senior Contributor
  • ******
  • Posts: 17746
  • Happiness is a warm airgun... -Lennon Modded-
  • Real Name: Bill
Re: Xisico Sentry projects
« Reply #125 on: May 24, 2018, 01:12:07 PM »
Sounds like a Duluth Trading Co. commercial...
  • From deep within the Rabbit Hole, Alabama
Favorite Everyday Shooters:
Sam Yang Sumatra 2500 carbine .25
Urban .22
AirMax Varmint w/ .22 CP-2 long barrel
AirMax Plinkster .177
CP1 .177 Mini Carbine
CP2 w/ .177 Varmint long barrel
XS-60C GenI .22
2-22XX Carbine HPA .177
2240 Stubby .22
Blaze NP .177
3-M/M Daisy 881
2-Mendoza RM377 .177
2-XS-12 .177
1-Hatsan 1000x .177 Carbine (Pvt. Stryker)
Various Others

AirMax Extreme MKII 4500

Vintage - too many to list

Offline stalwart

  • Expert
  • *****
  • Posts: 1717
  • Eric
    • http://www.stalwartarms.com/
Re: Xisico Sentry projects
« Reply #126 on: May 25, 2018, 04:58:59 PM »
Sounds like a Duluth Trading Co. commercial...

Well, they do sell underwear... and both attributes are desirable in that context.

 ;D

Offline Hoosier Daddy

  • GTA Senior Contributor
  • ******
  • Posts: 7169
  • Psalm 144:1-2
  • Real Name: Scott
Re: Xisico Sentry projects
« Reply #127 on: May 26, 2018, 07:21:33 PM »
Best commercials ever!
Pistols
Crosman: PC77, 1740
Benjiman H9A

Rifles
Air Arms: S400-SL Carbine FAC
Beeman: RS2 Silver Kodiak,
Benjamin: 312, 342, 392P, 392PA, Maximus
Crosman: Genesis NP .22, Quest 1000X, Raven, 2nd & 3rd var 160's
Feinwerkbau: FWB 300S
Gamo: Recon
SAG: AR2078-B, QB58
Sheridan: C Blue Streak, C9 Blue Streak, Model F Co2
Xisico: XS60C .22, Sentry 702-3 .22

Proud Member of F.U.G.L.Y.

Offline stalwart

  • Expert
  • *****
  • Posts: 1717
  • Eric
    • http://www.stalwartarms.com/
Re: Xisico Sentry projects
« Reply #128 on: June 02, 2018, 11:43:25 PM »
This is why I said I was happy to compromise on the long transfer port length.

Zero drop. ~25cc plenum... but I can add all the plenum you'd want, it just makes the lower longer.

Offline stalwart

  • Expert
  • *****
  • Posts: 1717
  • Eric
    • http://www.stalwartarms.com/
Re: Xisico Sentry projects
« Reply #129 on: June 03, 2018, 04:32:36 PM »
All the pistol parts are finally in the same place.

Balance point is at the F edge of the receiver... perfect.

4#, 5.6oz. Not too bad, but there is a little left to lose.

Offline avator

  • GTA Senior Contributor
  • ******
  • Posts: 17746
  • Happiness is a warm airgun... -Lennon Modded-
  • Real Name: Bill
Re: Xisico Sentry projects
« Reply #130 on: June 04, 2018, 08:21:16 AM »
Now if that don't look like something you would board a pirate ship with.. nothing does.
  • From deep within the Rabbit Hole, Alabama
Favorite Everyday Shooters:
Sam Yang Sumatra 2500 carbine .25
Urban .22
AirMax Varmint w/ .22 CP-2 long barrel
AirMax Plinkster .177
CP1 .177 Mini Carbine
CP2 w/ .177 Varmint long barrel
XS-60C GenI .22
2-22XX Carbine HPA .177
2240 Stubby .22
Blaze NP .177
3-M/M Daisy 881
2-Mendoza RM377 .177
2-XS-12 .177
1-Hatsan 1000x .177 Carbine (Pvt. Stryker)
Various Others

AirMax Extreme MKII 4500

Vintage - too many to list

Offline stalwart

  • Expert
  • *****
  • Posts: 1717
  • Eric
    • http://www.stalwartarms.com/
Re: Xisico Sentry projects
« Reply #131 on: June 04, 2018, 02:35:19 PM »
Now if that don't look like something you would board a pirate ship with.. nothing does.

You like?

As mentioned in the 60 thread, there are legal pot farms nearby, and they are not allowed (by local ordinance) any firearms. Looks like I have a couple rigs sold to 1 farm (we'll see, still just talk), and I'm going to build them unregged 4.5K big bores that closely resemble this one.

This one gets no frills, looking for race weight... but, the defense rigs might get a little tactical. They won't be hiked with, so a little more weight won't matter.

Offline avator

  • GTA Senior Contributor
  • ******
  • Posts: 17746
  • Happiness is a warm airgun... -Lennon Modded-
  • Real Name: Bill
Re: Xisico Sentry projects
« Reply #132 on: June 04, 2018, 03:26:16 PM »
Be interesting to see what form of payment you'll be receiving.
  • From deep within the Rabbit Hole, Alabama
Favorite Everyday Shooters:
Sam Yang Sumatra 2500 carbine .25
Urban .22
AirMax Varmint w/ .22 CP-2 long barrel
AirMax Plinkster .177
CP1 .177 Mini Carbine
CP2 w/ .177 Varmint long barrel
XS-60C GenI .22
2-22XX Carbine HPA .177
2240 Stubby .22
Blaze NP .177
3-M/M Daisy 881
2-Mendoza RM377 .177
2-XS-12 .177
1-Hatsan 1000x .177 Carbine (Pvt. Stryker)
Various Others

AirMax Extreme MKII 4500

Vintage - too many to list

Offline stalwart

  • Expert
  • *****
  • Posts: 1717
  • Eric
    • http://www.stalwartarms.com/
Re: Xisico Sentry projects
« Reply #133 on: June 04, 2018, 03:44:07 PM »
Be interesting to see what form of payment you'll be receiving.

That didn't occur to me, but there clearly are options!

Offline Hobbyman2007

  • N.U.A.H. Expert
  • Expert
  • *****
  • Posts: 1071
  • yes
  • Real Name: Denis
Re: Xisico Sentry projects
« Reply #134 on: June 04, 2018, 05:07:40 PM »
I know what option Iíd take 😂. JK , in my younger days there would have only been the one option. I kinda like the pirate look . Iíve been wondering about a short .6Ē shot shell that I could use in a smooth bore close to .357 cal . Have any ideas Erik .
  • Dowling,ontario, Canada
ď if God didnít want us to own guns , he wouldnít have given us trigger fingersĒ
Unknown

Offline avator

  • GTA Senior Contributor
  • ******
  • Posts: 17746
  • Happiness is a warm airgun... -Lennon Modded-
  • Real Name: Bill
Re: Xisico Sentry projects
« Reply #135 on: June 04, 2018, 06:08:10 PM »
I have just the thing but unfortunately it don't come in the air powered form....
.410/.45
  • From deep within the Rabbit Hole, Alabama
Favorite Everyday Shooters:
Sam Yang Sumatra 2500 carbine .25
Urban .22
AirMax Varmint w/ .22 CP-2 long barrel
AirMax Plinkster .177
CP1 .177 Mini Carbine
CP2 w/ .177 Varmint long barrel
XS-60C GenI .22
2-22XX Carbine HPA .177
2240 Stubby .22
Blaze NP .177
3-M/M Daisy 881
2-Mendoza RM377 .177
2-XS-12 .177
1-Hatsan 1000x .177 Carbine (Pvt. Stryker)
Various Others

AirMax Extreme MKII 4500

Vintage - too many to list

Offline Vee3

  • Plinker
  • **
  • Posts: 276
  • yes
  • Real Name: Victor
Re: Xisico Sentry projects
« Reply #136 on: June 04, 2018, 06:32:42 PM »
Now if that don't look like something you would board a pirate ship with.. nothing does.

Maybe an airship, lol.
  • CA

Offline Hoosier Daddy

  • GTA Senior Contributor
  • ******
  • Posts: 7169
  • Psalm 144:1-2
  • Real Name: Scott
Re: Xisico Sentry projects
« Reply #137 on: June 04, 2018, 07:39:34 PM »
I have just the thing but unfortunately it don't come in the air powered form....
.410/.45

Nothing like a scatter gun pistol that fits in a tool box. That would be nice to have. I used to work in some shady places late.
Wish I knew where one was...
« Last Edit: June 05, 2018, 01:09:48 PM by Hoosier Daddy »
Pistols
Crosman: PC77, 1740
Benjiman H9A

Rifles
Air Arms: S400-SL Carbine FAC
Beeman: RS2 Silver Kodiak,
Benjamin: 312, 342, 392P, 392PA, Maximus
Crosman: Genesis NP .22, Quest 1000X, Raven, 2nd & 3rd var 160's
Feinwerkbau: FWB 300S
Gamo: Recon
SAG: AR2078-B, QB58
Sheridan: C Blue Streak, C9 Blue Streak, Model F Co2
Xisico: XS60C .22, Sentry 702-3 .22

Proud Member of F.U.G.L.Y.

Offline stalwart

  • Expert
  • *****
  • Posts: 1717
  • Eric
    • http://www.stalwartarms.com/
Re: Xisico Sentry projects
« Reply #138 on: June 05, 2018, 12:43:59 PM »
I know what option Iíd take 😂. JK , in my younger days there would have only been the one option. I kinda like the pirate look . Iíve been wondering about a short .6Ē shot shell that I could use in a smooth bore close to .357 cal . Have any ideas Erik .

None... but, I will say that I have been wanting to research the topic for a snake gun. Something super light... couple heavy shots. I read everything I see here on scatterguns. We're still looking at a bunch of work to just equal a .410 Derringer.

Considering an add-on set up (like a grenade launcher on an AR).

Offline stalwart

  • Expert
  • *****
  • Posts: 1717
  • Eric
    • http://www.stalwartarms.com/
Re: Xisico Sentry projects
« Reply #139 on: June 10, 2018, 02:41:47 PM »
14.7 mm barrel OD, 3mm drop. A 5mm drop will clear, nicely, the 20mm OD of the stock barrel shroud.

Going to be an interesting week here. The new rifles are in the States, and a few are coming here. I can't wait to see the final configuration, and finalize some designs.

GTA - What's been your success with air gun target practice?