The Xisico Sentry Fan Club :)

[Norcal]

Rifle is back to doing what it does so well - snuffing varmint poontang! It sure shoots those soft Daisies with the huge hollowpoint cup well and they are devastating on impact. Thanks again for the help - now to get her .25 Sister back together and shooting!

[Back_Roads]

 
 Great to hear, I have a ton of those Daisy HP pellets, I will have to give them a try, might have to dial one of mine back a bit as it is on the hot side shooting slugs at 40 FPE, the other one may have better results with the Daisy's anyhow as I have not found a slug it likes as of yet.

[buddyb]

What kind of performance is everyone getting from their Sentry 705-9T .25? I'm a little disappointed in mine. I figured I'd get better performance.

[Back_Roads]

 Seems in the ballpark, many brands of .25 pcp guns seem to be shooting in the 800- 850 fps range, with slightly lighter pellets.

[buddyb]

I figured I should be getting 850-900 fps at least with 25.4 gr pellets and closer to the 900 fps mark.

[Madd Hatter]

What kind of performance is everyone getting from their Sentry 705-9T .25? I'm a little disappointed in mine. I figured I'd get better performance.

I'm getting just about the same out of mine. I might be getting just a little more but mine was tuned by Mike. If you want more you'll need to take it apart and hand enlarge the exhaust port of the valve. You have to be very careful when doing that as there's just not much material you can remove before runing the valve. I don't need to do that as I have a.25 Sumatra that gives me all of the power I want.

[buddyb]

Thanks Robert. I've opened the valves per Mike I was hoping for more. I think a longer barrel is in order.

A Sumatra is outstanding, I've looked at the Eagle Claw.

[Back_Roads]

 Here is a link to a place to get mags for your Sentry's .22 and .25 the .22 is 12 shot. 
https://www.gatewaytoairguns.org/GTA/index.php?topic=206991.msg156558618#msg156558618

[Sc00ter1748]

Hi All
Can anyone give advice on power adjustment on my 702 sentry as its a bit different to the manual see attached pics, i cant seem to turn the muzzle velocity adjuster it won't turn, what am I missing

[Madd Hatter]

Is your rifle cocked?

[Sc00ter1748]

Thanks for the reply ,no it's not cocked

[Back_Roads]

 Only thing I can think of is the hammer spring is maxed out, or something like a pellet got in there and jammed. I suggest you call Mike at Flying dragon air rifles, he knows everything about theses I'm sure. Ph#- 515-924-3699   Or PM him from GTA
 Come to think of it there is a screw that secures a plastic cover to the back of the valve, that may be the issue here. read up a few pages IIR this has happened 3 times including one of mine.

[avator]

Only thing I can think of is the hammer spring is maxed out, or something like a pellet got in there and jammed. I suggest you call Mike at Flying dragon air rifles, he knows everything about theses I'm sure. Ph#- 515-924-3699   Or PM him from GTA
 Come to think of it there is a screw that secures a plastic cover to the back of the valve, that may be the issue here. read up a few pages IIR this has happened 3 times including one of mine.

Yep... happened to both of mine.

[kzz1kaw]

Only thing I can think of is the hammer spring is maxed out, or something like a pellet got in there and jammed. I suggest you call Mike at Flying dragon air rifles, he knows everything about theses I'm sure. Ph#- 515-924-3699   Or PM him from GTA
 Come to think of it there is a screw that secures a plastic cover to the back of the valve, that may be the issue here. read up a few pages IIR this has happened 3 times including one of mine.

Yep... happened to both of mine.

I’m in need of some mags. Do you have a contact info so I can get some made?
Thsnks

[avator]

Only thing I can think of is the hammer spring is maxed out, or something like a pellet got in there and jammed. I suggest you call Mike at Flying dragon air rifles, he knows everything about theses I'm sure. Ph#- 515-924-3699   Or PM him from GTA
 Come to think of it there is a screw that secures a plastic cover to the back of the valve, that may be the issue here. read up a few pages IIR this has happened 3 times including one of mine.

Yep... happened to both of mine.

I’m in need of some mags. Do you have a contact info so I can get some made?
Thsnks

Yep, sure do.. Big Air Precision.com or PM Engineered (Troy) here on the forum... you'll be happy you did.

[Sc00ter1748]

Thank you for the help on this

[kzz1kaw]

Only thing I can think of is the hammer spring is maxed out, or something like a pellet got in there and jammed. I suggest you call Mike at Flying dragon air rifles, he knows everything about theses I'm sure. Ph#- 515-924-3699   Or PM him from GTA
 Come to think of it there is a screw that secures a plastic cover to the back of the valve, that may be the issue here. read up a few pages IIR this has happened 3 times including one of mine.

Yep... happened to both of mine.

I’m in need of some mags. Do you have a contact info so I can get some made?
Thsnks

Yep, sure do.. Big Air Precision.com or PM Engineered (Troy) here on the forum... you'll be happy you did.

Thank you 🙏🏾

[Norcal]

Only thing I can think of is the hammer spring is maxed out, or something like a pellet got in there and jammed. I suggest you call Mike at Flying dragon air rifles, he knows everything about theses I'm sure. Ph#- 515-924-3699   Or PM him from GTA
 Come to think of it there is a screw that secures a plastic cover to the back of the valve, that may be the issue here. read up a few pages IIR this has happened 3 times including one of mine.

Yep... happened to both of mine.

I’m in need of some mags. Do you have a contact info so I can get some made?
Thsnks

Troy's magazines are top quality plus he offers a 20% discount on orders over $200 plus free shipping.

https://www.gatewaytoairguns.org/GTA/index.php?topic=216037.msg156558709#msg156558709

[kzz1kaw]

Only thing I can think of is the hammer spring is maxed out, or something like a pellet got in there and jammed. I suggest you call Mike at Flying dragon air rifles, he knows everything about theses I'm sure. Ph#- 515-924-3699   Or PM him from GTA
 Come to think of it there is a screw that secures a plastic cover to the back of the valve, that may be the issue here. read up a few pages IIR this has happened 3 times including one of mine.

Yep... happened to both of mine.

I’m in need of some mags. Do you have a contact info so I can get some made?
Thsnks

Troy's magazines are top quality plus he offers a 20% discount on orders over $200 plus free shipping.

https://www.gatewaytoairguns.org/GTA/index.php?topic=216037.msg156558709#msg156558709

I’m looking at the website😉 will be ordering some! Many 🙏🏾 👊🏾😎

[avator]

Only thing I can think of is the hammer spring is maxed out, or something like a pellet got in there and jammed. I suggest you call Mike at Flying dragon air rifles, he knows everything about theses I'm sure. Ph#- 515-924-3699   Or PM him from GTA
 Come to think of it there is a screw that secures a plastic cover to the back of the valve, that may be the issue here. read up a few pages IIR this has happened 3 times including one of mine.

Yep... happened to both of mine.

I’m in need of some mags. Do you have a contact info so I can get some made?
Thsnks

Troy's magazines are top quality plus he offers a 20% discount on orders over $200 plus free shipping.

https://www.gatewaytoairguns.org/GTA/index.php?topic=216037.msg156558709#msg156558709

Plus they are made right here in the US.. fast delivery.
If you are looking for mags that he does not offer, contact him and chances are he can make them.