has anyone installed a regulator in there sentry's ?anyone know the ID of the airtube or the OD of the regulator ?Huma does offer one for the 702, but they give no specs on it.👋🏾 I helped huma design a regulator for the 702 couple years ago and currently have the sentry 702 in 22 40 shots avg FPS 812 es 17 sd 4 not bad 😎 loves the crosman domes out to 💯😎 I too am ordering a 705 in 22 as well😎 and ordering a huma regulator same as the 702 tube inner diameter so it should work 🤔 have a yt channel please like subscribe and ring the bell 🔔 on the 702 thanks👊🏾i contacted Mike about the difference in the tubes of the 702's and the 705's,he said the only difference is the length, so the 705 should use the same regulator as the 702.i ordered the new 705hc in .22 with the power tune & manual safety options.that new side-lever got me.......hopefully going to customize the looks and performance of the gun.thanks for this thread !!
Quote from: gendoc on December 31, 2019, 09:19:44 AMhas anyone installed a regulator in there sentry's ?anyone know the ID of the airtube or the OD of the regulator ?Huma does offer one for the 702, but they give no specs on it.👋🏾 I helped huma design a regulator for the 702 couple years ago and currently have the sentry 702 in 22 40 shots avg FPS 812 es 17 sd 4 not bad 😎 loves the crosman domes out to 💯😎 I too am ordering a 705 in 22 as well😎 and ordering a huma regulator same as the 702 tube inner diameter so it should work 🤔 have a yt channel please like subscribe and ring the bell 🔔 on the 702 thanks👊🏾i contacted Mike about the difference in the tubes of the 702's and the 705's,he said the only difference is the length, so the 705 should use the same regulator as the 702.i ordered the new 705hc in .22 with the power tune & manual safety options.that new side-lever got me.......hopefully going to customize the looks and performance of the gun.thanks for this thread !!
GuysWell, add another member to the fan club, 705-2 HC Delux in 22 cal, looks to be very nice, carbon copy of Waynes model, even down to the hole in the bottom of the stock, had it for 4 days now, haven't fired a shot thru it yet, still attempting to figure out this power wheel adjustment dial.Finally found the fill port hole, like the Idea of the rotating band to hide/cover the fill hole,lessen the chance that the very fine dust around here, will find it's way in the hole,fixed one of the magazines, end of the spring had to be bent into a tighter hook.My order from Amazon still has not shipped, it contains my scope/pellets, yes I had to try them again,to see if they have improved on the shipping methods etc.......LOL Thinking about a reg, just not sure which brand..........Don
Just jumped in with both feet on a 705, with mikes help and the advice from here, also looking for a definitive response on whether the huma reg fits the 705 or not. Not a lot of experience with modern air rifles, but lots of experience with paintball guns and center and rimfire weapons. Also if anyone had noticed, it appears that the xisicousa.com website is back up with some different items on it. ( Sorry for the all over the place, I'm just excited) any advice on pumps or compressors would be helpful, as everywhere I could get a cylinder charged is closed at the moment, and I'd rather not make too many mistakes right out of the box.
Richard it only took 2 days for my 705-9K .22 to end up on my door step, I think I ordered it early Monday morning and it was on my porch by Wednesday. When ordering from FDAR things are shipped very promptly, Mike definitely has his shipping set up about as perfect as anyone could ever ask. I'll definitely be dealing with him again, he takes his business very seriously no doubt.
Advertise Here
Share This!