The Xisico Sentry Fan Club :)

[Missed-Em]

Ok guys, you've almost talked me into it.  Being so fugly maybe I won't mind all the bumps and scraps my guns get.  Missing  few bits of info though - What's the actual weight of these rifles (I've see 9+ to 6+).  Is there more than 1 Sentry model in .25 caliber?

Sure wish Mikes page had more info!

[Norcal]

Ok guys, you've almost talked me into it.  Being so fugly maybe I won't mind all the bumps and scraps my guns get.  Missing  few bits of info though - What's the actual weight of these rifles (I've see 9+ to 6+).  Is there more than 1 Sentry model in .25 caliber?

Sure wish Mikes page had more info!

Sure wish Mike would reply to emails or return phone messages...

[drdancan]

If you follow Mike's blog he posted he has been swamped and that the supply of the 22 Sentry's he expected to last 6 months has sold out. On May 7 he shipped 11 in one day.  More expected in June. 

Ok guys, you've almost talked me into it.  Being so fugly maybe I won't mind all the bumps and scraps my guns get.  Missing  few bits of info though - What's the actual weight of these rifles (I've see 9+ to 6+).  Is there more than 1 Sentry model in .25 caliber?

Sure wish Mikes page had more info!

Sure wish Mike would reply to emails or return phone messages...

[Nvreloader]

Here is a couple of photo's of the burst disc and location on my 705-9T, 25 cal rifle.

https://ibb.co/ysdd4tZ

https://ibb.co/dWSpt8K

Don

[Leo 2018]

Recieved mine finally yesterday.  Too rainy to go out and shoot it. Can't wait to try it.

[Nvreloader]

Leo 2018

What cal did you get and what is your model number?

Thanks,
Don

[Nvreloader]

Sentry 702/705 & Xisico Sentry Models owners/users ONLY .....

Hey guys,
Would you help, provide some info about your Sentry 702/705 and Xisico Sentry PCP models of AG's,
as there is several versions/models, and provide a couple photo's if possible, so we can get some info,
in one spot.
Please copy/paste the format, with YOUR INFO..................

YR bought= month/year
Complete Model Number = 702-2, 702-3 XYZ and Caliber, long or short barrel,
Serial Number,
Type of bolt, (3 different types/styles known so far),
Standard bolt,
Rear Bolt (come out the end of the action, Marauder style),
Side Lever.
Any special notes, location of pressure gage,
end of PSI tube, bottom of stock at rear of plastic hand guard,
has automatic safety or manual safety, or Any Mods, you have done to your Sentry's.

So, I'll be the first too start:

YR bought=12/-2018
Complete Model Number = 705-2 - HC Delux -22 cal - long bbl
Serial Number, =111703304
Type of bolt= Standard bolt action style
Any special notes = Automatic safety, OEM stock, pressure gage end of psi tube,
NO burst disc in the stock/hidden under plastic hand guard etc,
has OEM factory drill hole/cutout hole. No mods done yet.

(add photo's here,) both sides of action, full length photo

https://ibb.co/VjF3nJb
https://ibb.co/gDZ9NhH
https://ibb.co/9b5HrfL
--------------------------------------------------------------------------------------------------------------------
YR bought=0/5-2020
Complete Model Number = 705-9T - HC Delux - 25 cal - long bbl
Serial Number, =112000262
Type of bolt= Side lever style
Any special notes = manual safety, OEM stock, pressure gage end of psi tube,
has burst disc bottom of stock, hidden under the rear of plastic hand guard,
(if you look real close you can see the impression in the plastic hand guard for the hole).
No mods done yet.

(add photo's here) both sides of action, full length photo,

https://ibb.co/M6x4B43
https://ibb.co/JvcYrRL

Your thoughts or suggestions.......

Thanks,
Don

[WesBob]

Sentry 702/705 & Xisico Sentry Models owners/users ONLY .....

Hey guys,
Would you help, provide some info about your Sentry 702/705 and Xisico Sentry PCP models of AG's,
as there is several versions/models, and provide a couple photo's if possible, so we can get some info,
in one spot.
Please copy/paste the format, with YOUR INFO..................

YR bought= month/year
Complete Model Number = 702-2, 702-3 XYZ and Caliber, long or short barrel,
Serial Number,
Type of bolt, (3 different types/styles known so far),
Standard bolt,
Rear Bolt (come out the end of the action, Marauder style),
Side Lever.
Any special notes, location of pressure gage,
end of PSI tube, bottom of stock at rear of plastic hand guard,
has automatic safety or manual safety, or Any Mods, you have done to your Sentry's.

So, I'll be the first too start:

YR bought=12/-2018
Complete Model Number = 705-2 - HC Delux -22 cal - long bbl
Serial Number, =111703304
Type of bolt= Standard bolt action style
Any special notes = Automatic safety, OEM stock, pressure gage end of psi tube,
NO burst disc in the stock/hidden under plastic hand guard etc,
has OEM factory drill hole/cutout hole. No mods done yet.

(add photo's here,) both sides of action, full length photo
https://ibb.co/dbjcJnP,


--------------------------------------------------------------------------------------------------------------------
YR bought=0/5-2020
Complete Model Number = 705-9T - HC Delux - 25 cal - long bbl
Serial Number, =112000262
Type of bolt= Side lever style
Any special notes = manual safety, OEM stock, pressure gage end of psi tube,
has burst disc bottom of stock, hidden under the rear of plastic hand guard,
(if you look real close you can see the impression in the plastic hand guard for the hole).
No mods done yet.

(add photo's here) both sides of action, full length photo,

--------------------------------------------------------------------------------------------------------------------

Your thoughts or suggestions.......

Thanks,
Don

The ones I have for sale here have a delrin muzzle brake, Mike made up for me as we aren't allowed silencers. Mike has my silencers and said he'd sell them. These have a shroud, Sidelever cocking and as you see in the pic, weigh 7lbs 13.3oz. Model is 705-9T
25 cal and 22 cal.
Thanks,
Wes

[Nvreloader]

Wes

Thanks you for the info,
It is my hope, that we can get a complete catalog of the differences,
between all the different styles per model etc.

Is the 705-9T models available in the 177 caliber?

Thanks again,
Don

[WesBob]

Yep I'm pretty sure anyway. I just never ordered any this time.

[Back_Roads]

Sentry 702/705 & Xisico Sentry Models owners/users ONLY .....

Hey guys,
Would you help, provide some info about your Sentry 702/705 and Xisico Sentry PCP models of AG's,
as there is several versions/models, and provide a couple photo's if possible, so we can get some info,
in one spot.
Please copy/paste the format, with YOUR INFO..................

YR bought= month/year
Complete Model Number = 702-2, 702-3 XYZ and Caliber, long or short barrel,
Serial Number,
Type of bolt, (3 different types/styles known so far),
Standard bolt,
Rear Bolt (come out the end of the action, Marauder style),
Side Lever.
Any special notes, location of pressure gage,
end of PSI tube, bottom of stock at rear of plastic hand guard,
has automatic safety or manual safety, or Any Mods, you have done to your Sentry's.

So, I'll be the first too start:

YR bought=12/-2018
Complete Model Number = 705-2 - HC Delux -22 cal - long bbl
Serial Number, =111703304
Type of bolt= Standard bolt action style
Any special notes = Automatic safety, OEM stock, pressure gage end of psi tube,
NO burst disc in the stock/hidden under plastic hand guard etc,
has OEM factory drill hole/cutout hole. No mods done yet.

(add photo's here,) both sides of action, full length photo

https://ibb.co/VjF3nJb
https://ibb.co/gDZ9NhH
https://ibb.co/9b5HrfL
--------------------------------------------------------------------------------------------------------------------
YR bought=0/5-2020
Complete Model Number = 705-9T - HC Delux - 25 cal - long bbl
Serial Number, =112000262
Type of bolt= Side lever style
Any special notes = manual safety, OEM stock, pressure gage end of psi tube,
has burst disc bottom of stock, hidden under the rear of plastic hand guard,
(if you look real close you can see the impression in the plastic hand guard for the hole).
No mods done yet.

(add photo's here) both sides of action, full length photo,

https://ibb.co/M6x4B43
https://ibb.co/JvcYrRL

Your thoughts or suggestions.......

Thanks,
Don

I will gather all the info and original boxing and paper work, and post to the appropriate places, ASAHP

[Wayne52]

In June of 2019 I received my first Sentry, it's got the gauge at the front with the fill probe and it was given to me by a factory rep(prototype) for evaluation and I have modified it with ports@3/16". It has the manual safety on it.  It also has the old polymer fore stock with the hole in it for gauge but nothing there. It's got the long barrel.



I received my first .22 Sentry Deluxe on Feb 12th 2020, it has the side lever with manual safety, it's still stock but seems to be pretty powerful for being stock.  Mine also has the burst disk as described by Don.
It's got the long barrel.

[Nvreloader]

Thanks Wayne

One more for the data base.............

I wish, I could get photo's like that, this C-ph dose not cut it.   

Don

[Back_Roads]

YR bought= month/year  - 12 / 2017
Complete Model Number - 702-3 ,Caliber .22 short barrel,
Serial Number   - 111202674
Type of bolt     -   Rear Bolt (come out the end of the action, Marauder style)
Any special notes :  location of pressure gage,  in bottom of forearm.
 Foster fill port front of tube, manual safety.   Mods - Opened TP / Barrel to .175 , Shoots slugs up to 30 gr. Not pellet picky. Though a crappy pellet will not magically become a one holler  

[Hoosier Daddy]

Wonder if my 702 is choked? I have been wanting to try slugs in SOMETHING.
 I got mine in the beginning of this very thread... but it was bought off the GTA classifieds so build date is unknown.
Rear bolt, no hash marks on power adjuster.
2nd member of F.U.G.L.Y.
Dinh was the Founding Father I believe. 

[Wayne52]

Scott I almost pulled the trigger on getting another Sentry this morning, I almost order one of the 25's in the 702 version from FDAR.   I shot a weasel this morning with my .25 Sentry (705-2).

[Hoosier Daddy]

I shot a weasel this morning with my .25 Sentry (705-2).

Did it go "POP"?

[Wayne52]

I'll be posting it in the hunting gate by the end of the day hopefully.  I want to get some more alum for tanning hides cause I've got have a dozen hides I want to tan.  I'm going to get really exacto skinning that weasel, it's the first one I've ever shot.

[Missed-Em]

Once again I ask, some one give us some data.  What's the difference between 702 .25 and 705 .25 Sentries.

[Leo 2018]

Leo 2018

What cal did you get and what is your model number?

Thanks,
Don

mine is 705-9K in .22 cal