Author Topic: Marauder Graphics (Read 26802 times))

A.K.A. Tommy Boy · « **Reply #140 on:** March 24, 2017, 05:25:48 PM »

Quote from: avator on March 24, 2017, 05:21:01 PM

LOL.... Hang on Mr. Shadow, I'll get the stock to you for painting soon...

Oh Boy...I can hardly wait to see pictures of THIS STOCK !!!

avator · « **Reply #141 on:** March 24, 2017, 05:49:44 PM »

You and me both....

Hoosier Daddy · « **Reply #142 on:** March 24, 2017, 10:34:44 PM »

"Pins and Needles"

avator · « **Reply #143 on:** March 25, 2017, 12:53:23 AM »

Last Saturday night Betty Lou and I were out on our sheltered outdoor range popping paintballs and cans with the 880s at 34yds. Several of the paintballs were left behind when I was doing the first 4 clip run from 3000 down to 2000 with SynBad today. I couldn't help but to swing my POA over and bust a few. If you ever get a chance to pop a paintball at 34yds at what I could only guess at somewhere in the neighborhood of 900 fps with a 14.3 Benji Destroyer.... take the shot. The sound of that impact is truly rewarding. It sounds like firecrackers. It's definitely louder that the hammer strike. And the juice inside becomes a mist of lime green blood spatter worthy of any alien crime scene. A sight best viewed through the scope. I'm half ways through my box of 2000 paintballs. I think I had better add them to the grocery list NOW!!!

A.K.A. Tommy Boy · « **Reply #144 on:** March 25, 2017, 01:49:24 AM »

Quote from: avator on March 25, 2017, 12:53:23 AM

Last Saturday night Betty Lou and I were out on our sheltered outdoor range popping paintballs and cans with the 880s at 34yds. Several of the paintballs were left behind when I was doing the first 4 clip run from 3000 down to 2000 with SynBad today. I couldn't help but to swing my POA over and bust a few. If you ever get a chance to pop a paintball at 34yds at what I could only guess at somewhere in the neighborhood of 900 fps with a 14.3 Benji Destroyer.... take the shot. The sound of that impact is truly rewarding. It sounds like firecrackers. It's definitely louder that the hammer strike. And the juice inside becomes a mist of lime green blood spatter worthy of any alien crime scene. A sight best viewed through the scope. I'm half ways through my box of 2000 paintballs. I think I had better add them to the grocery list NOW!!!

Sorta Like This ?

avator · « **Reply #145 on:** March 25, 2017, 02:00:13 AM »

Yep now clap your hands together really hard and blink for full affect.
How bout that? Cool wasn't it?

A.K.A. Tommy Boy · « **Reply #146 on:** March 25, 2017, 02:09:31 AM »

>> ^ <<

U-Betcha-ma-life ! VERY COOL INDEED !!

avator · « **Reply #147 on:** March 25, 2017, 01:43:48 PM »

Ok guys, first string over the chrony....
40 shots from 2900 to 2000
Benjamin Destroyers 14.3
Only stopping to swap mags.
Shot 35 was a mis load and shot 2 pellets.

avator · « **Reply #148 on:** March 25, 2017, 01:46:53 PM »

The txt. file is the actual string.
The setup up is all stock except for dropping in the TSS with stock hammer, hammer spring and shiny inner spring.
Inner spring adjuster all the way CCW and the hammers spring adjuster at flush with the end cap.

avator · « **Reply #149 on:** March 25, 2017, 01:49:38 PM »

I would think my next step would be to install the shorter hammer spring to lower the velocity and increase flatter shot count.
True?

avator · « **Reply #150 on:** March 25, 2017, 01:51:07 PM »

Has anyone used the BStaley orings with the TSS?

avator · « **Reply #151 on:** March 25, 2017, 02:27:20 PM »

Man I sure didn't want to buy a TSS,MDS and a Reg for this gun but, it's looks like I'm headed down that slippery slope don't it?
Betty Lou !!!! Where's my wallet?

Dairyboy · « **Reply #152 on:** March 25, 2017, 03:02:31 PM »

What I would do is back out the outer spring adjuster out just a little and try again. Now for the Bstately I don't think they'll work as for the TSS to work the hammer throw needs to be fully CCW which would make the Bstately pretty useless. You might be heading down the slope but that's OK alot of us have

avator · « **Reply #153 on:** March 25, 2017, 03:06:24 PM »

Thanks Dillon... I was hoping one of you guys from the Marauder forum would jump in. I'll give it a shot... This level of PCP is all new to me. My only experience has been with the FD-PCP Gen I and some Disco stuff.

triggertreat · « **Reply #154 on:** March 25, 2017, 03:30:59 PM »

Too much hammer energy and low shot count. I agree with Dairyboy to back off on the primary spring. Also, ensure there's a gap between the hammer face and poppet.

BHB mod would reduce power.

avator · « **Reply #155 on:** March 25, 2017, 03:34:22 PM »

Thanks Keith... what is the BHB? I know I've read that before.

Sfttailrdr46 · « **Reply #156 on:** March 25, 2017, 03:39:41 PM »

Woow boy that bug bit you bad . May I suggest the Gamo Swarm .22 so far nice 10 shot break barrel repeater for when yo run out of air for the Marauder

avator · « **Reply #157 on:** March 25, 2017, 03:40:43 PM »

Well silly me.... It's the BStaley.
Google is my friend.

avator · « **Reply #158 on:** March 25, 2017, 03:41:35 PM »

Quote from: sfttailrdr46 on March 25, 2017, 03:39:41 PM

Woow boy that bug bit you bad . May I suggest the Gamo Swarm .22 so far nice 10 shot break barrel repeater for when yo run out of air for the Marauder

You weren't supposed to see none of this !!!

Sfttailrdr46 · « **Reply #159 on:** March 25, 2017, 03:46:28 PM »

Quote from: avator on March 25, 2017, 03:41:35 PM

Quote from: sfttailrdr46 on March 25, 2017, 03:39:41 PM
Woow boy that bug bit you bad . May I suggest the Gamo Swarm .22 so far nice 10 shot break barrel repeater for when yo run out of air for the Marauder
You weren't supposed to see none of this !!!

Not quite up there with Thor and DEz but I don't miss too much

Thank you to our advertisers!

Marauder Graphics

Author Topic: Marauder Graphics (Read 26802 times))