Author Topic: hand pumps are now 72.00 shipped (Read 26075 times))

Bentong · « **Reply #240 on:** March 30, 2017, 07:23:21 PM »

Dang....followed your link and pumps sells now for $49.99 US seller. Good thing i don't need a back up for my back.🙏

Rob M · « **Reply #241 on:** March 30, 2017, 07:44:32 PM »

not with free shipping though??

Rob M · « **Reply #242 on:** March 30, 2017, 07:45:45 PM »

http://www.ebay.com/itm/2017-PCP-Airgun-High-Pressure-Hand-Pump-31mpa-310bar-4500psi-for-Air-Rifle-US/162449245129?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D2%26asc%3D42818%26meid%3Dd700042a861449d28187530f485e1994%26pid%3D100005%26rk%3D4%26rkt%3D6%26sd%3D371804023267

WOWOOWOWOWWW 49.99 shipped @@@@@@@@@@@@@@@@

Wayne52 · « **Reply #243 on:** March 30, 2017, 08:00:24 PM »

50 bucks ya sure can't beat that with a stick, it's the exact same thing I paid 64.95 for a couple months ago, they're a great pump too, being they're made
from stainless, they'll last indefinitely just about, all you need to do is once in a great while replace orings when they wear out, sure don't have to worry
about rust at all, there's nothing to rust on them.

avator · « **Reply #244 on:** March 30, 2017, 09:03:25 PM »

At $50 there is no reason everyone can't have 1..... or 2. I see a run of home made compressors on the rise.
Wait... wait... I'm getting a vision...... a double pumper..

lennyk · « **Reply #245 on:** March 30, 2017, 09:23:24 PM »

Yeah, gonna get another one and try rigging the wheelchair motor on 24v with low rpm pulley system

Somebody on youtube has done so.

avator · « **Reply #246 on:** March 30, 2017, 09:29:50 PM »

Yeah..... a 2 speed washing machine motor on low speed with a small pulley running a big ole wheel with a pump on either side tee'd into one reservoir. Check valve each line so they don't fight each other...... oh geez.

lennyk · « **Reply #247 on:** March 30, 2017, 09:33:00 PM »

Hi Bill,

did you run the wheelchair motor on 12v or 24v ?
Also with no further rpm reduction ?

I am gonna attempt to build one with some further rpm reduction and run it at 24v with a pair of 12v Dell power supplies in series.

Quote from: billzach on March 24, 2017, 07:18:34 PM

Quote from: Rob M on March 22, 2017, 03:55:29 PM
those are mostly 24v ,, so running it off 12 v battery is no issue, just half rpm/
..Not enough power with the wheelchair motor, so I,ll stay with my Hill pump powered by a double action air cylinder..

avator · « **Reply #248 on:** March 30, 2017, 09:53:49 PM »

Umm... I think you got me confused with someone else... I just think this crazy stuff up I don't actually do it.

Bicycleman · « **Reply #249 on:** March 30, 2017, 09:56:53 PM »

Oh, sure, Bill. You just buy the fire crackers and matches. Then you send the kids to the mayor’s house with instructions to blow up his mailbox!

avator · « **Reply #250 on:** March 30, 2017, 09:59:48 PM »

You see a problem with that?

betapotato · « **Reply #251 on:** March 30, 2017, 10:13:02 PM »

Quote from: Rob M on March 30, 2017, 07:45:45 PM

http://www.ebay.com/itm/2017-PCP-Airgun-High-Pressure-Hand-Pump-31mpa-310bar-4500psi-for-Air-Rifle-US/162449245129?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D2%26asc%3D42818%26meid%3Dd700042a861449d28187530f485e1994%26pid%3D100005%26rk%3D4%26rkt%3D6%26sd%3D371804023267

WOWOOWOWOWWW 49.99 shipped @@@@@@@@@@@@@@@@

Told ya.... They are still making some money right now. Unbelievable, right? Same deal with the compressors, if you still remember the conversion we had.

Bentong · « **Reply #252 on:** March 30, 2017, 10:39:31 PM »

If I buy a back up for the back up's back up...I might end up buying another PCP to pump..learned my lesson on the walmart/amazon UTG clone scopes, ended up buying another pcp to mount it on so it don't go to sitting lonely.

avator · « **Reply #253 on:** March 30, 2017, 10:43:32 PM »

....... yeah... maybe some dry ice to cool things down.....

billzach · « **Reply #254 on:** March 30, 2017, 11:23:09 PM »

Quote from: lennyk on March 30, 2017, 09:33:00 PM

Hi Bill,

did you run the wheelchair motor on 12v or 24v ?
Also with no further rpm reduction ?

I am gonna attempt to build one with some further rpm reduction and run it at 24v with a pair of 12v Dell power supplies in series.

Quote from: billzach on March 24, 2017, 07:18:34 PM
Quote from: Rob M on March 22, 2017, 03:55:29 PM
those are mostly 24v ,, so running it off 12 v battery is no issue, just half rpm/
..Not enough power with the wheelchair motor, so I,ll stay with my Hill pump powered by a double action air cylinder..

12 volt

Genghis · « **Reply #255 on:** March 30, 2017, 11:45:01 PM »

Do you think a firecracker could produce enough energy to detonate tannerite if you sealed it up real good inside the jar?

starlingassassin · « **Reply #256 on:** March 31, 2017, 12:05:10 AM »

Quote from: Genghis on March 30, 2017, 11:45:01 PM

Do you think a firecracker could produce enough energy to detonate tannerite if you sealed it up real good inside the jar?

only one way to find out

Brian10956 · « **Reply #257 on:** March 31, 2017, 12:15:43 AM »

I had tried one of those cheep Chinese pumps and they are garbage. They use knock off Foster fittings that won't work with the real Fosters. After giving them a bad write up on eBay they gave me a refund for updating it . I just added to my complaint that they did satisfy me by giving me a refund they also let me keep the piece of junk. I can't even get it to blow or a balloon.

Rob M · « **Reply #258 on:** March 31, 2017, 12:25:33 AM »

Quote from: Donut 2994 on March 30, 2017, 10:13:02 PM

Quote from: Rob M on March 30, 2017, 07:45:45 PM
http://www.ebay.com/itm/2017-PCP-Airgun-High-Pressure-Hand-Pump-31mpa-310bar-4500psi-for-Air-Rifle-US/162449245129?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D2%26asc%3D42818%26meid%3Dd700042a861449d28187530f485e1994%26pid%3D100005%26rk%3D4%26rkt%3D6%26sd%3D371804023267

WOWOOWOWOWWW 49.99 shipped @@@@@@@@@@@@@@@@
Told ya.... They are still making some money right now. Unbelievable, right? Same deal with the compressors, if you still remember the conversion we had.

yes ,lol.. theyre likely making them for 10 dollars each at this point

Rob M · « **Reply #259 on:** March 31, 2017, 12:29:12 AM »

BILL, i dont think they will fight each other since the pickup is not tied into the high pressure end.. a basic manifold with 2 inlets and 1 output ( as seen on youtube ) would do the trick. pretty cheap too

Thank you to our advertisers!

hand pumps are now 72.00 shipped

Author Topic: hand pumps are now 72.00 shipped (Read 26075 times))