Thank you to our advertisers!
Breech Block O-Rings For the IZH46M
Select Gate
READ GTA FORUM RULES BEFORE POSTING
Welcome New Members
GTA Forum Help Desk
GTA Announcement Gate
Airgun Legislation Actions/Information
Boss's Corner
Dealer Area
GRiP "Gateway to Airguns Review Program"
Airgun Repository of Knowledge
Airgun Content Creator Videos
Airgun Event Videos
Air Arms Airguns
AirForce Airguns
Air Venturi Airguns
Artemis/SPA Airguns
Barra Airguns
Beeman Airguns
Benjamin Airguns
Cometa Airguns
Crosman Airguns
Daisy Airguns
Daystate Airguns
Diana Airguns
Evanix Airguns
FX Airguns
Feinwerkbau
Gamo Airguns
Hatsan Airguns
JTS Airguns
Macavity Arms Airguns
Pinty Airguns
Umarex Airguns
Vintage Air Gun Gate
Weihrauch Airguns
Support Equipment For PCP/HPA/CO2
All Air Gun Accessories Gate
3D printing and files
Optics, Range estimation & related subjects
Scopes And Optics Gate
Tuners
In Memoriam
GTA Contributing Members
Air Gun Gate
BB Guns and Such
"Bob and Lloyds Workshop"
American/U.S. Air Gun Gates
European/Asian Air Gun Gates
PCP/CO2/HPA Air Gun Gates "The Darkside"
Projectiles
Air Archery
Air Guns And Related Accessories Review Gates
Hunting Gate
Machine Shop Talk & AG Parts Machining
***Pay It Forward***
Buyer's, Seller's & Trader's Comments
Bargain Gate
Back Room
Member Classifieds Gate
Hobbyist Classifieds Gate
Target Shooting Discussion Gate
Target Match Rules
Shooting Match Gates
Field Target Gates
The Long Range Club
100 Yard Match
Discussions By States
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email
?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
About
Help
Old GTA
Gallery
Search
Stats
Login
Register
Advertise Here
GTA
»
All Springer/NP/PCP Air Gun Discussion General
»
European/Asian Air Gun Gates
»
Czech & Russian Air Guns
(Moderators:
Rocker1
,
ezman604
) »
Breech Block O-Rings For the IZH46M
« previous
next »
Print
Pages: [
1
]
Go Down
Share This!
Author
Topic: Breech Block O-Rings For the IZH46M (Read 2066 times))
Frank in Fairfield
"Good judgement comes from experience, and a lot of that comes from bad judgement."
GTA Senior Contributor
Posts: 7301
Real Name: Frank
Breech Block O-Rings For the IZH46M
«
on:
June 10, 2016, 09:26:01 PM »
You know who you are.
You IZZY owners.
If you haven't lost the o-rungs yet, you will.
Forget to close the breech and touch one off and one or more will go flying...
Inova (I think that is how you spell their name) used to have them in a 10-pack.
No more.
PA has them and recently I needed to add something to an order to get free shipping so I had them add two.
PA used to sell them in a zip-lock with their own part number but this time....
PA shipped them and they came in an envelope from the manufacturer, a source right here in the USA.
IZZY owners should copy this label for future use when PA says they may not have any in stock.
"""On the bottom of the label there is indicated the exact size of these o-rings."""
EAA Sport in Florida has them too.
Rumor has it that the import restrictions on Russian items may be coming to an end so the IZH46M will soon be available again.
Note:
I would appreciate it someone would post this information to the Yellow Forum.
Steve won't let me post....again!!!! 😈
Thanks
Logged
Fairfield, CA, USA
AA TX200, .177 (3)
Avanti 499b
Baikal IZH46M (not working)
Baikal IZH60
Beeman P17
Beeman R1, .177
Benjamin PRod
Crosman 2240XL
Crosman 2300S
Crosman DPMS SBR
Daisy Model 25, Variant 15
FWB 601
Sheridan (Crosman) C9a
Weihrauch HW35e, .177
terry mc
Plinker
Posts: 131
yes
Real Name: Terry
Re: Breech Block O-Rings For the IZH46M
«
Reply #1 on:
June 17, 2016, 07:23:13 PM »
Good information.
I had a friend not fully close the breech on my MP-532 last weekend(same guts as IZH46M)
naturally both seals blew out.
Luckily we found one and I had a spare seal kit.
But that only leaves me one if it happens again.
Logged
PHOENIX arizona
RAW .30 LRT Pepper laminate with Hawke 10-50x60 ED
RAW .22 Sporter Pepper laminate with Hawke 10-50 ED
AA Prosport in .22
IZH-46 with my grip work.
Frank in Fairfield
"Good judgement comes from experience, and a lot of that comes from bad judgement."
GTA Senior Contributor
Posts: 7301
Real Name: Frank
Re: Breech Block O-Rings For the IZH46M
«
Reply #2 on:
June 18, 2016, 09:45:27 AM »
About $10.00 for two from PA.
EAA has a kit that includes piston seal.
I think Timmy Mac has them as well.
In my experience, if you have the spares, you will never (maybe) need them.
When I bought my R1 in 1984, Doc Beeman talked me into buying a "spares" kit.
Piston seal, breech seal, spring.
I finally tired of looking at them on my bench and Motorhead put them in for me a couple of years ago.
The spring (new?) was less powerful than the 30 year old one so a VORTEC kit went in.
Like I said there was a company in Southern California that sold the o-rings for the IZZY.
10 for $18.00.
I had another IZZY a few years ago so I ordered 10 from them.
I gave five to my partner in KS and when I sold my 1st IZZY, I threw them into the package.
I should have kept them.
I do not think that company in SoCal sells them anymore as they are not the company website.
This company has them too:
http://www.airgunwarehouseinc.com/izhbame.html
«
Last Edit: June 18, 2016, 09:50:09 AM by BarnyDaddy
»
Logged
Fairfield, CA, USA
AA TX200, .177 (3)
Avanti 499b
Baikal IZH46M (not working)
Baikal IZH60
Beeman P17
Beeman R1, .177
Benjamin PRod
Crosman 2240XL
Crosman 2300S
Crosman DPMS SBR
Daisy Model 25, Variant 15
FWB 601
Sheridan (Crosman) C9a
Weihrauch HW35e, .177
Print
Pages: [
1
]
Go Up
« previous
next »
GTA
»
All Springer/NP/PCP Air Gun Discussion General
»
European/Asian Air Gun Gates
»
Czech & Russian Air Guns
(Moderators:
Rocker1
,
ezman604
) »
Breech Block O-Rings For the IZH46M