Author Topic: 9mm RS2 9MM BULLDOG (Read 6159 times))

WHITEFANG · « **on:** June 07, 2015, 02:27:52 PM »

Well guys I am back into projects for the pcps.
Latest Evanix RS2 9mm is getting a new dress.
Here are some pics of the start and now in the final stages of finishing the wood.

http://i1326.photobucket.com/albums/u643/FANG59LOBO/P1000487_zps7ade447d.jpg

http://s1326.photobucket.com/user/FANG59LOBO/media/20150606_161541_zpsd68ee4d7.jpg.html?sort=3&o=0
This stock was an early version of the marauder. The wood was a thick like plywood material. Not easy to wood rasp.
panted black now for the final block sanding and curves.
Looking like it may be a black stock right now. Scope and trigger is the same aluminum block pictured in yhe start pics but yes modded for the RS.
THE old bullpup stock I had at the first has been fitted for the RS a while back. The wood on it is a super solf wood that cracked many times while working. It still is now project # 2. With some work it is coming on fine and vould be the new Windy City bullpup?
Yes playing once again. Now loving the power and accuracy of the RS2 9MM and for sure the RAW 1000X 9MM REGULATED.
THANKS ALL!!

FANG
JUNKYARD AIRGUN'S

Nomadic Pirate · « **Reply #1 on:** June 07, 2015, 05:39:31 PM »

Can't wait to see the final product,
........the Storm .357 is not a High End gun by any means but it sure is a great value for 900 bucks IMO

Nomadic Pirate · « **Reply #2 on:** June 07, 2015, 06:32:52 PM »

Cricket, RAW, DaveG the new Slayer, and I might be forgetting some since I don't look at High End guns

WHITEFANG · « **Reply #3 on:** June 07, 2015, 08:55:38 PM »

Can't go wrong with the RAW. MARTIN x Theoben builder. Any Az Theoben is a high end gun. Money well spent. Proven guns in many forms to order on the RAW and work done by AZ. Barrel leghth, stock, regulated, ldc,full shroud. Trigger set up and the list grows long.

WHITEFANG · « **Reply #4 on:** June 10, 2015, 01:25:02 PM »

BASIC HM1000 +-$1600
BASIC HM1000X +-$1900
All just depends on your choices. Comes with 1 mag. O ring rrbuild kit and foster fitting. Quick fill v gauge set up.

Fang
JUNKYARD AIRGUN'S

Nomadic Pirate · « **Reply #5 on:** June 10, 2015, 03:14:18 PM »

Quote from: tsakula on June 10, 2015, 01:18:23 PM

cricket is not more than 25. or am i wrong?

I'm afraid you are wrong

....the cricket indeed has a 9mm/.357 model, I shot that gun too a friend of mine has it.

Airgunhunter73 · « **Reply #6 on:** June 10, 2015, 04:58:59 PM »

Hey Fang glad to see your back to modifying things again, keep us updated Brother looking forward to seeing the finished product

WHITEFANG · « **Reply #7 on:** June 10, 2015, 05:00:09 PM »

Missed that part?
I read it as price not caliber. Yes indeed they do make a 9mm criket. $1742.95 Top Air Gun.

WHITEFANG · « **Reply #8 on:** June 10, 2015, 05:03:13 PM »

Thanks!! Had to go back to some shop work to get my mind off the real job!!👍 Real job pays for the fun but is starting to get the best of me! 😖

FANG
JUNKYARD AIRGUN'S

WHITEFANG · « **Reply #9 on:** June 13, 2015, 06:15:02 PM »

Any one intersest I have many days in this project. Comming along great. I will link.this due to pictures and days for those interseste. DAVE: HOPE THIS IS ALRIGHT? THE link is today. If interested you can back it up to the first.
I took a early model gen1 bullpup stock. Did my thing to it. Fitted it to the RS 2 .
Almost done.
The best thing that interested me is the grainer kit I got.
If not for the fiber strain bondo the plywood super thick had a great laminated look.
I played on the cardboard and for a beginner I see much use of the tooling once masterd. Not the real thing. But would full ya. Seen much use of this tool in person. Feels as a grain but end finish appears as wood.

http://www.network54.com/Forum/747212/message/1434228936/Grainer+tool+play

FANG
JYAG'S

WHITEFANG · « **Reply #10 on:** June 27, 2015, 08:44:45 PM »

Almost done. Fitted and stock work done.
lacking the trigger set up. Got the hardware but just got to make some adjustments for it to fit. Should not be bad at all.
Remember this was the one of the early bullpup marauder stocks.
Total make over http://i1326.photobucket.com/albums/u643/FANG59LOBO/1435447772272-2020562271_zps2775cbe6.jpg
More pics on the photo bucket. And a link to all the start to finish.

http://www.network54.com/Forum/747212/thread/1434217128/last-1435448153/Weekend+of+shooting+and+NEW+RS2+9MM+BULLDOG+STOCK+PROJECT
Thanks++
FANG
JUNKYARD AIRGUN'S

oldpro · « **Reply #11 on:** June 28, 2015, 03:13:55 AM »

You can turn them out my friend. I dig your sponge paint scheme it looks real good in the desert camo. Hope the wife is feeling better. Keep up the good work, I always enjoy your make overs.

WHITEFANG · « **Reply #12 on:** June 29, 2015, 03:56:24 PM »

Thanks oldpro very much. Took the time to work the pictures so to be able to post them without anyone having to chase them down.
Still working the trigger hardware. The big rod setup was too much for the stock new config of the RS2 placing of the tube and receiver. Got the thing working super till the stock was installed?

Still working on it and taking another approach.
Here is some pics. One you will see the WAR Bullpup (WICKED AIR fully modded Marauder.25) on the left and the RS2 Bulldog on the right.

THANKS

FANG JUNKYARDAIRGUN'S

WHITEFANG · « **Reply #13 on:** June 30, 2015, 10:27:21 PM »

Got to say after all the work it paid off. Got the trigger straight.
Looked up bullpup trigger set ups this morning. After looking I realized I was working the trigger set on the left sid of the gun? No wonder it would not work with the stock on😨
Trigger set is now better than it was in the factory state. So far the gun is hitting the bull at 30 yeard. Inly issue I have with the gun now is the scope sets super high off the barrel. I got some super low mounts comming with a restock on lead.
On this project used the Evanix fluted ldc shroud. Cut the Evanix ldc off. The ldc is lightly welded on but it is threaded on and glued prior to the light solder or what ever it was. Ising the WOLF AIR LDC. Seems to work great even for a backyard. More gun action and ping than muzzle sound.

The gun is nose heavy now but thats ok. Great feel of the BULLDOG stock.

FANG
JUNKYARD AIRGUN'S

Nomadic Pirate · « **Reply #14 on:** June 30, 2015, 10:52:42 PM »

Cool project Fang.

WHITEFANG · « **Reply #15 on:** July 01, 2015, 12:13:10 AM »

Thanks MANNY!!
GOT to say it turned out great. Shoots great and has a very good feel in the hand and in the shoulder. Just a bit nose heavy but go figure. Got some super low mounts to lower the 4-16x44 30mm utg SW. Might be doing an electric trigger setup later on it. Just a thought.
Ordered some of the Bayou Bullets? He is sending several different od sizes to try. RS 2 testing only. No Raw.

Airgunhunter73 · « **Reply #16 on:** July 01, 2015, 10:21:17 AM »

Very nice build there Fang, really like your sponge camo job, if you decide to go with a electric trigger I can send pics of my Prod trigger it runs off of 2 9volt batteries.

WHITEFANG · « **Reply #17 on:** July 01, 2015, 11:43:42 AM »

Yes please! Thanks!! I really like the sponge stock work. As 8n my other
ocb.jr@sbcglobal.net camo work the multiple colors give the stock some texture. In a 3 or more color the stock will take on different color looks at different angles. As like a flip flop paint job. Been camoimg everything since 1974. Boats, brand new OB motors and trucks. Plus many PBs and air guns.
Love to look at your trigger set up.

FANG

JUNKYARD AIRGUN'S

WHITEFANG · « **Reply #18 on:** July 11, 2015, 04:00:05 PM »

Still waiting on the trigger set up?
But I have to say this project has proven a great makeover.Not had time to stretch it out? New scope, super low mounts and now I just had to throw some od green on the dress. So many colors of OD. This is the lighter more green not the dark.
The gun is a laser. Scope is almost on the plane of the WOLF air LDC.
Next project is the PP upgrades.
lol
http://i1326.photobucket.com/albums/u643/FANG59LOBO/20150711_094600_zps53d50625.jpg

FANG
JUNKYARD AIRGUN'S

Nomadic Pirate · « **Reply #19 on:** July 11, 2015, 04:08:46 PM »

Good work Fang

Thank you to our advertisers!

9mm RS2 9MM BULLDOG

Author Topic: 9mm RS2 9MM BULLDOG (Read 6159 times))

Nomadic Pirate

Nomadic Pirate

Nomadic Pirate

Nomadic Pirate

Nomadic Pirate