HW95 stock crews and screw cups

[hoffy43]

Hey gang, sorry it’s been a so long since I have been iactive with posts, however I do listen in quite often and you all are great. I was hoping someone here could steer me in the right direction to buy some cup screws for my HW95 stock. I'd like them to be black like the original and could use the screws as well as the caps. I just ordered a pg2 kit and wanted to install them when I re assemble the gun. If this post is better suited for another forum, I apologize to the moderator. Thanks

[bgmcgee]

http://www.mac1airgunshop.com/mobile/Product.aspx?ProductCode=MCupKit
Not sure if these are what you are looking for.

[hoffy43]

That would get-er done. I was hoping to get the cups black as well. could paint them i guess, not sure how well it would hold up though. Thanks for the quick response

[nytebyte]

I have the Mac 1 on 2 of my HW's and so far so good. Have not come loose.

[Slavia]

Birchwood Casey sells brass and aluminum black if the color is an issue.  I make my own screw cups from spent pistol cases.  There is usually an abundance of both aluminum and brass, and .380/.38/.357/9mm/.40/.45 covers most of the sizes I might need.

[hoffy43]

Great idea Slavia. I was looking at some 9mm spent cases last night and considering that possibility. What do you do to size the depth, sand the casing? Thanks for the feed back everyone

[hoffy43]

Looks like the 9mm casing is a perfect fit in diameter, but the OEM screw head diameter is to large. I'll stop at the hardware store tomorrow and see if they have a fix. Thinking an Allen rather then slotted screw would be a better choice for me.