Bipod for benjamin discovery

[testedhorse368]

Hi I was wondering if there was any bipods that were compatible with the benjamin discovery. I don't have much in the way of tools to mount a swivel stud.
Thanks!

[hwood71]

I drilled the stock and used the screw in studs. Standard bipod works great.

[Mod90]

I recently ordered a Caldwell XLA Pivot bipod 9-13 for my AT44. It should be here by Monday, I intend to review it & post it in the review gate.

[Eddie B]

Went to Wally World and bought a bi pod and swivel studs.  After watching a youtube video, the studs were installed and looks great.  Do you have a drill, drill bits and masking tape?

[Mod90]

Masking tape?

[Eddie B]

Masking tape?

Yep.  Place a strip of masking tape where the stock is to be drilled.  Tap a small hole w/nail where you want to drill.  Use a small drill bit for initial drilling then use a bigger bit to finish.  This method prevents "boogering" up the wood stock.

[Mod90]

Oh, ok

Well mine is going on a synthetic stock that's plenty"boogered" already  That gun has seen a lot of field time, & has some scars to prove it.
Besides, if it's one thing I do is work neat/precise.
Always measure 10 times & cut slowly once, than to measure once, & cut 10 times