benjamin trail np all weather 22 cal

[torence20]

i find my stock to fit quite well how it is set up, it i ssomething to think about tho

[torence20]

so a little update guys i got my rws scope in the mail today but it seems i forgot to order a mount...oops and for the life of me i cannot find a one piece 4 screw mount that will fit the 30mm tube and go on a weaver rail. so i guess ill start there with a question, im assuming its a weaver rail that the benji trail comes with it looks like it anyways but im by no means an expert so i guess i should figure that out first. and if anyone has a scope with a 30 mm tube and a one piece please point me to where you got it thanks! also got my new pellets today so i have some shooting i need to do! thanks

[2nd RCHA]

I would try going up in "head-size" 'til you get the groupings you want, I had some issues with my 'Trail, and they dissapeared when I went up to 5.54-5.55mm in H&N Field Target Trophies, You may want to try H&N Baracudas/Match, but they only go up to 5.53mm, which may be all you need. My 'Trail's a "tack-driver" when paired with either of those rounds, and I mean "One-Ragged-Hole" groupings at 25meters(82ft),,,or try JSB pellets w/ a h/s of 5.52mm, what they lack in h/s they make up for by having very thin skirts, which really grab your barrels "land's&grooves". Hope this helps. Cheer's, Andy.

[mobilehomer]

With the weaver/picatinny mount you don't really need a one piece. Try Gander Mt., Dick's or Bass Pro. These are somewhat close to you.

[torence20]

thanks for the advice andy i have recieved some h&n field ammo of the same size you had said so i guess before i pull the scope off i should try shooting it, and i thought a one piece would be they way to go but i have yet to find it so i guess two piece rings will do just fine.

[HYspd]

adjust the barrel pivot bolt..it shoot 10x times better

[torence20]

hyspd what am i adjusting with the pivot bolt? the lock up?