Leaky Disco..

[JrSquirreler]

MustangMike, can you lead me into the direction of a Tear-Down guide? Also, Degas the Disco first right?

[MustangMike]

any time you working on a pcp play it safe and degas it


there really is no guide, its that simple

degass
remove stock
remove trigger group
remove front fill adapter
remove breech/barrel as one
using a small diameter pvc or small enough dowl with a hole in it for the valve stem plug, tap the from the rear of the tifle the valve and gauge block out.. they will slide all the way up and out the front of the airtube..
watch for the orings as they slide over the gauge port hole in the tube


i lknow it looks like a of work but seriously there is about 10 parts that make a disco, just work slow, lay your parts out in the order they come off in and take pictures of each part before removing it

[stacycfi]

Today I degassed and took down the fill adapter.
There was corrosion on the check valve where the
o-ring seats.  I used some scotch bright and cleaned
her up.  Holds pressure fine now.

There was no visible moisture in the tube so does anyone
use desiccant when filling or some other moisture removing
device?