Anybody have hard chrony numbers on mod 95 or mod 125 in .22?

[microsalmo]

Looking for good data of what these guns settle into after break in. Thanks, Steve

[Lambchops]

I've seen plenty throughout two months. Do a quick search.

[Paul68]

I'll have 125 numbers for ya sometime between the 22nd and the 25th. F1 will arrive around then

[microsalmo]

I did a search last night. It was pretty lame. Found 3-4 threads that made mention of what numbers were, but nobody posted any printouts.

Paul, Im counting on you. I want a chrony printout posted, none of this transcribed bologna!    Or at least the whole 10 shot string transcribed.

[Lambchops]

Steve, I have chrony numbers for my .25 WFH, if that helps.

[Paul68]

I haven't ordered the printer. I'm doing ok but I dang sure aint rich Printer costs bout as much as the chrony. No worries, I'll get numbers with several different pellets

[microsalmo]

Steve, I have chrony numbers for my .25 WFH, if that helps.

Thank you - all good on the .25 cal.  I'm really curious about that .22 for some reason.  Thanks again.

[microsalmo]

I haven't ordered the printer. I'm doing ok but I dang sure aint rich Printer costs bout as much as the chrony. No worries, I'll get numbers with several different pellets

Thank you Paul. - a 10 shot string transcribed would be just as good..

[Smackey54]

Looking for good data of what these guns settle into after break in. Thanks, Steve

This is what I got with mine after a cylinder hone, piston polish, deburr, polish, lube:

Shot       Grains   Velocity   FPE
1                 14.5   819   21.60188899
2                14.5   821.2   21.71809897
3                14.5   818.8   21.59133991
4                14.5   822.4   21.78161763
5                14.5   821.7   21.7445538
6                14.5   820.4   21.67580473
7                14.5   820.9   21.7022338
8                14.5   819.9   21.64939176
9                14.5   821.5   21.73396994
10                14.5   820.7   21.69166024
     Average      820.65     21.68901725
     Min                   818.8   21.59133991
     Max                   822.4   21.78161763
     Spread                   3.6   0.190277719

Hope this helps...
Mark

[Paul68]

Gun has around 300-350 shots through it. JM seal, steel tophat, hone, debur, light spring tar, lube. It hit 30FPE, and I am hoping things tighten a bit with break in. I think the oddball low numbers are due to pellet issues ie inconsistent size, non-uniform skirts. I'm thinking if this AG don't have any more issues, it will settle in about 28 FPE.

Sniper 125- 22 cal- CPDH 14.3 gr
1.   943.1
2.   942.3
3.   945.1
4.   940.4
5.   944.2
6.   954.6
7.   956.0
8.   947.5
9.   939.4
10.   916.5
High 956.0 Low 916.5
Avg-943 FPS
28.2 FPE

 H/N Barracuda 21.14 gr
1.   766.1
2.   760.7
3.   752.6
4.   764.4
5.   780.2
6.   751.5
7.   761.1
8.   778.7
9.   760.3
10.   767.4
High 780.2 Low 751.5
Avg-764.3
27 Fpe

[microsalmo]

Look who got his chronograph!  Bad to the bone. Thanks Paul.

[microsalmo]

Test some more pellets! What kind of standard deviations are you seeing?

[microsalmo]

Thanks Smackey54!!

[Paul68]

  I need to order some more Crow Mags and a few new types to try. I still haven't found "THE" pellet for this gun. I didnt even bother with the JSB's, Beeman FTS or CPHPS. Just not enough difference and none of em shoots well at all out of the gun. At this point, I can say it does like a tight fitting pellet. I plan on chamfering the loading port to ease the pellets in better since jamming em in is probably damaging their sides.

[Smackey54]

Sorry...forgot to mention that those speeds are with Dynamit Noble Super Hollow Points, which my 95 likes very well.

Here are pictures of the pellets...and the 15 yard target. Scattering around the center are me sighting it in. The enlarged hole on the right is a 5 shot group after getting the scope zeroed.

Mark