RWS Diana p5 magnum

[Moveback]

I let someone use my P5 and they lost the nut that goes on the cross bolt for the barrel swivel. I have checked all metrics and American thread type, but can't, find a match? Do you think it may be a British thread? Where can I get parts for this gun?  It is an older model.

Thanks

[daveshoot]

Check Chambers, maybe you can get the size from their diagrams and find one locally. If not, order from them.

http://www.gunspares.co.uk/shopdisplaycategories.asp?id=24035&cat=Diana%2FOriginal

Not sure if this is yours, but it's a start:

[SAADE]

It should be metric however, the thread count (threads per inch in the U.S.) maybe 40 or more, this is common on U.S. firearms, even 46 tpi on some older U.S. guns.
So, unless you have a "special" diameter (non-std) the diameter is not the issue, it is the thread count.

As a standard, threads in the U.S. are counted per inch, metric are counted in millimeters of thread... pull the bolt out and count the threads here's a link to a chart hope it helps   http://www.boltdepot.com/fastener-information/Printable-Tools/US-and-Metric-Thread-Sizes.pdf

PS Are you sure that the "nut" that is missing is not an insert type or locking nut?

[robert w]

get with umarex use the parts digram and give them the number of the part they will help you

[robert w]

i looked at my diana 5g and the nut your looking for has a shoulder that goes in the frame to center it ,looks like it is a special order .at least mine is that way so i belive i'd get with umarex and get 1 but remember umarex is slow like snail mail . good luck

[Moveback]

Thanks Robert:
I looked at mine today and am wondering if the bolt that is in it is the wrong to start with? I checked out all the other internet diagram sights mentioned and none match what I have. I looked at the box it came in and it says mod. 5M then the serial number it matches the gun, but the gun says P5 magnum. I will contact umarex next. Thanks everyone for your help
 Moveback

[robert w]

any time move back if i have what is needed i dont mind looking as i might be the next person in need . i have some parts coming from umarex in the next few days . my diana 34 in .177 has a couple of screws that have lost their threads so i went to lowes and found some but they are stainless steel hard to blue so i ordered some from umerax so it dont look cobbled up i just cant stand a cobbled up looking machine of any kind cars,trucks ,guns it just isnt right but hope you get the needed parts . i realy love shootin my diana 5 she hits hard n true hope yours is the same