Crosman 3622 pcp

[desertplinker]

I have a Crosman 3622 with steel breech installed. Apologize if this has been discussed before. Is the GravMag the only option for a pellet magazine, I have the GravMag, not installed, watched the video, thing looks funky and fussy, would like another option. TIA

[Rick67]

I have a Crosman 3622 with steel breech installed. Apologize if this has been discussed before. Is the GravMag the only option for a pellet magazine, I have the GravMag, not installed, watched the video, thing looks funky and fussy, would like another option. TIA

Been looking at the Rowan Universal Mag System, but it’s not cheap:

https://rowanengineering.com/products/10017001?_pos=1&_sid=9dcf0e362&_ss=r


The only thing that’s a bit off is the breech ledge vs the pellet probe height, although I’m pretty that could be remedied by shimming it with a thin plate the thickness of a cutter blade; it’s the one that says 3mm for .22 and 2.5mm for .177….

The GravMag has never appealed to me.

[Rick67]

I have a Crosman 3622 with steel breech installed. Apologize if this has been discussed before. Is the GravMag the only option for a pellet magazine, I have the GravMag, not installed, watched the video, thing looks funky and fussy, would like another option. TIA

Been looking at the Rowan Universal Mag System, but it’s not cheap:

https://rowanengineering.com/products/10017001?_pos=1&_sid=9dcf0e362&_ss=r


The only thing that’s a bit off is the breech ledge vs the pellet probe height, although I’m pretty that could be remedied by shimming it with a thin plate the thickness of a cutter blade; it’s the one that says 3mm for .22 and 2.5mm for .177….

The GravMag has never appealed to me.

It would actually work with a .22 probe.

It says MAX of 3mm, and I’m measuring mine at 2.87mm with an OEM Crosman breech and a Baker Airguns .22 probe from his aluminum breech.

The Don Cothran breech has a lower ledge and measures 3.429mm, but it would work with a shim.

Anyway, I’m not really a magazine person 🍻

[desertplinker]

I have a Crosman 3622 with steel breech installed. Apologize if this has been discussed before. Is the GravMag the only option for a pellet magazine, I have the GravMag, not installed, watched the video, thing looks funky and fussy, would like another option. TIA

Been looking at the Rowan Universal Mag System, but it’s not cheap:

https://rowanengineering.com/products/10017001?_pos=1&_sid=9dcf0e362&_ss=r


The only thing that’s a bit off is the breech ledge vs the pellet probe height, although I’m pretty that could be remedied by shimming it with a thin plate the thickness of a cutter blade; it’s the one that says 3mm for .22 and 2.5mm for .177….

The GravMag has never appealed to me.

It would actually work with a .22 probe.

It says MAX of 3mm, and I’m measuring mine at 2.87mm with an OEM Crosman breech and a Baker Airguns .22 probe from his aluminum breech.

The Don Cothran breech has a lower ledge and measures 3.429mm, but it would work with a shim.

Anyway, I’m not really a magazine person 🍻

Thanks for the Rowan link. Looks interesting for sure

[Rick67]

Rowan makes very high end parts.

I’m getting a setback trigger from them.

They’re not exactly cheap and shipping is abrasive as well 

[desertplinker]

the Rowan magazine looks really cool, too much coin for me however.

[tennx]

 Zero issues with the gravmag on my 3622….good luck on your choice….