Opportunity for a **FREE** HUMA Regulator for a Benjamin Cayden

[Gear_Junkie]

HUMA-AIR is offering an opportunity to get a free HUMA Regulator for a Benjamin Cayden.  They just need someone with a rifle in hand to provide some information and accurate measurements (using precision instruments and not eyeballing them with a ruler).  If you are interested in this opportunity, please contact Marc at:  Info@huma-air.com .

This is a first-come first-served offer.

Thanks!

[TroyHammer]

Just supplied Huma with all measurements and pictures of the block. shouldn't take long as it's just a Kral Puncher Breaker reg with different threads.

[Gear_Junkie]

Just supplied Huma with all measurements and pictures of the block. shouldn't take long as it's just a Kral Puncher Breaker reg with different threads.

That's great news, thank you for doing this!  I've been holding off on getting a Cayden until a HUMA is available.

[TroyHammer]

Just supplied Huma with all measurements and pictures of the block. shouldn't take long as it's just a Kral Puncher Breaker reg with different threads.

That's great news, thank you for doing this!  I've been holding off on getting a Cayden until a HUMA is available.

Pair the reg with a twin spring debounce hammer and the results should be amazing. Polish the barrel bore and no other changes should be necessary.

[Gear_Junkie]

Just supplied Huma with all measurements and pictures of the block. shouldn't take long as it's just a Kral Puncher Breaker reg with different threads.

That's great news, thank you for doing this!  I've been holding off on getting a Cayden until a HUMA is available.

Pair the reg with a twin spring debounce hammer and the results should be amazing. Polish the barrel bore and no other changes should be necessary.

Thanks again Troy.  Have you done a writeup on a TSS for the Cayden?  Or do you have a part number for the inner spring?  I haven't even seen the innards of this rifle yet, except for the trigger sears which look like well made parts.  I'm hoping to polish them and get an 8 - 12oz clean break.  That, with a HUMA and TSS would make this one sweet rig!