New .20 Caliber Pellets!

[Hoosier Daddy]

Mark... Maybe a Stoopid question...Who makes the 11.42?
I am away from my JSB and Benjiman tins.
 I just received my H&N .20's

[Mark 611]

H&N FTT

[Hoosier Daddy]

I need to get home to see what I bought. But I think that was the ones.

[Mark 611]

They look like this!
https://images.airgundepot.com/ay/airgundepot/h-n-field-target-trophy-20-cal-11-42-grains-domed-500ct-14.gif

[WHITEFANG]

The 48/52 barrel removal can be done an still have the removed barrel unharmed. Same goes in the 460 which make another fine Magnum . 20.
The only critical removal of the barrel is having to go down through the receiver to remove the barrel.
1 slip up and the receiver can be damaged. But with barrel removals there are always safe guard tricks. It's not a cheap transition. Barrel alone is $140 +- in a blank.
You have lathe time, barrel removal and install plus the tear down and rebuild costs.
The breech nipple is not that big of a deal other than getting you nipple lenght correct. I never had time shim a breech seal or remove a barrel to correct the over lenght nipple. But I have the tooling to cut the nipple lenght down if to long.  Never had to use it.

These platforms make super nice LW . 20 RIFLES. JMO 💀 LOVED MY 48 .20. It's somewhere out there as some of my other rebarrels.

Here it was in a Howy's custom build Ash stock with  rose wood inlays.

[Hoosier Daddy]

They look like this!
https://images.airgundepot.com/ay/airgundepot/h-n-field-target-trophy-20-cal-11-42-grains-domed-500ct-14.gif

Yep... Just got home and checked.
I got a thousand of them.
Litterally.