1377 American classic, HELP!

[maraudinglizard]

Travis, I have a rear cocker 1377 that I rebuilt a while back. All you have to do is replace the breach, barrel, and piston. I am still using the same hammer. I went flat top with mine and there are other valve and piston options as well. All my parts came from www.alchemyairwerks.com. David Grimes is the owner and a great guy to deal with.

https://www.ebay.com/sch/m.html?_ssn=needfulthings-2019&LH_PrefLoc=&_from=R40&_trksid=p2499338.m570.l1313.TR11.TRC1.A0.H0.X1377.TRS0&_nkw=1377&_sacat=0

https://www.gatewaytoairguns.org/GTA/index.php?topic=83670.msg802677#msg802677

[fatmike]

Crosman bugout kit at pyramyd air  is 79$. For what you will spent this option puts you ahead.

[xtred1]

Go to the custom shop you will save money.

[HYspd]

hmmm disco and 22xx are same diameter


gently clean that beauty ....then...


my experience and credit cards say buy a crosman custom kt1300 with a long breech for shooting...i have one i pieced together myself with something like $700 in it....but it shoots beautifully

uhhh lemme see 14"LW barrel $100, long steel breech $50, P-rod trigger group and fluted hammer $135, flat face piston and high flow valve $100, long barrel band and solid pin $25, extended prode and Disco handle $40, upgraded screws $10....MINS LPA rear sight and basic front blade $45, heavy duty pump arm i forget how much...all  plus shipping from 4 suppliers and the cost of the basic pistol.....pretty much just used the stock tube and the furniture by the time i was done with it.....

you'll be much farther ahead money wise

[xiholdtruex]

I wad calculating what was worth investing in. After looking at the shape your pistol is in I think you would save money just saving and ordering from the custom shop. You could always get a 1377 to play with till you can get a custom shop order for cheaper

[SwampHunter]

Yes I have about came to the conclusion that this one isn't worth fixing lol

[BillK]

Yes I have about came to the conclusion that this one isn't worth fixing lol

For a couple of buck$ 10. or so, you can repair the valve, pump cup, breech seal & probe O-ring.  That would renew an old shooter that you may appreciate years from now.
Agreed that it isn't a candidate for upgrading but, renewing is always a good thing.

[Matchstickshooter]

Yes I have about came to the conclusion that this one isn't worth fixing lol

put it in the member classifieds!  worth it to someone!

I had one given to me a couple of years ago...it is my 1322 Rear Cocker carbine now!

[moorepower]

Yes I have about came to the conclusion that this one isn't worth fixing lol

They are worth fixing, just not heavy modding. My .22 rear cocker is still fun to shoot.